Results for
NORELEM FRANCE
France
Lengths, diameters, forces and colour correspond to ISO 10243. F1 indicates the load on the spring for a long service life with spring travel of 25% of L0. F2 indicates the load on the spring for a medium service life with spring travel of 30% of L0. Fmax. indicates the maximum load rating of the spring with spring travel of 40% of L0. F = force required to compress the spring 1 mm.
Request for a quoteNORELEM FRANCE
France
Individual filled gas springs are excluded from replacement. Gas springs are maintenance-free, self-contained systems that are filled with nitrogen under high pressure. For end-of-travel damping and lubrication, a defined amount of oil is also contained inside. The gas springs contain a nonreturn valve in a threaded pin on the pressurised pipe, which allows the pushing force to be lowered at a later time. Gas pressure springs in the sizes 04/12 and 06/15 must be stored and installed with the piston rod extending downwards. As of size 08/19, storage and installation in any orientation is possible. Keep in mind, however, that end-of-travel damping is effective only when the piston rod extends downwards. As a consequence of the physical properties when filling a gas spring, a tolerance range of ±5 % results for the rated pushing force. Gas springs are filled with nitrogen under high pressure and under no circumstances should they be opened or overloaded.
Request for a quoteNORELEM FRANCE
France
The lateral spring plunger must be pressed into the hole to at least depth L3. These plungers are for positioning and holding small parts in fixtures. If mechanical machining of the workpiece is to be carried out, other clamps may be necessary. When the fixture is not in use it should be ensured that plastic springs are not under stress. Spring force refers to a mean value.
Request for a quoteTEMAS GROUP EXPORT PARTNERS
Turkey
ALFAMAK is one of Turkey's leading gas spring manufacturers. Established in 2003, our company has been operating in the industry for 19 years and has gained a reputation for success. Gas spring is a new technology which comes instead of standard steel or polyurethane springs. A gas spring has a container of compressed Nitrogen gas with Piston Rod , Bush, Rod Rings, Valve etc. The Gas Springs are used in Cold Stamping industry to form, cut and fix the sheet metal inside the die. Many auxiliary materials are used for different purposes in the gas spring. Rod wiper, rod guide and rod seal are used on the inner surface of the bush. The purpose of the rod wiper is to prevent the oil and chips in the die from entering the gas spring. The rod guide is used to carry the load in case of axial force on the rod during use. The most important auxiliary material for sealing is rod/piston seal. It directly affects the performance of the product by keeping the gas in the gas spring.
Request for a quoteNORELEM FRANCE
France
Black. Pan head screw and retaining plate electro zinc-plated. Note: Magnetic catch for swing and sliding doors. The elongated holes enable flexible positioning on aluminium profiles and panel elements. Drawing reference: 1) Pan head screw 2) Retaining plate
Request for a quoteNORELEM FRANCE
France
Quick catch for various applications such as holding doors, hatches, screens etc. closed. The double ball catch consists of a housing and a latch bracket that engages between the two balls. The latch bracket can engage from the front or the side. The engagement pressure is adjustable. Drawing reference: 1) counterbore DIN 74-A
Request for a quoteNORELEM FRANCE
France
Sleeve and spring stainless steel. Ball stainless steel or POM. Version: Sleeve bright. Steel ball hardened and bright.
Request for a quoteNORELEM FRANCE
France
These spring plungers are chiefly used as ejectors and spring stops in machine construction. The thrust pin is actuated in the axial direction. Drawing reference: 1) grub screw glued in
Request for a quoteNORELEM FRANCE
France
Sleeve steel grade 5.8. Thrust pin POM. Spring grade D steel wire.
Request for a quoteNORELEM FRANCE
France
Sleeve 1.4305. Thrust pin 1.4034. Spring 1.4310. Version: Bright. Thrust pin hardened.
Request for a quoteNORELEM FRANCE
France
Sleeve 1.4305. Ball 1.4034. Spring 1.4310. LONG-LOK thread lock, Nylon.
Request for a quoteNORELEM FRANCE
France
The combination of excellent material properties is a special feature of silicon nitride (Si3N4). These include high resiliance and stability, excellent wear properties and good chemical resistance.
Request for a quoteNORELEM FRANCE
France
Sleeve steel grade 5.8. Ball steel. Spring grade D steel wire.
Request for a quoteNORELEM FRANCE
France
These eccentric bushes can be used as e.g. stops or tolerance compensators. 1) DIN 332-1 centre bore, Form A 2) Basic form with centring 3) With scale groove for visual stop 4) Through hole 5) Tapped hole Advantages: Easy handling Grub screw clamping Minimal installation space Arbitrary mounting position Customised application Versatile use
Request for a quoteNORELEM FRANCE
France
Eccentric bushes enable lateral spring plungers to be precisely positioned with regard to the workpiece.
Request for a quoteNORELEM FRANCE
France
The nominal diameter of the pin is the same as the receiving hole diameter. The recommended hole tolerance is ISO H12. Due to the chamfered end, the pins can be inserted easily into the hole with a hammer or using automatic placement. After insertion, the plus tolerance of the pins results in a vibration-proof seating. The pins can be easily removed using a mandrel and reused several times. The pins can transmit high shear forces and are resistant to shocks and impacts due to their spring properties. The values specified for the shear force only apply to spring steel.
