Water cleaning - Import export

Domestic, agricultural, irrigation, industrial - Transfer and pressure Max temperature. water: 35º C Max sand content: 60 g/m3 Maximum starts per hour: 30 / h Asynchronous single-phase 230 V, three-phase 400 V - Class F Stator cooled with non-toxic and non-polluting mineral oil Stainless steel shaft (AISI 416) - IP 58 Protection Filter, liners, lid in 304 stainless steel Retainer and mechanical seal (aluminum axide-carbon-graphite) Mechanical seal in SIC/SIC on request Recommended for use with clean water in domestic, civil and agricultural applications, such as water distribution in combination with pressure sets, for irrigation of gardens, allotments and for increasing pressure. Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration.

Motor immersed in cooking oil, non-toxic, non-polluting. Externally cooled by the pumped liquid. Insulation class F. Motor protection IP68. Thermal sensors built into the motor winding. Recommended for use with clean water in domestic, civil and agricultural applications, such as water distribution in combination with pressure sets, for irrigation of gardens, allotments and for increasing pressure. Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration. Combination of stainless steel in the turbines with Noryl reinforced with fiberglass in the diffusers, offers excellent resistance to abrasion due to sand. Double seals, lip seals and carbon ceramic reinforced mechanical seal. Pump body, pump head and turbines in AISI304 stainless steel and shaft in AIS420 stainless steel.

Domestic, agricultural, irrigation, industrial - Transfer and pressure Max temperature. water: 35º C Max sand content: 60 g/m3 Maximum starts per hour: 30 / h Asynchronous single-phase 230 V, three-phase 400 V - Class F Stator cooled with non-toxic and non-polluting mineral oil Stainless steel shaft (AISI 416) - IP 58 Protection Filter, liners, lid in 304 stainless steel Retainer and mechanical seal (aluminum axide-carbon-graphite) Mechanical seal in SIC/SIC on request Recommended for use with clean water in domestic, civil and agricultural applications, such as water distribution in combination with pressure sets, for irrigation of gardens, allotments and for increasing pressure. Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration.

Motor immersed in cooking oil, non-toxic, non-polluting. Externally cooled by the pumped liquid. Insulation class F. Motor protection IP68. Thermal sensors built into the motor winding. Recommended for use with clean water in domestic, civil and agricultural applications, such as water distribution in combination with pressure sets, for irrigation of gardens, allotments and for increasing pressure. Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration. Combination of stainless steel in the turbines with Noryl reinforced with fiberglass in the diffusers, offers excellent resistance to abrasion due to sand. Double seals, lip seals and carbon ceramic reinforced mechanical seal. Pump body, pump head and turbines in AISI304 stainless steel and shaft in AIS420 stainless steel.

Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration. Combination of stainless steel in the turbines with Noryl reinforced with fiberglass in the diffusers, offers excellent resistance to abrasion due to sand. Double seals, lip seals and carbon ceramic reinforced mechanical seal. Pump body, pump head and turbines in AISI304 stainless steel and shaft in AIS420 stainless steel. USES: Domestic, agricultural, irrigation, industrial - Transfer and pressure Max temperature. water: 35º C Max sand content: 60 g/m3 Maximum starts per hour: 30 / h Asynchronous single-phase 230 V, three-phase 400 V - Class F Stator cooled with non-toxic and non-polluting mineral oil Stainless steel shaft (AISI 416) - IP 58 Protection Filter, liners, lid in 304 stainless steel Retainer and mechanical seal (aluminum axide-carbon-graphite) Mechanical seal in SIC/SIC on request

The PLASMEA® hygiene cloth comes from bionics research and makes it possible to keep the household hygienically clean with just water. The dirt is absorbed by the capillary action of the fibers of the plasma cloth, bound in the cloth and then released again into the water. It has been proven in the laboratory that 99% of the germs adhering to the surface are eliminated (cf. Lehner hygiene test). As a rule, the PLASMEA® hygiene cloth cleans all surfaces in just one operation, simply with water. With the PLASMEA® hygiene cloth, you can save up to 25% of the work time and greatly reduce the need for cleaning agents. How is the PLASMEA® hygiene wipe used? -Immerse the plasma sheet in water -Wring out excess water -Plasma cloth is ready for damp cleaning -Remove dirt by wiping -Dirt and grease are bound in the cloth -Dirt in the cloth does not transfer to other surfaces

The hygienic stainless steel quarter turn lock prevents bacterial attack and fulfils the strict regulations of testing principles for foodstuff machinery and hygien. The well concieved geometric form, the mirror polished stainless steel surface and the central circumferential seal reliably prevent dirt accumulation. Water, cleaning agents etc. can drain off fully and so prevent contamination. Especially in processes where the resistance of the seal to cleaning and disinfection agents is very important, optimised control cabinets, terminal boxes and command panels are a must. Specifically designed after the principles of Hygienic DESIGN, the hygienic quarter turn lock HD fulfils the strict regulations of the foodstuff processing industry and passes therefore optimally in their professional hygienic applications. The special seal is suitable for high pressure washing up to max. 100 bar and fulfils IP65/67. Furthermore, the seal is temperature stable up to 80°C and the blue

The hygienic stainless steel quarter turn lock prevents bacterial attack and fulfils the strict regulations of testing principles for foodstuff machinery and hygien. The well concieved geometric form, the mirror polished stainless steel surface and the central circumferential seal reliably prevent dirt accumulation. Water, cleaning agents etc. can drain off fully and so prevent contamination. Especially in processes where the resistance of the seal to cleaning and disinfection agents is very important, optimised control cabinets, terminal boxes and command panels are a must. Specifically designed after the principles of Hygienic DESIGN, the hygienic quarter turn lock HD fulfils the strict regulations of the foodstuff processing industry and passes therefore optimally in their professional hygienic applications. The special seal is suitable for high pressure washing up to max. 100 bar and fulfils IP65/67. Furthermore, the seal is temperature stable up to 80°C and the blue

ClearPore depth filters are a range of high efficiency melt blown depth filters available in a range of materials to ensure particulate removal from liquids when there is a wide side range of particulate contamination. ClearPore filters are manufactured from either 100% polypropylene or nylon fibers to create graded density and high contamination holding capacity. The range are available in a range of absolute or nominal removal ratings. Products are manufactured from FDA approved materials and conform to all required EU guidance of food safety. ClearPore depth filters are used in a range of industrial and F&B applications, such as bulk chemicals, industrial water treatment, cooling water, plating, parts cleaning, drinking water treatment, desalination and food & beverage applications requiring haze or colloidal removal

This protection set BC-SET-01 of the company Schönwolf is especially developed for cleaning and water work BC-SET-01 consists of following parts: 1x protective suit (SS20) of Cat. III with hood of PVC 1x pair of gloves of nitrile 1x pair rubber boots 1x safety helmet 1x safety mask (folding, helmet-attachment) 1x goggles Delivered in a fabric bag for easy transport!