Rigid foam - Import export

Dr. Paul Lohmann® offers Potassium Acetate as powder, fine granules and granules in food/pharma/chem. pure grade. For pharmaceutical applications, it is used for parenteral nutrition. For biopharmaceutical applications, it is used as pH buffer in purification processes. For food applications, it is used as acid regulator. For industrial applications, it is used as an isomerization catalyst for the production of rigid polyurethane foams. Specific fire extinguishing agents and the modification of catalysts are further areas of application. CAS 127-08-2 EINECS 204-822-2 Dr. Paul Lohmann® carries out product and application development in close cooperation with customers. This includes the adaptation of chemical and physical parameters such as bulk density, wettability, particle size, purity or pH-value.

STIFERITE BB a high performance insulation board manufactured from CFC or HCFC free closed cell Polyiso (PIR) rigid foam, covered on both sides by reinforced bitumenous paper. Produced by a company certified with systems ISO 9001, ISO 45001 and ISO 14001. CE conformity marking on the entire line.

STIFERITE Class SK a high performance insulation board manufactured from CFC or HCFC free closed cell Polyiso (PIR) rigid foam, covered on both sides by saturated fibre glass facers. The Class SK panel is suggested for external insulation walls in ETICSystem applications, correction of thermal bridges and porticoes. Panel used in ETICSystems with certification ETA Produced by a company certified with systems ISO 9001, ISO 45001 and ISO 14001. CE conformity marking on the entire line.

STIFERITE GTE a high performance insulation board manufactured from CFC or HCFC free closed cell Polyiso (PIR) rigid foam, covered by a GasTight multilayer aluminium foil facer reinforced on one of the sides by glass netting. The GTE panel is suggested for insulation of pitched roofs or flat roofs under synthetic mantles, walls, normal and heated floors, and applications requiring a vapour barrier. Produced by a company certified with systems ISO 9001, ISO 45001 and ISO 14001. CE conformity marking on the entire line.

STIFERITE GT a high performance insulation board manufactured from CFC or HCFC free closed cell Polyiso (PIR) rigid foam, covered on both sides with a special facer named Duotwin®. The GT panel is suggested for insulation of pitched roofs, flat roofs under cement slabs or synthetic membranes or bituminous glued, parameter walls, civil and industrial floors. Produced by a company certified with systems ISO 9001, ISO 45001 and ISO 14001 CE conformity marking on the entire line.

The key areas of application for this group of PU products are determined by their excellent insulation properties. As highly cross-linked foams (usually with closed cells), they are used in the construction industry, sanitation industry and also in the refrigeration industry. Typical properties Moulded part density of 35–120 kg/m³ Available foaming agents: pentane, hydrofluorocarbons (such as 365/227mfc) and water Special formulations and versions Good heat insulation (lambda value from 22 mW/mK) Spray systems – flame protection formulations Construction industry: DIN 4102 B2, Swiss V

Rigid boxes with foam separators

ALWA acryl sealer is used to seal porous surfaces, such as wood, gypsum and rigid foams (not suitable for polystyrene foam). The primer dries in the air and forms a strong film. Apply a thin layer of ALWA acryl sealer evenly with a brush. If 3 % hardener powder is added, the curing process can be reduced to approx. 30 min.

The rectangular counter "Brilliant" is a high-quality, lightweight and very robust counter in straight form. The sales counter is optionally available with or without bar top and is equipped with a shelf. Due to the quality workmanship of the foldable aluminium base frame, the trade fair counter is particularly characterised by high stability, quick assembly and a large advertising space. The panels made of 3 mm PVC rigid foam are excellent for labelling and easy to install and remove. Furthermore, the promotion counter is completely foldable and comes with a transport bag.

Load capacity: 125 kN test load EN 124. Material: Frame and cover in 2 mm cold-formed precision steel profiles. Hot-dip galvanised. Insulated version, consisting of: Z-brackets, EPDM seal, polyurethane rigid foam insulation panel coated with aluminium on both sides. Thermal resistance = 3.2 m2 K/W Thermal coefficient 0.3 W/m2 K (=RC Warde) Features: Sealed cover with inlaid insulation panel. Tapered design allows easy opening. Virtually invisible when installed. Robust steel mesh reinforcement. The Lift-Off opening system: Every HAGODECK Type BV thermo cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: For areas inside buildings where a cover with insulation properties is required. Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding...

Frcgen* R-22 is an HCFC refrigerant that operates with high pressure but low compressor displacement. Frcgen# R-22 is popular in residential, commercial and industrial applications. Frogen# R-22 is also used as an intermediate to produce fluoropolymers and as a blowing agent in rigid foam applications.General InformationASHREA ft R-22Class HCFCRefrigerantT Pure FlutdTypeLubrication Mineral OilCharging _ .....The system must be evacuated before charging.Use of R-22 is being phased out glcoally- consider the use of Frogen# R407C, Frcgen* R422D. or FrogenG R507. Nonflammable at ambient temperature and pressure, ether-like smell. Always use in accordance with the Material Safety Data Sheet <MSDS).

