Battery charging - Import export

Eco-friendly torch with 2 LEDs, manually charged via the built-in dynamo. By just pulling the trigger with one hand, power is generated, providing a zero-waste source of light. In stylish black and grey colors, and including a convenient carrying strap. Presented in a kraft design box. 2 Leds. Hand Charge. Button Batteries Included

Bluetooth® 5.3 earphones. Ergonomically designed and available in a wide range of colours, with matching replacement pads. Including integrated control button on the earpiece, with matching charging base and LED charging status light. Handsfree and USB rechargeable, with Type-C cable included and 35 mAh battery in each earpiece. Matching charging base, with integrated 300 mAh battery and presented in an individual design box. Instruction manual in English and Spanish. Bluetooth Connection. Battery 35 mAh/ Charging Station 300 mAh

Earphones with Bluetooth® 5.3 connection and hands-free function. Ergonomically designed, including touch control button integrated in the earpiece, with matching charging base. Built-in 300 mAh battery and presented in an individual kraft design box. Instruction manual in English and Spanish. Bluetooth Connection. Battery 30 mAh/ Charging Station 300 mAh

The 12 V 7 Ah battery charging station from Br¼der Mannesmann is a handy vehicle starting aid with which you can optimally charge the batteries in all your vehicles and extend the service life. This car battery charger features a 300 A (peak 600 A) jump starter for passenger cars, boats, motorcycles, etc, LED work light, power supply for 12 V tools, USB connection for charging mobile phones and compressor with pressure gauge (18 bar/260 psi). It comes with valve adapters for car, motorcycle and bicycle tires, boats, balls and air mattresses. The car jump starter can be charged via a 230 V adapter or a 12 V plug. This mobile starting aid is ideal for anyone who needs to start a car or light truck in an emergency! Color: yellow and black. Housing material: plastic. Dimensions: 28.5 x 18.5 x 26 cm (L x W x H). 12 V, 7 Ah battery starting aid with compressor Starting aid with 300 A (peak 600 A). LED work lighting. USB connection for charging mobile phones, etc.

SNMP card DL802 (art. CNDL802) is designed to monitor and control the UPS over a local area network or the Internet. Monitoring, control and configuration are carried out through the builtin WEBinterface, TelNet or NMS, with the provision of automatic correct shutdown of servers and workstations connected to the UPS. The SNMP card allows you to remotely monitor the values ​​of the input and output parameters of the UPS, the battery charge level, notify the user about system events and alarms through the builtin WEB interface, via the SNMP protocol (including by sending Trap messages in the event of emergency situations) and by sending messages by email. It also provides the ability to remotely control the UPS (reboot, activation of tests, on / off sound notification)

SNMPcard DY801 (art. CNDY801) is designed to monitor the status and control of the UPS via a local area network or the Internet. Monitoring, control and configuration are carried out through the builtin WEBinterface, TelNet or NMS, with the provision of automatic correct shutdown of servers and workstations connected to the UPS. The SNMP card allows you to remotely monitor the values ​​of the input and output parameters of the UPS, the battery charge level, notify the user about system events and alarms through the builtin WEB interface, via the SNMP protocol (including by sending Trap messages in the event of emergency situations) and by sending messages by email. It also provides the ability to remotely control the UPS (reboot, activation of tests, on / off sound notification). This card model supports encryption protocols.

SNMPcard DJ801 (art. CNDJ801) is designed to monitor and control the UPS over a local area network or the Internet. Monitoring, control and configuration are carried out through the builtin WEBinterface, TelNet or NMS, with the provision of automatic correct shutdown of servers and workstations connected to the UPS. The SNMP card allows you to remotely monitor the values ​​of the input and output parameters of the UPS, the battery charge level, notify the user about system events and alarms through the builtin WEB interface, via the SNMP protocol (including by sending Trap messages in the event of emergency situations) and by sending messages by email. It also provides the ability to remotely control the UPS (reboot, activation of tests, on / off sound notification)

SNMP card DL801 (art. CNDL801) is designed to monitor and control the UPS via a local area network or the Internet. Monitoring, control and configuration are carried out through the builtin WEBinterface, TelNet or NMS, with the provision of automatic correct shutdown of servers and workstations connected to the UPS. The SNMP card allows you to remotely monitor the values ​​of the input and output parameters of the UPS, the battery charge level, notify the user about system events and alarms through the builtin WEB interface, via the SNMP protocol (including by sending Trap messages in the event of emergency situations) and by sending messages by email. It also provides the ability to remotely control the UPS (reboot, activation of tests, on / off sound notification)

SNMPcard CY504 (part no. CNCY504) is designed for monitoring and controlling the UPS via a local area network or the Internet. Monitoring, control and configuration are carried out through the builtin WEBinterface, TelNet or NMS, with the provision of automatic correct shutdown of servers and workstations connected to the UPS. The SNMP card allows you to remotely monitor the values ​​of the input and output parameters of the UPS, the battery charge level, notify the user about system events and alarms through the builtin WEB interface, via the SNMP protocol (including by sending Trap messages in the event of emergency situations) and by sending messages by email. It also provides the ability to remotely control the UPS (reboot, activation of tests, on / off sound notification). This card model supports encryption protocols.

