Battery chargers - Import export

External auxiliary battery of 4,000 mAh made of aluminium. With USB output and, and Type C input and output. LED charge status indicators and charging cable included. Available in stylish colours and presented in an individual kraft design box, with instructions manualin English and Spanish. Micro USB input: 5V DC 1ª USB output: 5V DC 1A The capacities shown in all our external auxiliary batteries are real, all of them incorporating non-recycled, grade A batteries, with a service life of at least 500 charging cycles, and complying with CE regulations. In addition, they are manufactured according RoHS standards, and in compliance with the following safety requirements: Power bank overcharge protection system. Complete discharge protection system, which increases the durability of the power bank. Blocking system to prevent short circuits. Constant charging transfer system, in accordance with the capacity of the target device.

External auxiliary battery with a high charging capacity - 10,000 mAh - and a durable aluminium body. With dual USB and Type C outputs for charging three devices simultaneously and 1 Type C input connection. Charging status LEDs, extra slim design and large branding surface, especially recommended for laser engraving. Presented in an attractive kraft design box. Instructions manualin English and Spanish available. The capacities shown in all our external auxiliary batteries are real, all of them incorporating non-recycled, grade A batteries, with a service life of at least 500 charging cycles, and complying with CE regulations. In addition, they are manufactured according RoHS standards, and in compliance with the following safety requirements: Power bank overcharge protection system. Complete discharge protection system, which increases the durability of the power bank. Blocking system to prevent short circuits.

DIGITAL ADVANTAGE Digital technology has the advantage of delivering extended test range, ultimate stability and high power in a compact housing. Each of the four channels can be programmed to 10A charge and discharge. Power handling is 100W per channel on charge and 80W on discharge, or 400W on charge and 320W on discharge on all four channels. The Cadex C8000 is more than a programmable power supply and load bank; the instrument provides intelligence to assist in battery testing. Protected charge and discharge algorithms with redundant safety features identify a faulty battery and safely terminate the service if so needed. The system can be overridden for destructive tests. I/O PORTS PROVIDE INDEPENDENT SERVICE Each channel features a Battery Port and I/O Port for individual programming. The system includes:

The Cadex C7400ER is the most powerful of the C7000 Series battery analyzers. Six amps per station, service of 36 volt batteries and 170 watts of continuous power satisfies most service requirements.

The Cadex C7x00 Series battery analyzers offer a platform that fulfills virtually all battery testing and conditioning needs. With features such as QuickSort®, that checks lithium-ion batteries in 30 seconds, and Boost that revives dead packs, the C7x00 truly masters battery testing. Slide a battery into one of our 1,500 custom Battery Adapters, or use a Universal Adapter and you will discover why the C7x00 has become the world's leading battery analyzer.

Wireless, multifunctional and multi-output travel adapter with integrated powerbank of 10,000 mAh charging capacity. Elegant white design with large branding surface. Wireless charging function with magsafe technology, with dual Type C input/output, and USB outputs. Two integrated output cables with Type C and 2-in-1 connectors (Micro USB and Lightning). Simultaneous use for all functions, with wall plug adapters for USA, Europe, Asia, UK and Australia. Presented in an attractive kraft design box. Instruction manual available in English and Spanish. The capacities shown in all our external auxiliary batteries are real, all of them incorporating non-recycled, grade A batteries, with a service life of at least 500 charging cycles, and complying with CE regulations. In addition, they are manufactured according RoHS standards, and in compliance with the following safety requirements: Power bank overcharge protection system.

