Respiratory and ventilation equipment - Import export

We develop and manufacture blower components such as fans, motors, duct guides, electronics and housings and, if desired, integrate them into assemblies and devices. In addition, we develop entire blowers as well as the required equipment. Furthermore, we are your contact for fan optimisation with regard to improved volume flow, more efficient volume pressure and noise reduction.

High-reach diffusers with 3-way air outlet. - Admissible flows from 5,500 m3/h to 63,000 m3/h. - Made of galvanized steel painted in oven-dried polyester powder paint in RAL 7035 gray. - Simple deflection grilles with slats made of polyamide. - Opening regulation from 0º to 90º. - Possibility of supply with double deflection grids. - 30mm METU clamping frame.

High-reach diffusers with 6-way air outlet. - Admissible flows from 5,500 m3/h to 63,000 m3/h. - Made of galvanized steel painted in oven-dried polyester powder paint in RAL 7035 gray. - Simple deflection grilles with slats made of polyamide. - Opening regulation from 0º to 90º. - Possibility of supply with double deflection grids. - 30mm METU clamping frame.

The insulated manifold box is used for mechanical ventilation systems with heat recovery (MVHR). MVHR manifolds do not need to be insulated onsite thanks to the insulating properties of EPP. Manifold boxes are designed for distribution of 75mm semi-rigid ducting around. The number of connectors varies depending on the user's specifications: 6-13 connection spigots.

Greenhouse Ventilation Switch Motor

Thermal aerator for windows in translucent thermoplastic material with manual opening and closure system, with anti-insect net. It can be installed both on single and double glazing by simply turning the ring.

tubolars ,roof top & wall types

Centrifugal wall-mounted exhaust fan. For holes of ø 100 mm. By removing the rubber ring the fan becomes suitable for holes of ø 80 mm or ø 90 mm. Supplied with dowels for wall installation. Brushless engine 70% energy saving. Threefold life. Anti-static finish that provides protection from dust and dirt. On request it is possible to have 12 Volt SELV exhaust fan that can be installed in ZONE 1

Adapts to high load and is a robust.product. Standard galvanized coating. Code: GMAXK Dimensions: 37x19x27 mm Sheet Thickness: 2 mm Ø: 7 mm Weight: 24.5 gr Package: 500 Pieces Code: GMINK Dimensions: 31x16x25 mm Sheet Thickness: 2 mm Ø: 7 mm Weight: 19.5 gr Package: 500 Pieces

Serie Cappa Aspirante- Kitchen Hood with or without light. The version with light have 6 LED of a cool White color, light consume 12 V - 0.7W. In both version filter is detachable and washable. Serie AO- Porthole air pocket in thermoplastic polipropilen with snap-on opening and closing. Suitable for holes of 165/185 diameter. With standard ferrule for thickness of up to 45 mm. On request high ferrule for tickness up to 55/60 mm. Serie S11- axial exhaust fan in thermoplastic material. Consume 12 V. Serie S72-axial exhaust fan in thermoplastic material . Consume 12V. CAMINO PER SCARICO- exhaust gas stack in Polypropylen and Pocan •MOPLEN: to discharge exhalations; •PARAPIOGGIA: to discharge exhalations with antisplash guard in the upper part; •POCAN: to discharge heating (heat resistant).

Serie LEVANTE WALL EXHAUST AXIAL FANS Wall-mounted exhaust fan with axial aspiration. Supplied with dowels for wall installation. Anti-static finish that provides protection from dust and dirt. The kit is available for installation on windows.

DiAm line is ideal to intake or exhaust air through circular ducting in: public locals, offices, shops, bars, pools, laboratories, kitchens, toilets, workshops, restaurants etc. its compact steel structure, external rotor motor and centrifugal backward bladed impeller ensure: • easy installation; • flexible working by adjusting the rpm; • high efficiency; • sturdiness and reliability. rANGE This line consists of 6 models with diameters from 100 up to 315mm. cONSTrUcTiON • casing in weather proof steel sheet. • Steel sheet motor supports with airflow straighteners. • External rotor motor iP44 protection iSO B, speed adjustable by electronic speed regulator. • High efficiency backward blade impeller. • Terminal box in techno-polymer. TEcHNicAlSPEciFicATiONS • conveyed air: clean. • Temperature air: -20°c/ +50°c. • Voltage and frequency: mono phase 230V-50 Hz.

