Forming - Import export

Large Quantities: produced as cold formed parts (so-called multi-station presses), which require high output volumes in order to achieve a reasonable price parts Small Quantities: Produced as turned parts - the economic adjustment to small batch sizes Fields of application: For thermoplastics, duroplastics, light alloys, metal compounds. Industrial consumers: Electrical industry, plastics processing industry, sheet metal processing industry, telecommunications, tank- and container construction.

Compact short-stroke cylinder with a diameter of 20 in a rectangular block shape with mounting holes on the front.

CNC sheet metal processing, CNC laser parts, stamped parts, fine stamped parts, bent parts, pipe processing, cold forming, heat shielding sheets, deep-drawn parts, sheet metal parts from progressive dies, sheet metal parts assembled, sheet metal parts with surface treatment, sheet metal parts in large series, one-off production, prototypes.

The AT multi-turn actuators are characterized by their compact shape and clear design. Integrated grooves for sensor mounting. Angle of rotation from 0° to 180°.

The economic adjustment to small batch sizes, we meet with our turned parts for the direct assembly in plastics and die-cast products. Any thread forms such as, thread-tapping (DIN7500), thread cutting (DIN 7513-7516) or KTG for direct screw in plastics are realized cost-effectively. Advantage is the elimination of high tooling costs, since no counter-thread in the workpiece (eg threaded inserts, nuts, etc.) is required because the direct assembly takes place directly into the workpiece. Only a given tube is required in order to screw it directly. Our turned parts replace previously cold formed parts used (so-called multi-station presses) which require high output volumes in order to achieve a reasonable price parts.

Tempered, black oxidised. Precision diameters ground.

Coupling stainless steel 1.4057. Screws stainless steel 1.4301. For applications that require a small construction volume and low surface pressure. The keyless locking coupling can be fully recessed in a hub connection. for shaft diameters 6 20 mm suitable for hubs with low wall thickness minimum axial offset possible selfcentring Assembly Lightly oil keyless locking coupling on the tapered faces and contact points of the shaft and hub. Do not use MoS2 or grease. Insert keyless locking coupling in the hub seat and slide onto shaft. Tighten screws crosswise in several increments to the defined tightening torque. Dismantling Remove all screws and screw into the extraction threads of the front flange. Tighten screws crosswise in several steps until the keyless locking coupling loosens. Tolerances Shaft Recommended tolerance h8. Surface quality Rz ≤ 16 µm. Hub Recommended tolerance H8. Surface quality Rz ≤ 16 µm.

Particularly compact selfcentring keyless locking coupling without axial offset. for shaft diameters from 8 to 85 mm for medium torques suitable for hubs with low wall thickness no axial offset selfcentring Assembly Lightly oil keyless locking coupling on the tapered faces and contact points of the shaft and hub. Do not use MoS2 or grease. Insert keyless locking coupling in the hub seat and slide onto shaft. Tighten screws crosswise in several increments to the defined tightening torque. Dismantling Remove all screws and screw into the extraction threads of the front flange. Tighten screws crosswise in several steps until the keyless locking coupling loosens. Tolerances Shaft Recommended tolerance h8. Surface quality Rz ≤ 16 µm. Hub Recommended tolerance H8. Surface quality Rz ≤ 16 µm.

Shrink disc to connect a hollow hub to a shaft. They are mounted on the OD of the hub and generate pressure on the hub wall by reducing the ID with wedgeformed rings, creating a press fit between the hub and shaft. They are suitable for static, dynamic and shock loads. for extremely high torques no axial shaft/hub offset when assembling selfcentring The version 23380014072 has high tensile ISO 4762 screws. Assembly Remove existing transportation locks. Clean and lightly oil shaft, internal and external hub diameters. Do not use MoS2 or grease. Slide shrink disc onto hub. Then slide unit (shrink disc/hub) onto shaft and position correctly. Gently tighten clamping screws one after the other by hand. Then use a torque wrench to tighten the clamping screws crosswise in several increments to the defined tightening torque MS. 1st increment approx. 33% MS 2nd increment approx. 66% MS

Unshielded system. The magnets can be mounted by pressfit or gluing. 1) magnetic face

ALFAMAK is one of Turkey's leading gas spring manufacturers. Established in 2003, our company has been operating in the industry for 19 years and has gained a reputation for success. Gas spring is a new technology which comes instead of standard steel or polyurethane springs. A gas spring has a container of compressed Nitrogen gas with Piston Rod , Bush, Rod Rings, Valve etc. The Gas Springs are used in Cold Stamping industry to form, cut and fix the sheet metal inside the die. Many auxiliary materials are used for different purposes in the gas spring. Rod wiper, rod guide and rod seal are used on the inner surface of the bush. The purpose of the rod wiper is to prevent the oil and chips in the die from entering the gas spring. The rod guide is used to carry the load in case of axial force on the rod during use. The most important auxiliary material for sealing is rod/piston seal. It directly affects the performance of the product by keeping the gas in the gas spring.

Ball end locating pins are specially designed to ease the locating process. The tendency to jam, caused by the locating hole not being at right angles to the pin or by the pushing force not being parallel to the pin axis, is minimized by the ball-end form (see illustration).

Hardened and ground (HRC 56 +2). Note: The locating pins can be easily removed with an extractor.

The rest pads can be used both as a stable and precise support and as a stop. The pin form of the rest pad also allows it to be used with components with constricted support points.

