Threaded screws - Import export

Indexing pin hardened: Threaded sleeve and indexing pin free-cutting steel Stainless steel version: Indexing pin hardened: Threaded sleeve 1.4305 Indexing pin 1.4034. Mushroom knob black grey thermoplastic. Thread lock blue polyamide. Version: Steel version: indexing pin hardened, ground and black oxidised. Stainless steel version: indexing pin hardened, ground and bright. Note: Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been manually disengaged. Form CP is recommended for applications where the plunger remains disengaged over a long period and the pin should be prevented from springing back. The thread lock enables the plunger to be screwed in to the exact depth required, no spacer ring is required. The thread lock is a gripping polyamide coating that is applied punctiform (spot).

Self-tapping screw for fastening, connecting sheet metal and metal profiles up to 0.9 mm Head: hemispherical with press washer, Philips slot No2, M = 4.5 5.1

Self-tapping screw for fixing gypsum fiber boards Head: countersunk with notches for cutting, Philips slot No2, M = 4.5-5.1

The economic adjustment to small batch sizes, we meet with our turned parts for the direct assembly in plastics and die-cast products. Any thread forms such as, thread-tapping (DIN7500), thread cutting (DIN 7513-7516) or KTG for direct screw in plastics are realized cost-effectively. Advantage is the elimination of high tooling costs, since no counter-thread in the workpiece (eg threaded inserts, nuts, etc.) is required because the direct assembly takes place directly into the workpiece. Only a given tube is required in order to screw it directly. Our turned parts replace previously cold formed parts used (so-called multi-station presses) which require high output volumes in order to achieve a reasonable price parts.

PT screws for thermoplastics: Thread rolling screws for direct screwing into plastics, Thread 30° or 60° KTG screws for thermoplastics: Single-start or double-start thread (high, low) Thread rolling screws are extruded for larger batch sizes and turned for small batch sizes (Turned parts for direct screwing) High tensile and highly stressable connection of thermoplastics with considerably longer life endurance Thread rolling without chips and loss of material Minimum radial tension, large thread coverage Process-reliable due to torsion strength Shorter and slimmer screws are possible. Materials: Steel, case-hardened Quenched and tempered steel 1.5523 tempered to 1000 +200 N/mm², high-grade steel 1.4567, other materials on request Length: 3 – 160 mm (at lengths from 60 mm only partial thread lengths 4 x d are possible) Thread diameter: 1.6 – 10 mm Special dimensions on request Batch sizes: Standard ex-stores Special screws from 30,000 pieces

Large Quantities: produced as cold formed parts (so-called multi-station presses), which require high output volumes in order to achieve a reasonable price parts Small Quantities: Produced as turned parts - the economic adjustment to small batch sizes Fields of application: For thermoplastics, duroplastics, light alloys, metal compounds. Industrial consumers: Electrical industry, plastics processing industry, sheet metal processing industry, telecommunications, tank- and container construction.

Other threads, screw lengths and special versions. Dimensions “H1” and “A” available in other lengths at extra charge.

Enter the desired lever colour here. The standard colours are: Black grey clamping lever, traffic red push button. Orange clamping lever, black grey push button. Traffic red clamping lever, black grey push button. Where L ≥ 60 mm the thread length is 60 mm. On request: Other threads, screw lengths and special versions. Dimension “H1” available in other lengths at extra charge. Drawing reference: 1) flat point DIN 78

Metric: Screws from M2 x 10 – M30 x 1000 with thread (up to 100 mm long). Compliant with DIN, EN, ISO, or according to drawings and samples. Plates: From ST 2.9 x 19 – ST 6.3 x 160 / 80 mm with thread (up to 80 mm long). Compliant with DIN, EN, ISO, or according to drawings and samples. KTG screws for plastics: 30-degree thread (OEB Kunst). KTG 3 x 10 mm – KTG 8 x 160 mm with thread (up to 60 mm long). DIN 7500 thread grooving screws: For die casting, zinc or aluminium. M3 x 20 – M10 x 160 mm with thread (up to 50-60 mm long) (OEB Furch). DIN 7513 – DIN 7516 thread cutting screws: For die casting, zinc or aluminium. M3 x 20 – M10 x 160 mm with thread (up to 50-60 mm long) (OEB Schneid). Other thread types: With-Worth, HiLo, UNC/UNF, double-start, triple-start.

When screwing the nuts onto the thread, the thread lock is plastically and elastically deformed. The elastic deformation causes a radial frictional lock against the nuts being loosened. The plastic thread lock is only effective when the nuts are fully screwed onto the male thread. The screw length must be selected so that at least two full threads protrude from the nut. Due to the plastic deformation of the thread lock, these nuts should only be used once.

truss head shoulder screw thread: 8-32 UNC-2A head height: 0.170 +/- 0.015 inch, head diameter: 0.500 +/- 0.015 inch rod length: 0.875 +/- 0.062 inch groove width: 0.064 +/- 0.015 inch, depth: 0.074 +/- 0.015 inch material: steel surface finish: zinc plated Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.

N ° 1 factory nova adduction head with 40 mm internal passage Top or side attachment Shaft with thread on request With adjustment screws With wear bush on gasket work area

The main purpose is to fix the parts in a plastic dowel of the appropriate diameter or: in wood, with pre-drilling, using metric fasteners (for example, fixing pipe clamps). The carving is rare, single-pass for wood on one side and metric on the other. It has a hexagon between the metric and the screw thread for tightening the screw stud.

Material: PEEK Colour: light brown - Temperature: max. 180°C - High-strength and excellent form stability - High modulus of elasticity and excellent creep resistance - Resistant to many chemicals - Flammability rating: UL94 V0 - Further PEEK products: series 280 to series 285 and 302

Applicable for higher bore hole tolerances. Suitable for blind holes or holes with and without screw threads. Fast assembly, generally no tools required. Please have a look at our series 267, too. Material: PA Colours: last digits 000 = natural last digits 699 = black

Applicable for higher bore hole tolerances. Suitable for blind holes or holes with and without screw threads. Fast assembly, generally no tools required. 2 types - removable (application dependent) and non-removable (application dependent) D = removable +/- (yes/no) Material: PA Colours: last digits 000 = natural last digits 699 = black

16 1/2" x 80" GAP BED CAPACITY. 3 & 4 JAW CHUCKS. QUICK CHANGE TOOL POST PLUS HOLDERS. 3 POINT STEADY. 2 1/2" SPINDLE BORE. 24 1/2" SWING IN GAP. 40 - 2000 RPM AINJEST RAPID THREADING SCREW GAURD