SNMPcard DA807 (art. CNDA807) is designed to monitor the status and control of the UPS via a local area network or the Internet. Monitoring, control and configuration are carried out through the builtin WEBinterface, TelNet or NMS, with the provision of automatic correct shutdown of servers and workstations connected to the UPS. The SNMP card allows you to remotely monitor the values ​​of the input and output parameters of the UPS, the battery charge level, notify the user about system events and alarms through the builtin WEB interface, via the SNMP protocol (including by sending Trap messages in the event of emergency situations) and by sending messages by email. It also provides the ability to remotely control the UPS (reboot, activation of tests, on / off sound notification). This card model supports encryption protocols. The builtin USB port allows you to connect external optional peripherals.

External SNMPcard DY522 (art. CNDY522) is designed for monitoring and controlling the UPS via a local area network or the Internet. Monitoring, control and configuration are carried out through the builtin WEBinterface, TelNet or NMS, with the provision of automatic correct shutdown of servers and workstations connected to the UPS. The SNMP card allows you to remotely monitor the values ​​of the input and output parameters of the UPS, the battery charge level, notify the user about system events and alarms through the builtin WEB interface, via the SNMP protocol (including by sending Trap messages in the event of emergency situations) and by sending messages by email. It also provides the ability to remotely control the UPS (reboot, activation of tests, on / off sound notification). This card model supports encryption protocols. An external power supply is supplied with the card.

External SNMPcard BY506 (art. CNBY506) is designed to monitor the status and control of the UPS via a local area network or the Internet. Monitoring, control and configuration are carried out through the builtin WEBinterface, TelNet or NMS, with the provision of automatic correct shutdown of servers and workstations connected to the UPS. The SNMP card allows you to remotely monitor the values ​​of the input and output parameters of the UPS, the battery charge level, notify the user about system events and alarms through the builtin WEB interface, via the SNMP protocol (including by sending Trap messages in the event of emergency situations) and by sending messages by email. It also provides the ability to remotely control the UPS (reboot, activation of tests, on / off sound notification). This card model supports encryption protocols. Builtin additional ports allow you to connect external optional peripherals. An external power supply is supplied with the card.

SNMP card DY806 (art. CNDY806) is designed to monitor and control the UPS over a local area network or the Internet. Monitoring, control and configuration are carried out through the builtin WEBinterface, TelNet or NMS, with the provision of automatic correct shutdown of servers and workstations connected to the UPS. The SNMP card allows you to remotely monitor the values ​​of the input and output parameters of the UPS, the battery charge level, notify the user about system events and alarms through the builtin WEB interface, via the SNMP protocol (including by sending Trap messages in the event of emergency situations) and by sending messages by email. It also provides the ability to remotely control the UPS (reboot, activation of tests, on / off sound notification). This card model supports encryption protocols. Builtin MiniUSB port allows connection of external optional peripherals

SNMPcard BY505 (art. CNBY505) is designed to monitor and control the UPS over a local area network or the Internet. Monitoring, control and configuration are carried out through the builtin WEBinterface, TelNet or NMS, with the provision of automatic correct shutdown of servers and workstations connected to the UPS. The SNMP card allows you to remotely monitor the values ​​of the input and output parameters of the UPS, the battery charge level, notify the user about system events and alarms through the builtin WEB interface, via the SNMP protocol (including by sending Trap messages in the event of emergency situations) and by sending messages by email. It also provides the ability to remotely control the UPS (reboot, activation of tests, on / off sound notification). This card model supports encryption protocols. Builtin additional ports allow you to connect external optional peripherals.