The 12 V 7 Ah battery charging station from Br¼der Mannesmann is a handy vehicle starting aid with which you can optimally charge the batteries in all your vehicles and extend the service life. This car battery charger features a 300 A (peak 600 A) jump starter for passenger cars, boats, motorcycles, etc, LED work light, power supply for 12 V tools, USB connection for charging mobile phones and compressor with pressure gauge (18 bar/260 psi). It comes with valve adapters for car, motorcycle and bicycle tires, boats, balls and air mattresses. The car jump starter can be charged via a 230 V adapter or a 12 V plug. This mobile starting aid is ideal for anyone who needs to start a car or light truck in an emergency! Color: yellow and black. Housing material: plastic. Dimensions: 28.5 x 18.5 x 26 cm (L x W x H). 12 V, 7 Ah battery starting aid with compressor Starting aid with 300 A (peak 600 A). LED work lighting. USB connection for charging mobile phones, etc.

UPS with single phase input and single phase output Double conversion (online topology) Lithium batteries with builtin BMS system Battery life up to 15 years The number of chargedischarge cycles of a lithium battery at least 2000 Powerful battery charger Remote administration DGS connection possibility Intelligent battery management LCD display with setting function Parallel operation Pure sine wave output

Steel sheet cradle with position rod 310ml coaxial cartridges Drive Extrusion power 5000N (500kg) Extrusion rate with speed control 120 – 240mm/min Benefits Continuous and clean work Less fatigue while processing high viscosity adhesives. Automatic pressure reduction to avoid chemical drops. Free of annoying air tube or electric cable on working place. Charger: IP30 // Class 2 Input: AC 230V ~ 50Hz 55W Output: DC 12 … 2.45A 28.8VA Security: CE checked Packaging Cordless caulking gun HPS-3CS-12V NI-MH NI-MH battery pack 12 / 2.0AH Battery charger with Euro plug Blow mould case Back up battery on request

Aluminum tube 400ml Aluminum tube, turnable, with plastic screw connections at front and back Suitable for 310 or 400ml 1K cartridges or sausage packs Application example: kitchen and bathroom tile joints, acrylic joint adhesive… Lithium-ion battery pack with 3.6V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion power 3000N (300kg) Extrusion rate with speed control 50 – 330mm/min Automatic pressure reduction to avoid chemical materials drops out. Performance: 30 cartridges of 310ml Silicone for a fully charged battery at room temperature. Benefits Continuous and clean work. Less fatigue while processing high viscosity adhesives. Automatic pressure reduction to avoid chemical materials drops out. Free of annoying air tube or electric cable on working place. Charger: IP30 // Class 2 Input: 100 – 240 V ~ 50/60Hz 30W Output: 3.6V A 2A CE checked and GS proved Packaging Dyn

Aluminum tube 400ml Aluminum tube, turnable, with aluminum screw connections at front and back Suitable for 310 to 400ml 1K cartridges or sausage packs Application example: suitable for auto windscreen adhesive, hybrid adhesive ... Lithium-ion battery with 14.4V // 2.0AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 40 minutes Supplied in transport case Drive Extrusion power 6500N (650kg) Extrusion rate with speed control 120 – 240mm/min Automatic pressure reduction to avoid chemical materials drops out Performance: 55 cartridges of 310ml Silicone for a fully charged battery at room temperature Benefits Rack unlocking over an unlock switch Fix speed setup over an additional switch (300mm / min.) LED battery charge indicator on the battery Continuous and clean work Less fatigue while processing high viscosity adhesives Automatic pressure reduction to avoid chemical materials drops out Free of annoying air tube or electric cabl

Aluminum tube 400ml Aluminum tube, turnable, with aluminum screw connections at front and back Suitable for 310 to 400ml 1K cartridges or sausage packs Application example: from kitchen and bathroom tile joints to auto windscreen adhesive Lithium-ion battery pack with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion power 5000N (500kg) Extrusion rate with speed control 50 – 330mm/min Automatic pressure reduction to avoid chemical materials drops out. Performance: 45 cartridges of 310ml Silicone for a fully charged battery at room temperature. Benefits Continuous and clean work. Less fatigue while processing high viscosity adhesives. Automatic pressure reduction to avoid chemical materials drops out. Free of annoying air tube or electric cable on working place Charger: IP30 // Class 2 Input: 100 – 240 V ~ 50/60Hz 30W Output: 10.8V A 2A Security: CE and GS checked

