Thermal - Import export

In sizes 1/8 - M14 - M20 Switching ranges from 30 to 130 °C

Soundproof Cork Underlayment for flooring is something that most people don't think about on a daily basis unless you are in an occupation which deals with flooring. Create high performance sound control with Rubber Cork underlayment. Corck Rubber products provide superior impact noise and foot step sound reduction. Better sound reduction than many foam products and superior compression recovery performance. The high performance recycled Rubber Cork sound control underlayment may also be used with ceramic and natural stone flooring. Usage areas Sound Insulation Cork Rubber is used for controlling noise in condominiums, apartments, multifamily dwellings, commercial buildings, and other areas where footfall and impact noise can be the cause of occupant complaints. Sound insulation cork rubbers should use in; Classrooms

Soundproofing Barrier Roll allows you to enjoy the amazing sound dampening and sound blocking quality of our Quiet Barrier. This highdensity, nonporous material is one of our most popular soundproofing solutions because of its ease of use and tremendous effectiveness. Sound Insulation Barrier protects you from everyday noise; construction sounds, traffic and noisy neighbors. Soundproofing Barriers also protects dampens vibratory impact noise. When you cover your walls, ceilings or floors with Quiet Barrier Soundproofing Roll, you will enjoy clear sound inside the covered area while preventing sound from penetrating or escaping, giving you peace and privacy. Usage areas For easy soundproofing at home, recording

Soundproof Rubber Soundproof rubber floor underlayment is a high quality performance acoustic underlayment made from rubber material which is designed to provide a resilient layer to reduce the passage of impact transmission noise. The purpose of a sound control floor underlayment is to decouple the finished floor surface from the subfloor and ceiling assembly below, thus disrupting the path of structure borne noise, typically footfall. Usage areas Sound Insulation Rubber is used for controlling noise in condominiums, apartments, multifamily dwellings, commercial buildings, and other areas where footfall and impact noise can be the cause of occupant complaints. Sound insulation rubbers should use in; Classrooms, Home Theaters, Doctors Offices, Gymnasium, Fitness centers, Laundry Rooms, Quiet Rooms, Sound Recording Studios, Offices and where where where its needing to underlayment sound insulation.

Extruded section, aluminium EN AW6060. Version Hard anodised aluminium, 50 µm. Hardness 500 HV. Note The aluminium guide rail has good thermal conductivity and importantly heats only at continuously very high speeds. ** lengths L2 = 20 mm * and L = 500 mm included L2 and L only available in full mm.

Nature line thermal sandwich holder. Outside made in resistant recycled laminated paper, and isothermal inside in aluminium. With zip closure and carrying handle. Laminated Recycled Paper/ Aluminium

Thermal black wool socks, 2 pairs per pack, 15 packs per pallet.

Papo Seco Colheita Tinto 2018 Red – Denominacao de Origem Controlada (DOC) DOURO Touriga Franca (60%), Touriga Nacional (30%), Tinta Roriz (10%) Cima-Corgo Subregion (60%), Douro Superior Subregion(40%)

Papo Seco Colheita Branco 2019 White – Denominacao de Origem Controlada (DOC) DOURO Viosinho (30%), Gouveio (30%), Arinto (20%), Rabigato (20%). Cima-Corgo Subregion (50%),Baixo-Corgo Subregion(50%)

Manual arc spray equipment 300A for Zn and Zn/Al wires - hose package up 16 meters

Manual arc spray equipment 400A for Zn, Zn/Al and Al wires - high speed job - hose package 10 meters

Manual arc spray equipment 300A for Zn, Zn/Al and Al wires - hose package 10 meters

Manual arc spray equipment 300A for Zn and Zn/Al wires - hose package of 5 meters

Tin and Tin alloys wires for thermal spray

Manual Arc spray equipment of all metal wires (Cu - Ni - Inox - Mo - W - Steel -Bronze - Brass - Corten)

Door and window systems with a thermal barrier MB-70HI, MB-70US HI and a curtain wall based on the MB-70CW HI windows. Their construction is based on well-proven, well developed and highly appreciated base systems, i.e. MB-70, MB-70US i MB-70CW. Enhanced thermal insulation performance is achieved due to placing special insulating inserts in the central insulating chamber, formed by connecting aluminium profiles with thermal breaks. Thus formed inserts reduce heat transfer through this chamber due to low value of heat transfer coefficient. The central location of inserts additionally limits convection and thermal radiation.