SNMPcard DA806 (art. CNDA806) is designed to monitor the status and control of the UPS via a local area network or the Internet. Monitoring, control and configuration are carried out through the builtin WEBinterface, TelNet or NMS, with the provision of automatic correct shutdown of servers and workstations connected to the UPS. The SNMP card allows you to remotely monitor the values ​​of the input and output parameters of the UPS, the battery charge level, notify the user about system events and alarms through the builtin WEB interface, via the SNMP protocol (including by sending Trap messages in the event of emergency situations) and by sending messages by email. It also provides the ability to remotely control the UPS (reboot, activation of tests, on / off sound notification). This card model supports encryption protocols. The builtin MiniUSB port allows you to connect external optional peripherals

Aluminum tube 600ml Aluminum tube, turnable, with aluminum screw connections at front and back Suitable for 600ml 1K sausage packs or 310ml to 600ml cartridges Application example: suitable for auto windscreen adhesive, hybrid adhesive... Lithium-ion battery with 14.4V // 2.0AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 40 minutes Supplied in transport case Drive Extrusion power 6500N (650kg) Extrusion rate with speed control 120 – 240mm/min Automatic pressure reduction to avoid chemical materials drops out Performance: 55 cartridges of 310ml Silicone for a fully charged battery at room temperature Benefits Rack unlocking over an unlock switch Fix speed setup over an additional switch (300mm / min.) LED battery charge indicator on the battery Continuous and clean work Less fatigue while processing high viscosity adhesives Automatic pressure reduction to avoid chemical materials drops out Free of annoying air tube or electr

Aluminum tube 400ml Aluminum tube, turnable, with aluminum screw connections at front and back Suitable for 310 to 400ml 1K cartridges or sausage packs Application example: suitable for auto windscreen adhesive, hybrid adhesive ... Lithium-ion battery with 14.4V // 2.0AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 40 minutes Supplied in transport case Drive Extrusion power 6500N (650kg) Extrusion rate with speed control 120 – 240mm/min Automatic pressure reduction to avoid chemical materials drops out Performance: 55 cartridges of 310ml Silicone for a fully charged battery at room temperature Benefits Rack unlocking over an unlock switch Fix speed setup over an additional switch (300mm / min.) LED battery charge indicator on the battery Continuous and clean work Less fatigue while processing high viscosity adhesives Automatic pressure reduction to avoid chemical materials drops out Free of annoying air tube or electric cabl

Cartridge cradle 9545 Suitable for 1400ml 2:1 side-by-side cartridges Application example: Using 1400ml 2:1 side-by-side cartridges, e.g. composite mortar for anchor securing. Lithium-ion battery pack with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charge time approx. 30 minutes Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 20 1400ml side-by-side cartridges per battery charge. Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when working with high-viscosity products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPD-9545-10.8V Li-ion 1 cartridge press for 1400ml 2:1 side-by-side cartridges 1 battery pack 10.8V Li-ion 1 rapid charger with charge indicator and

Aluminum tube 600ml Aluminum tube, turnable, with aluminum screw connections at front and back Suitable for 600ml 1K sausage packs or 310ml to 600ml cartridges Application example: from kitchen and bathroom tile joints to auto windscreen adhesive Lithium-ion battery pack with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion power 5000N (500kg) Extrusion rate with speed control 50 – 330mm/min Performance: 45 cartridges of 310ml Silicone for a fully charged battery at room temperature Benefits Continuous and clean work. Less fatigue while processing high viscosity adhesives. Automatic pressure reduction to avoid chemical drops. Free of annoying air tube or electric cable on working place. Charger: IP30 // Class 2 Input: 100 – 240 V ~ 50/60Hz 30W Output: 10.8V A 2A Security: CE and GS checked Packaging DynamicMax Type HPS-6T-10.8V Li-Ion 1 pc. Li-Ion battery pack 10

Aluminum tube 400ml Aluminum tube, turnable, with plastic screw connections at front and back Suitable for 310 or 400ml 1K cartridges or sausage packs Application example: kitchen and bathroom tile joints, acrylic joint adhesive… Lithium-ion battery pack with 3.6V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion power 3000N (300kg) Extrusion rate with speed control 50 – 330mm/min Automatic pressure reduction to avoid chemical materials drops out. Performance: 30 cartridges of 310ml Silicone for a fully charged battery at room temperature. Benefits Continuous and clean work. Less fatigue while processing high viscosity adhesives. Automatic pressure reduction to avoid chemical materials drops out. Free of annoying air tube or electric cable on working place. Charger: IP30 // Class 2 Input: 100 – 240 V ~ 50/60Hz 30W Output: 3.6V A 2A CE checked and GS proved Packaging Dyn