Cartridge cradle with position indicator (consumption indicator) Suitable for 310ml coaxial cartridges as well as 310ml 1K cartridges Application example: composite mortar for fixing purposes, silicon cartridges or sealants Lithium-ion battery pack with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Transport case Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 38 310ml 2K composite mortar cartridges per battery charge. Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when working with high-viscosity products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPS-3 CS-10.8V Li-Ion with position indicator 1 cartridge press for 310ml coax

Cartridge cradle 7508 Suitable for 825ml 10:1 side-by-side cartridges Application example: Using 825ml 10:1 side-by-side cartridges, e.g. composite mortar for anchor securing. Lithium-ion battery pack, 14.4V // 3.0AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 40 minutes Supplied in transport case Drive Extrusion force up to 6500N (650kg) Extrusion rate adjustable from 120 to 240mm/min Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when using highly viscous products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPD-7508-14.4V Li-ion 1 cartridge press for 825ml 10:1 side-by-side cartridges 1 14.4V Li-ion battery pack 1 rapid charger with charge indicator and Euro plug 1 plastic case Additional battery pack available on re

Cradle 10535 Steel cradle, open Suitable for 1400ml (3:1) 2K side-by-side cartridges Application example: auto windscreen adhesive, hybrid adhesive... Lithium-ion battery pack with 14.4V // 3.0AH with LED charge indicator Rapid charger with battery charge and status indicator, charge time approx. 40 minutes Drive Extrusion force up to 6500N (650kg) Extrusion rate adjustable from 120 to 240mm/min Automatic pressure reduction prevents material from dripping Benefits LED charge indicator on the battery pack Clean, even working Less fatigue, particularly when working with high-viscosity products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: 100 – 240 V ~ 50/60Hz 90W Output: 14.4V A 3.4A Safety: CE and GS tested Packaging PowerMax type HPD-10535-14.4V / Li-Ion 1 battery pack 14.4V // 3.0AH // Li-ion (lithium-ion) 1 rapid charger with charge indicator and Euro plug Additional battery pack available on request Weight: complete set in transport case

Aluminum tube 600ml Aluminum tube, turnable, with aluminum screw connections at front and back Suitable for 600ml 1K sausage packs or 310ml to 600ml cartridges Application example: suitable for auto windscreen adhesive, hybrid adhesive... Lithium-ion battery with 14.4V // 2.0AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 40 minutes Supplied in transport case Drive Extrusion power 6500N (650kg) Extrusion rate with speed control 120 – 240mm/min Automatic pressure reduction to avoid chemical materials drops out Performance: 55 cartridges of 310ml Silicone for a fully charged battery at room temperature Benefits Rack unlocking over an unlock switch Fix speed setup over an additional switch (300mm / min.) LED battery charge indicator on the battery Continuous and clean work Less fatigue while processing high viscosity adhesives Automatic pressure reduction to avoid chemical materials drops out Free of annoying air tube or electr

EagleAttack of Scott is durable, light thermal imaging camera. Easy to use and became indispensable for fire brigade, police as well as in security sectors. The sensors functionates with a definition of 160x120 pixels, frame rate of 60Hz and a dynamic blend circuit, that reacts up to 600°C. Technology of EagleAttack uses a vanadium oxide- microbolometer for clearer image display and it allows taking pictures clearly identifiable and extraordinary differentiated with the camera. EagleAttack is provided with NiMH-battery, operating time of 2 hours. AA-batteries can be used as well. Battery is inserted to table charger of Scott Eagle X for charging. Optionally, battery charger (TCS) is available whereby the camera can be fixed to. The battery is charging while situated in handgrip of camera. EagleAttack can be fixed to shoulder strap and can be carried along in mode of “ready to shoot”. Decide to easy, reliable and affordable thermal imaging technology! Prices on request!