Our knowledge and experience in your industry will make your project a success. Scharff Techniek BV is a healthy and traditional family business, founded in 1983. With a focus on steam and thermal oil, we supply installations and, if desired, we can design and install the complete network. Our customers are production companies in the food industry, (pharma) chemistry and manufacturing industry. Universities and colleges, but also training centers set up by branches. Research centers, laboratories and hospitals. We represent the quality brands Certuss, Inplan and Valsteam in the Netherlands. This guarantees stock deliveries of parts and factory service. With storage centrally located from Utrecht, so always close

The automatically functioning thermal oil boilers are designed for thermal oil with a temperature of up to 400 °C. The thermal oil boiler contains a double rear wall that cools the thermal oil and is part of the VO. This makes a high boiler efficiency of 93% achievable and you will notice this in the gas consumption. Due to the lack of a bricked rear wall, periodic checks of the rear wall are not necessary. As a result, you save on maintenance. Electric thermal oil boilers are also part of our program. All thermal oil boilers can be equipped with all common gas or oil burners both ex works and on site. the burner The installation is supplied as high/low or modulating , depending on the capacity of the Inplan thermal oil boilers .s

These are specific materials for use in the thermoelectric sector and in thermo-mechanical applications. The range includes: Mica Continua Muscovite / Phlogopite is available in rigid or flexible sheets, tubes and / or shaped particles according to customer specifications. The main applications are in the following sectors: household appliances, packaging, lighting and electric heaters. Cementitious or calcium silicate based asbestos substitutes for all thermo-mechanical applications up to 1000 ° C Antistatic laminate to be used as a soldering template for printed circuits Misoglass1 / Deltherm1 have been designed to be used in all applications where thermal insulation is required under compressed conditions.

Do not hesitate to contact us for your requests for industrial and HVAC insulation tools, insulation rockwool, foamglass, aluminium foils etc... www.soliso.fr screiche@soliso.fr +33.6.76.18.78.74 (Whatsapp)

InfraCam® of the manufacturer FlirSystems® is with only 550g very light and easy to operate. It is suitable for indoor and outdoor. Through precise high resolution of InfraCam® slight temperature differences are recognized clearly. A high quality, cost-effective inspection device with an operating time of seven hours. Over 50 years experiences in development and production of infrared cameras influenced the development of this new revolutionary model. Rapid developments in detection technology enabled to a small, compact, easy to operate and extremely favourable diagnostic tool. This technology that was so far in high-end infrared cameras and only accessible for limited users, is now open up to a larger circle of users thanks to InfraCam®. Now, InfraCam® produces and saves infrared pictures, which can be easily analysed due to updated software "ThermaCam QuickView". This software is included in delivery of scope of InfraCam®! Datenblatt

The Eagle 320 is the latest enrichment in the range of thermal imaging technology and is provided with a camera sensor made of amorphous silicone. The temperature gauge takes place standard in digital form as well as in form of bar charts on the display. The mode "Temperture Awarness Colourisation“ represents a temperature analysis controlled by software, which is suitable during the course of operation at fire scenes Eagle 320 is available with two-channel transmitter, which allows transferring images to a receiving station/monitor outside of the place of action. 10cm LCD, definition: 320x240 Pixel Rechargeable battery, incl. charger 4,5h operating times of battery, status display 4-times zoom For usage standing up, crawling and suitable for free hands Weight: approx. 1,8kg Prices on request! Data sheet

EagleAttack of Scott is durable, light thermal imaging camera. Easy to use and became indispensable for fire brigade, police as well as in security sectors. The sensors functionates with a definition of 160x120 pixels, frame rate of 60Hz and a dynamic blend circuit, that reacts up to 600°C. Technology of EagleAttack uses a vanadium oxide- microbolometer for clearer image display and it allows taking pictures clearly identifiable and extraordinary differentiated with the camera. EagleAttack is provided with NiMH-battery, operating time of 2 hours. AA-batteries can be used as well. Battery is inserted to table charger of Scott Eagle X for charging. Optionally, battery charger (TCS) is available whereby the camera can be fixed to. The battery is charging while situated in handgrip of camera. EagleAttack can be fixed to shoulder strap and can be carried along in mode of “ready to shoot”. Decide to easy, reliable and affordable thermal imaging technology! Prices on request!

The innovative technology of thin-layer thermo-reflective coating systems will change the market for both business and individual Customer. WHY SWISS THERMO COATINGS? Compared to traditional insulation materials that slow down the flow of heating energy, it is extremely effective in protecting our rooms against overheating and heat loss. The coating, reflecting up to 94% of infrared radiation, is the basis of the "cold wall" and "cold roof" technology, which triggers a number of physical phenomena, leading to significant savings and improving the health and comfort of the building users. The coating based on polymers, containing microspheres, creates a durable and flexible layer, perfectly protecting the substrate. It is fully waterproof and vapor permeable. SWISS THERMO thin-layer insulation systems are perfect for all industries. The coatings are available in a full range of colors, as well as in a transparent version.