Aluminum tube 400ml Aluminum tube, turnable, with aluminum screw connections at front and back Suitable for 310 to 400ml 1K cartridges or sausage packs Application example: from kitchen and bathroom tile joints to auto windscreen adhesive Lithium-ion battery pack with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion power 5000N (500kg) Extrusion rate with speed control 50 – 330mm/min Automatic pressure reduction to avoid chemical materials drops out. Performance: 45 cartridges of 310ml Silicone for a fully charged battery at room temperature. Benefits Continuous and clean work. Less fatigue while processing high viscosity adhesives. Automatic pressure reduction to avoid chemical materials drops out. Free of annoying air tube or electric cable on working place Charger: IP30 // Class 2 Input: 100 – 240 V ~ 50/60Hz 30W Output: 10.8V A 2A Security: CE and GS checked

Cartridge cradle with position indicator (consumption indicator) Suitable for 310ml coaxial cartridges as well as 310ml 1K cartridges Application example: composite mortar for fixing purposes, silicon cartridges or sealants Lithium-ion battery pack with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Transport case Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 38 310ml 2K composite mortar cartridges per battery charge. Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when working with high-viscosity products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPS-3 CS-10.8V Li-Ion with position indicator 1 cartridge press for 310ml coax

Cartridge cradle, suitable for 310ml 1:1 coaxial cartridges as well as 310ml 1K cartridges Application example: Using 310ml 1:1 coaxial cartridges of e.g. fire-extinguishing foam. Lithium-ion battery pack with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 38 310ml 2K composite mortar cartridges per battery charge. Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when using high-viscosity products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPS-3C1-10.8V Li-ion 1 cartridge press for 310ml 1:1 coaxial cartridges 1 battery pack 10.8V Li-ion 1 rapid charger w

Cartridge cradle 7575 Suitable for 1500ml 1:1 side-by-side cartridges Application example: Using 1500ml 1:1 side-by-side cartridges, e.g. composite mortar for anchor securing. Lithium-ion battery pack with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charge time approx. 30 minutes Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 20 1500ml side-by-side cartridges per battery charge. Benefits Clean, even working Less fatigue when working with high-viscosity products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPD-7575-10.8V Li-Ion 1 cartridge press for 1500ml 1:1 side-by-side cartridges 1 battery pack 10.8V Li-ion 1 rapid charger with charge indicator and Euro plug Additional battery pack available on request Weight

Cartridge cradle 7530 Suitable for 1050ml 3:1 side-by-side cartridges Application example: Using 1050ml 3:1 side-by-side cartridges, e.g. composite mortar for anchor securing. Lithium-ion battery with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 20 1050ml side-by-side cartridges per battery charge. Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when working with high-viscosity products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPD-7530-10.8V Li-Ion 1 cartridge press for 1050ml 3:1 side-by-side cartridges 1 battery pack 10.8V Li-ion 1 rapid charger wi

Cartridge cradle 7515 Suitable for 900ml 5:1 side-by-side cartridges Application example: Using 900ml 5:1 side-by-side cartridges, e.g. composite mortar for anchor securing. Lithium-ion battery with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 20 900ml side-by-side cartridges per battery charge. Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when working with high-viscosity products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPD-7515-10.8V Li-Ion 1 cartridge press for 900ml 5:1 side-by-side cartridges 1 battery pack 10.8V Li-ion 1 rapid charger with c

Cartridge cradle 7508 Suitable for 825ml 10:1 side-by-side cartridges Application example: Using 825ml 10:1 side-by-side cartridges, e.g. composite mortar for anchor securing. Lithium-ion battery with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 20 825ml side-by-side cartridges per battery charge. Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when working with high-viscosity products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPD-7508-10.8V Li-Ion 1 cartridge press for 825ml 10:1 side-by-side cartridges 1 battery pack 10.8V Li-ion 1 rapid charger wit

Cartridge cradle 6030 Suitable for 900ml 2:1 side-by-side cartridges Application example: Using 900ml 2:1 side-by-side cartridges, e.g. composite mortar for anchor securing. Lithium-ion battery with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 20 900ml side-by-side cartridges per battery charge. Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when working with high-viscosity products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPD-6030-10.8V Li-Ion 1 cartridge press for 900ml 2:1 coaxial cartridges 1 battery pack 10.8V Li-ion 1 rapid charger with charge

Cartridge cradle 4515 Suitable for 385ml and 585ml 3:1 side-by-side cartridges Application example: Using 385ml and 585ml 3:1 side-by-side cartridges, e.g. composite mortar for anchor securing. Lithium-ion battery pack with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 20 585ml side-by-side cartridges per battery charge. Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when using high-viscosity products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPD-4515-10.8V Li-ion 1 cartridge press for 385ml and 585ml 3:1 side-by-side cartridges 1 battery pack 10.8V L