Key Specifications/ Special Features:Application:R141B refrigerant gas can substitute cfc-11 as foaming agent for rigid or soft PU foam without changing process and equipment or substitute CFC-113 as metal cleaner and solder-remover as well Physical and chemical properties:Under normal temperature and pressure, the product is a colorless, odorless and nontoxic gas Its melting point is -1604C, its Boiling point is -40.8®C and its liquid density is 1.213g/cms at 204C Its mixture with air is nonflammable and free of explosion risk It shows good thermal and chemical stabilities under normal conditionsStorage and transportation:The product is packed in appropriate cylinders or tanks (or tank cars) It is to be kept hi cool and dry place, without being exposed to heat source, sunlight and raining It is to comply with the regulations of railway and road transportation issued by Chinese government concerning hazardous cargo Packing specifications:

STIFERITE Isoventilato a high performance insulation board manufactured from CFC or HCFC free closed cell Polyiso (PIR) rigid foam, covered on the top side by a water impermeable and vapore permeable Laminglass facer, and on the botton side by a saturated mineral fibre facer. Incorporated into the foam of the Isoventilato panel are wood (OSB3) laths that run along the entire length of the top side of the panel. The Isoventilato panel is suggested for insulation of ventilated roofs. Produced by a company certified with systems ISO 9001, ISO 45001 and ISO 14001. CE conformity marking on the entire line.

STIFERITE AI6 Edilizia a high performance insulation board manufactured from CFC or HCFC free closed cell Polyiso (PIR) rigid foam, covered on both sides by a 60 μm thick embossed aluminium facer. The STIFERITE AI6 panel is suggested for walls and floors. Ideal for applications requiring a vapore barrier. Available in AI8 version, embossed aluminium facer of 80 µm. Produced by a company certified with systems ISO 9001, ISO 45001 and ISO 14001. CE conformity marking on the entire line..

STIFERITE Class S a high performance insulation board manufactured from CFC or HCFC free closed cell Polyiso (PIR) rigid foam, covered on both sides by saturated fibre glass facers. The Class S panel is suggested for insulation of flat roofs under synthetic mantles inview or weighted down and under bituminous mantles applied cold (not torched), pitched roofs, walls and floors. Also available in version Class SH with compression strength resistance of 200 kPa Produced by a company certified with systems ISO 9001, ISO 45001 and ISO 14001. CE conformity marking on the entire line.

STIFERITE Class B a high performance insulation board manufactured from CFC or HCFC free closed cell Polyiso (PIR) rigid foam, covered on the top side by a bitumenous mineral fibre facer, ideal for hot torch applications, and saturated mineral fibre facer on the bottom side. The Class B panel is suggested for roofs under bituminous waterproofing mantles and where high resistance to a flame torch is required. Available in Class BH version, with compressive straight resistance of 200 kPa Produced by a company certified with systems ISO 9001, ISO 45001 and ISO 14001. CE conformity marking on the entire line.

STIFERITE FIRE B a high performance insulation board manufactured from CFC or HCFC free closed cell Polyiso (PIR) rigid foam, covered on one side by a mineralized fibre glass facers, and the other, to be positioned on toward the side more exposed to the risk of fire, by fibre glass with additional mineral fibre named STIFERITE FIRE B facer®. Specifically suggested for insulation of ventilated facades (it meets the requirements of the Technical Guide of “Anti fire safety requirements of facades in residential buildings” dated 15/04/2013). The FIRE B panel is suggested for Insulation of walls as in “ventilated facades”. Insulation for all applications where elevated fire reaction performance as in organic material insulation is required. Produced by a company certified with systems ISO 9001, ISO 45001 and ISO 14001. CE conformity marking on the entire line.

Board refers to sheet or plate, Boran Reklam uses uv flat printing on the board up to 205x305 cm. at once. So that the advertising image will be shown on the flat board material. Direct printing on PVC foam surface gives great results with high resolution printing techniques. Product name : Printed PVC Foam Material : PVC foam board ,corrugated board,plastic sheet,acrylic board, corflute board. Thickness : 1mm , 2mm, 3mm, 5mm, 8mm, 10mm up to 50mm. Pvc foam size: Biggest size is 205x305 cm. image type: custom image Function & Application 1. Uv resistant & waterproof 2. Indoor or outdoor advertising & decoration 3. Application field: tradeshow, display, promotion, advertising,subway & bus , construstion , building . 4. Advertisement, company logo, print type : high resolution uv flatbed printing 5. Finish: 1. Matte surface 2. Single sides or two sided 3. Die cut any shape , custiom size .

As plus packing company one of our main material is EPE Polyethylene which is a lightweight, semi-rigid, flexible closed cell foam, most commonly used in packaging, for impact and shock absorption, vibration dampening, and surface protection. Polyethylene (EPE) Foam Features . Easy to shape .Absorb the damages and vibration during the shipment. .It is used in tool storage trays .It is able to apply different colors.

