Rotator - Import export

Cylinder with double piston rod as anti-rotation device against linear movement of the piston rod. Design based on ISO standard. Available sizes diameter: 32, 40, 50, 63, 80, 100 mm.

The UNI lock mounting clamps can be installed in any position on machine tables, fixtures or workholding equipment (tooling plates, cubes, tombstones etc). The modular design enables the number of clamps and distance between them to be ideally adjusted to suit the clamping task. The clamps can be supplied with or without rotation lock. The high clamping forces are generated by the integrated spring package (the unit clamps when depressurised). Compressed air is applied to release the clamp. The following holding forces are possible with the UNI lock clamping bolt in conjunction with M10, M12 or M16 fastening screws: Holding force (M10) 35,000N Holding force (M12) 50,000N Holding force (M16) 75,000N Supplied with: 1x clamping module incl. 6 fastening screws. 6x screw protection caps. 2x air connection O-rings. 1x installation O-ring.

Outer body steel. Mounting bush plastic. Version: Steel electro zinc-plated. Note: Rotation dampers are maintenance-free, ready-to-install elements for the controlled braking and damping of rotational or linear movements. These rotation dampers enable the smooth opening and closing of small covers, compartments and drawers. They protect sensitive components and can also raise the quality and value of products. The rotation dampers brake right or left rotations or in both directions. One cycle rate corresponds to one 360° right rotation and one 360° left rotation. Attention: The rotation damper bush should not be used as a support, but rather as an external guide or bearing.

Compact and light design, full loading on all sides. 4x safety factor against breakage in all loading axis. Rotatable 360°. Link swivel range max. 180°. The ball bearing allows the ring to rotate even under load. Lifting or securing loads, swivel rings have many uses. For the loading capacity to be valid it must be ensured that the ring is in line with the load. The swivel face must lie flat on the support beam and the screw must always be screwed in fully.

revolving shaft material: free-cutting steel finish: plated with white zinc edge milled, side tapped with thread Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.

N ° 1 new factory rotation head Max torque variable from 2000 to 3200 kgm depending on the motors installed Speed ​​from 10 to 100 rpm with 150 lt / 1 'of oil 2000 kgm @ 50 rpm 1000 kgm @ 100 rpm with 300 lt / 1 'of oil 2000 kgm @ 100 rpm Floating shaft adduction head Flange under the head with thread to be agreed

New factory rotation head with two motors Max torque 720 kgm in 1st gear; 360 kgm in 2nd gear 2 speeds: 1st gear 0-60 rpm 2nd gear 0-120 rpm pulling capacity: 20 tons Floating shaft with internal passage 40 mm air / water / mud adduction head with 40 mm passage 3 '' 1/2 AR underhead thread Ideal operation: 130 lt / 1 'oil Pressure 200-220 bar

N ° 1 Ellettari brand rotation head, Ek 1500 model Drive by 2 piston motors in closed circuit Internal 3-speed gearbox Floating shaft with internal passage 55 mm Adduction head with internal passage 60 mm Underhead flange with s '' 1 / "API or 3 '' 1 /" IF thread Max torque 1500 kgm Maximum speed up to about 500 rpm All new internal gears New bearings New gaskets The details of the characteristics vary according to the combination of gears installed, the engine displacement and the amount of oil available Overhauled like new

N ° 1 Beretta brand drilling rig, model T41 Year 2004 CE certified Hatz 4L41C engine, power 45 KW (61 hp) soundproofed N ° 4 oversized stabilizers to ensure perfect stability Stroke for 3 m long rods Maximum pull 4 tons Rotation head with max torque 650 kgm; 2 motors Double vice with max passage 220 mm Winch Possibility to install tower extension Foam pump / clear water, flow rate 30 lt / 1 ', pressure 50 bar Screw pump with max flow rate 120 -150 lt / 1 ', pressure 20 bar Weight class 3000 kg Immediately available

N ° 1 Ellettari brand drilling rig, model Ek 200B Year of construction: 2010 CE certified Deutz diesel engine, model F5L 914, power 95 hp Stroke for rods 1.5 / 3m long - modular mast Max pull 4400 kg Rotation head with max torque 750 kgm; 5 speeds. Maximum speed 490 rpm Floating shaft with internal passage 40 mm Double vice with max passage 50-260 mm counter-slide to adjust the vertical position of the tower: stroke 400 mm approximately Hydraulic winch with max pull 1000 kg @ 1st layer Foam pump / polling pump: triplex 80 lt / 1 ', pressure 40 bar track control panel with remote cable Positioning control panel on the machine Control panel for drilling on articulated arm Overhauled and repainted Weight class: 5 tons Excellent movements Compact and powerful For micorpoles - anchors - geognostic probes and vertical drilling Conditions like new Viewable at our office Price upon request

We would be glad to manufacture shirts for your brand....

DROP '’N POP displays comprise few interlocking corrugated board components with a clever mechanism and ensure quick and easy handling at the POS. The special feature of the elliptical column is a rotating poster that generates motion and attention.