Request for a quoteNORELEM FRANCE
France
Aluminium 6060 T5. Cover plug PA 6.6. Version: Black anodised. Colourless anodised. Note: These hinges have stainless steel tension springs which enables doors and hatches to open or close automatically. Opening angle 270°. Spring torque opening: M(0°): 0.7 Nm / M(90°): 0.5 Nm / M(180°): 0.3 Nm Fastened with DIN 7991 countersunk screws.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
MAGAGER, UNIPESSOAL, LDA
Portugal
5 Nozzle Scarifier with small anchors Reinforced with double springs. Width 1.20 m Working width 1.13 m
Request for a quoteMAGAGER, UNIPESSOAL, LDA
Portugal
5 Nozzle Scarifier with small anchors Reinforced with double springs. Width 1.00 m Working width 0.93 m
Request for a quoteEMPIRE MEUBEL
Netherlands
Enjoy a good night's sleep with this box spring frame! It is a welcome addition to any bedroom. Durable Material: The fabric has a simple and clean look and is breathable and durable. Supporting legs: The bed is supported by sturdy legs, which provide stability, safety and sturdiness. Plywood slatted base: The plywood slatted base provides good weight distribution, so that the mattress stays in place when you move in your sleep.
Request for a quoteRM2M
France
1 central textile carrying element Flexible bare copper conductor class 6 (class 5 from 50mm²) Yellow polyurethane sheath -40 to +80°C 0.6/1kV Mechanical strength: 35 N/mm² of copper cross-section Resistant to hydrocarbons and UV Halogen-free Flame resistant Bending radius according to VDE 0298 Part 3 Colour coding according to VDE 0293 up to 5 conductors. Conductors numbered from 7 conductors + earth conductor.
Request for a quoteRM2M
France
RM2M offers a range of spring hose reels for fluids with either a fixed or swivel wall mount. The range is as follows: Painted steel reels. Maximum capacity 30m in 1''. Also available with 3/8'', ¼'', 1/2'', and ¾'' hose. For water and air. Maximum pressure 20 bar. Also available in 304 stainless steel version (not for food processing). Versions for hot water 130°C – 100 bar. Versions for hot water 130°C -200 bar. Versions for hot water 130°C -400 bar. Versions for oil 150 bar. Versions for grease 600 bar. Versions for diesel 10 bar. Versions for ADBLUE 10 bar. Versions for two identical hoses (simultaneous circulation of air and paint, for example). Versions for welding. Versions for LPG or methane. In addition to spring-retractable models, we can also offer motorized versions (hydraulic, pneumatic, electric (24VDC)) or manual versions with handle.
Request for a quoteEMPIRE MEUBEL
Netherlands
Delivery 5 - 10 working days The Shurgard box spring is a single bed with built-in storage space and has a modern and luxurious design. This gives the bed a stylish and striking appearance. It has an 8-button headboard and has a total width of 90 centimeters and a length of 200 centimeters. Furthermore, the storage space has a capacity of no less than 540 liters. Durability The Dreamhouse box springs are made of high-quality material and also have an excellent level of finish, making them durable in use and allowing you to enjoy them for years to come. The sleek and modern design then ensures that it fits into any interior and that you can also take it with you when you move. Would you like to use our assembly service? Please contact us at info@empiremeubel.com.
Request for a quoteEMPIRE MEUBEL
Netherlands
Elegant and modern look. A size of 140,160,180 x 200 centimeters. A maximum load capacity of 130 kg per side. Included pocket spring mattresses with 7 comfort zones. Supplied top mattress of 5-6 cm thick. A smart storage space with a capacity of 840, 960 or 1080 litres. Sleek and beautiful design. A headboard in the same color as the entire box spring. User-friendly and quick installation. Skin-friendly and anti-allergenic material. Durable and longer service life. Built-in spring mechanism for safe use. At Empire furniture you can have the double box spring mounted for a competitive price. The box spring is also brought to the desired floor and fully assembled. After the bed has been assembled, we will neatly take away the packaging material and you can enjoy a brand new bed! Would you like to use our assembly service? Please contact us at info@empiremeubel.com. 2x Dreamhouse pocket spring mattress. 2x Dreamhouse bottom box with storage space.
Request for a quoteEUROPONTEX IMPORTAÇÂO & EXPORTAÇÂO
Portugal
Contact us to get a quotation today!
Request for a quoteIDEZ AUTO PARTS
Turkey
GAS SPRINGS FOR PASSENGER SEATS AND DRIVER SEATS BUS AND TRUCK SPARE PARTS ORIGINAL OR AFTERMARKET. ATEGO, AXOR, ACTROS, TRAVEGO, TOURISMO, SETRA, NEOPLAN, TOURLINER BUSES AND TRUCK SĞPARE PARTS.
Request for a quoteMETINLER KONFEKSIYON ANONIM ŞIRKETI
Turkey
Let's produce for you....
Request for a quoteResults for
Spring - Import exportNumber of results
31 ProductsCompany type