Serie Etesi- wall exhaust fan. Built in axial fan with expulsion.

Dimensions: Material Type (HRP, DKP), Coating Type: Electro Galvanized, Material Thickness: 2 mm Code: KRSK20 Type: 1 WxW1: 66 mm H: 15 mm Ø: RxR1xR2: 9x6x6 mm Code: KRSK25 Type: 2 WxW1: 85 mm H: 20 mm Ø: RxR1xR2: 9x6x6 mm Code: KRSK30 Type: 3 WxW1: 105 mm H: 24 mm Ø: RxR1xR2: 9x6x6 mm Code: KRSK35 Type: 4 WxW1: 106 mm H: 29 mm Ø: RxR1xR2: 10x6x7 mm

Wall-mounted exhaust fan with axial aspiration. Supplied with dowels for wall installation. The kit is available for installation on windows AUTOMATIC OPENING/CLOSURE IN MYLAR

Technical Information and Dimensions: Material: Steel, Coating: Electrogalvanized Code: KGJN061000 Rod Size: M.6 x 1.000 mm Design Load: 1,10 kN Code: KGJN062000 Rod Size: M.6 x 2.000 mm Design Load: 1,10 kN Code: KGJN081000 Rod Size: M.8 x 1.000 mm Design Load: 2.25 kN Code: KGJN082000 Rod Size: M.8 x 2.000 mm Design Load: 2.25 kN Code: KGJN101000 Rod Size: M.10 x 1.000 mm Design Load: 3.29 kN Code: KGJN102000 Rod Size: M.10 x 2.000 mm Design Load: 3.29 kN Code: KGJN121000 Rod Size: M.12 x 1.000 mm Design Load: 4.81 kN Code: KGJN122000 Rod Size: M.12 x 2.000 mm Design Load: 4.81 kN Code: KGJN141000 Rod Size: M.14 x 1.000 mm Design Load: 6.84 kN Code: KGJN142000 Rod Size: M.14 x 2.000 mm Design Load: 6.84 kN Code: KGJN161000 Rod Size: M.16 x 1.000 mm Design Load: 9.18 kN Code: KGJN162000 Rod Size: M.16 x 2.000 mm Design Load: 9.18 kN Code: KGJN181000 Rod Size: M.18 x 1.000 mm Design Load: 11.52 kN Code: KGJN182000 Rod Size: M.18 x 2.000 mm Design Load: 11.52 kN

Serie LPE HELICAL FANS FOR WALL The LPE serie’s fans, present constructive characteristics that allow both the utilization in the industrial applications and the installations in the tertiary environments (workshops, stores, breedings, glasshouses) where there is the real necessity of the employment of a fan with easy installation, low consumptions, and reduced noise pressure levels.

Multiple shapes and forums, insulated or painted.

Electrostatic powder coating is a solvent-free surface coating method. The coating material is very fine powder paint particles that make up the top coat layer. Powder paint is thrown in the paint booth by means of special spray guns. Electrostatically charged powder paint particles while passing through the gun adhere to the material to be painted in the cabinet and the coating process is realized. The result is a very durable, economical, environmentally friendly, wide color range and glossy surface coating. Solvent-free, surface quality, durability, paint recovery system, economy and environmental sensitivity make electrostatic powder coating a more attractive alternative to traditional painting processes. Dyeing can be done according to the desired Ral code.

DIRECT DRIVEN CENTRIFUGAL FANS EMPLOYMENT •Single inlet centrifugal fans. •Suitable for clean air and temperatures up to 60°C on machines and process-units. •10 models with air flow up to 4.000 m3/h and stastic pressure up to 180 mm H2O (1.800 Pa). •Steel housing painted impeller with forward curved blades wire mesh guard on inlet, outlet flange. • Enclosed and ventilated motor, three phase or single phase, IP55 protection, class F. BY REQUEST •Inlet spigot. •Model LCB AT. •Construction for air temperature up to 200° C.