Optimized for machining aluminium, plastic materials in strong thickness and composite materials with high mechanical characteristics. Refer to the exemples of applications : Moulds and models Cases and boxes Plastics machining Electric vehicles parts Parts for subways Parts for trams Bus parts Trolleys Side windows Aircraft interior furnishing HIGH PRODUCTIVITY 3 axes milling equipment : Precision milling machine of simple use for machining rigid plate materials in strong thickness in the sectors of plastic, modeling, aeronautics, aluminium transformation advertising and POS or for machining 3D molds and models. Materials to be used (according to the selected spindle and tool): - Plastic in rigid plates (PMMA-PC-PS-PVC-ABS..) - Expanded plastic and alveolar plates - Rigid foams (PU- PS-…) - Semi rigid foams (KAPA line®,…) - Composite materials for building : Alucobond®, Dibond®, Reynobond®,.. - Composite materials for industry (polyester resin loaded with glass fiber, carbone...

For professionals, this 3 axis CNC milling equipment range offers an excellent price ratio/performances, in many industrial sectors. Refer to the exemples of applications : PVC signboard Moulds and models Health case or box Cases and boxes Plastics machining Electric vehicles parts Parts for subways Parts for trams Bus parts Balloons 3 axes Milling equipment : Precision milling/cutting machine (router) with simple use for machining plate materials in the sectors of advertising, sign, sign board, POP, plastics, aluminium transformation….. Some of the materials to be used (according to the selected spindle and tool) on : - Plastic in rigid plates (PMMA-PC-PS-PVC-ABS..) - Expanded plastic and alveolar plates - Rigid foams (PU- PS-…) - Semi rigid foams (KAPA line®,…) - Composite materials for building : Alucobond®, Dibond®, Reynobond®,.. - Composite materials for industry (polyester resin loaded with glass fiber, carbone fiber...) - Wood and by-products. - Polyester resins. - Light...

High productivity 4 axis multi head milling CNC machine optimized for sign applications and frontages in the building area. Refer to the exemples of applications : Aluminium frames Plastics and PVC frames Decorative friezes Building façades Milling equipment - 4 axes multi spindles: High productivity system for fast cutting of materials in plate in the building sector (facades), POP sector or fitting sector of commercial vehicles (refrigerated trucks,…). This 4 axis CNC milling machine can be equipped with a strong powered vertical electro spindle and horizontal electro spindle, adjustable on 360 degrees. Materials to be used on (according to the selected spindle and tool) : - Plastic in rigid plates (PMMA-PC-PS-PVC-ABS..) - Expanded plastic and alveolar plates - Rigid foams (PU- PS-…) - Semi rigid foams (KAPA line®,…) - Composite materials for building : Alucobond®, Dibond®, Reynobond®,.. - Composite materials for industry (polyester resin loaded with glass fiber, carbone...

For commercial buildings, coldrooms, Panelsell are able to supply sandwich panels quickly and in large quantities. Insulated sandwich panels (also known as insulated sandwich boards, or composite panels) are essentially two profiled metal sheets with an insulated layer material in between. Standardly, the outer sheets are made from steel. However, for special purposes, stainless steel or aluminium can be incorporated. The standard sheet thicknesses range between 0.5mm to 1.0mm. Therefore, it can be produced in other strengths as required. The wallpanels commonly have the Eurobox-marked profile on the sheet. However, smooth and micro-ribbed surface finishes are also possible. The standard core insulation of these composite wall panels is rigid polyuerethane foam (PU/PUR). Increasingly more popular are panels with a core insulation consisting of rockwool or polyisocyanurate foam (PIR) due to fire-protection requirements. The panels would have fire-rating classes, and involves non-combustible materials. The wall panels are assembled together in what is known as a "tongue and groove" system. The panel attachment can come as open or secret fixing. In open-fixing panels, screws that are mounted would be visible, whereas secret-fixing joints would conceal the screws when mounted. On request, we can offer the full range insulated wall panels manufactured new as tailored to your requirements in length, thickness and most RAL-colour tones. Of course, we are also able to offer you alternative special surplus stock items and cancelled orders at low prices.

For commercial buildings, coldrooms, Panelsell are able to supply sandwich panels quickly and in large quantities. Insulated sandwich panels (also known as insulated sandwich boards, or composite panels) are essentially two profiled metal sheets with an insulated layer material in between. Standardly, the outer sheets are made from steel. However, for special purposes, stainless steel or aluminium can be incorporated. The standard sheet thicknesses range between 0.5mm to 1.0mm. Therefore, it can be produced in other strengths as required. The wallpanels commonly have the Eurobox-marked profile on the sheet. However, smooth and micro-ribbed surface finishes are also possible. The standard core insulation of these composite wall panels is rigid polyuerethane foam (PU/PUR). Increasingly more popular are panels with a core insulation consisting of rockwool or polyisocyanurate foam (PIR) due to fire-protection requirements. The panels would have fire-rating classes, and involves non-combustible materials. The wall panels are assembled together in what is known as a "tongue and groove" system. The panel attachment can come as open or secret fixing. In open-fixing panels, screws that are mounted would be visible, whereas secret-fixing joints would conceal the screws when mounted. On request, we can offer the full range insulated wall panels manufactured new as tailored to your requirements in length, thickness and most RAL-colour tones. Of course, we are also able to offer you alternative special surplus stock items and cancelled orders at low prices.