Form tea with apricot, 12 packs per pallet.

Mixed form tea, 12 packs per pallet.

Composites are engineered materials made from two or more materials with significantly different physical or chemical properties. Their mechanical and physical properties depend on the type and proportion of the base materials and the parameters of the manufacturing process. Due to composites, very light and durable plastic parts can be produced. Composites may be prepared as layers , fibers, particles or penetrating composites , but the actual composite material usually only arises during the shaping process in the tool . FRIMO has extensive technical expertise and many years of experience in developing and manufacturing plants and tools to process composite materials such as CFK, GFK, NFPP, HFPP, LFT, GMT and BMC and supplies for the production processes such as RRIM, SRIM / GMPU, Long Fiber Technologies, NFI, or RTM tailor-made manufacturing equipment.

The combination of multiple technologies/procedures in one step is called OneShot technology. Semi-finished products (e.g. renewable raw materials such as natural fibers) and decorative materials (e.g. textiles) have to be handled in one production step to finish a component, such as a door panel. FRIMO has developed a modular system that allows for simple and customized configuration of a OneShot plant with all necessary tools. The following units can be integrated into such a plant: feeding station, heating station, calibrating station, material assembly station, press with OneShot tool, part-removal station.

"Combi" tools allow different technologies to be combined in a single step (in one tool) for more efficient plastic component production. Typical technologies applied in combined processes (depending on the requirements) are foaming, forming, laminating, edge folding, punching and joining. These processes allow different materials and material combinations to be used. "Combi" tools enable a very fast and cost-effective production process with minimized space requirements. Based on their longtime expertise and completion of numerous serial projects, FRIMO is able to supply optimized tooling solutions that perfectly meet the product and customer requirements. These range from small tools to special tools for large components for a nearly unlimited range of plastic applications. Our tools are available in steel or cast steel, as well as in aluminum, cast aluminum or nickel shells. For special applications, FRIMO also offers tools with interchangeable inserts, allowing the most efficient

ASM model is made of cast iron construction. ASM machines are combining the user friendly features, quality and best prices as an economical model. ASM - 3 Rolls Asymetical Plate Roll Machine Standard Details Body is made of cast iron construction Central rollers powered with electric motor, gearbox and gear drive Cone bending device Self brake main motor Upper roll is opanable by side Lower roll and back roll are with hand wheels up & down adjustable. Separate eletric control panel with foot pedal Suitable for CE, ISO 9001-2008, TSEK and TURQUM certificates ASM - 3 Rolls Asymetical Plate Roll Machine Optional Features Induction hardened rolls. Back roll with motor. Digital display.

This Geka Hydracrop 110S is a versatile and economic universal steelworker with 2 independent hydraulic cylinders, 2 areas and 5 workstations. It is suitable for punching profiles and for mounting special equipment. It benefits from a greater speed backed by a powerful hydraulic unit. Geka Hydracrop 110S Standard Details Machines driven by two cylinders 5 work stations, fitted with tools for L, shearing, round and square bars, rectangular notching and punching Quick change punch Flat bar shearing table with adjustable guides 2 simultaneous work stations Greater speed backed by a powerful hydraulic unit Special equipment for approaching at reduced pressure and slow speed Precision punching table with X & Y measuring stops Precision notching table with X & Y measuring stops Ready for production pack comprising: One meter "touch & cut" length stop with fine adjusting Lamp for enhanced vision of cutting zones 10 sets of round punches and dies

SCHOCK’s core competencies include roll forming technology with a large number of integrated processes. With our roll forming technology we are able to produce individual and high-precision profiles or complete assemblies for our customers.

TECHNICAL DATAPARAMETER Speed, max.*40 pouches/min. Packaging materialMultilayer film Pouch width, max.200 mm Pouch length, max.320 mm Roll diameter, max.500 mm Electricals220 V, 50 Hz Power, kW3,2 Air consumption, l/min (0.6 Bar)50 Dimensions, mm.3500x800x2000 Weight, kg., max.500 Automatic machine model ASP is designed to form empty “Doypack” pouches with open top from a roll of laminate film. These pouches are further used for filling various types of products and sealing manually or on packaging machine ADM. It is also possible to make “Doypack” pouches with ZIP-LOCK. ZIP-LOCK provides multiple opening and leak-proof closing of the pouch. “Doypack” pouch is a versatile type of package. It is possible to pack a wide range of liquid, viscous, solids, powders and small sized food, as well as non-food products in this packet.

M36 - 36mm FORM E Washer Galvanised DIN 125. A wide range of Galvanised fasteners including Form E Washers Galvanised DIN 125 at cost-effective price available from A2Z Fasteners.

M30 - 30mm FORM E Washer Galvanised DIN 125. A wide range of Galvanised fasteners including Form E Washers Galvanised DIN 125 at cost-effective price available from A2Z Fasteners.

M27 - 27mm FORM E Washer Galvanised DIN 125. A wide range of Galvanised fasteners including Form E Washers Galvanised DIN 125 at cost-effective price available from A2Z Fasteners.

M24 - 24mm FORM E Washer Galvanised DIN 125. A wide range of Galvanised fasteners including Form E Washers Galvanised DIN 125 at cost-effective price available from A2Z Fasteners.

M20 - 20mm FORM E Washer Galvanised DIN 125. A wide range of Galvanised fasteners including Form E Washers Galvanised DIN 125 at cost-effective price available from A2Z Fasteners.