Resin filled - Import export

E57 are designed to fit directly to the terminals of your IGBT. Our range comprises standard as well as custom-tailored solutions which can be adapted to the specific geometrical and electrical requirements of your application environment. Connection is made through low-inductance copper bars which may vary in number, size and position according to your specifications. The UL:V0 plastic case houses compact and stable cylindrical windings, connected in parallel for maximum current strength and lowest possible selfinductance; it is filled with polyurethane resin, covered by a layer of UL94:V0 compliant resin protecting the winding package from humidity. Our highly reliable SecuMet™ film guarantees secure self-healing properties even under the most demanding operating conditions. Some of our E57 capacitors can be operated at ambient temperatures up to 105°C and are therefore suitable for usage in automotive and other critical applications

E53 and E55 capacitors have a particularly low series resistance and high pulse strength. Using sophisticated metallizing patterns, our SINECUT slitting technology and clever winding geometries, they are especially suited for the damping of GTO thyristors and low-inductance buffer circuits with high rms currents. Along with their very good ratio of capacitance to volume, these components do also have very good self-healing characteristics without loss of capacitance. Their very low self-inductance makes them suitable for use in high-current applications with medium frequencies. The capacitors of the E53 product family are housed in flame-retardant plastic cans (V0) and filled with solid resin. Special care has been taken both in terms of design and conservative electrical rating to ensure reliable operation even under tough environmental conditions. Connection is usually made through robust axial terminals with internal thread.

In power electronics in general, and especially in low inductance buffer circuits with higher voltages as well as in discharge circuits, the call for capacitors with low inductance tends to pose problems: traditional high voltage capacitors are filled with oil, and the generous bushings required for clearance and creepage as well as internal safety mechanisms add substantially to the self-inductance of the capacitor. Based on decades of proprietary experience in metallizing capacitor films, ELECTRONICON has created a range of high voltage capacitors in self-healing technology, using the opportunities of special metallizing patterns. Despite the high voltage rating, our E51 range is manufactured in dry technology and without expensive bushings. Inside the can made of self-extinguishing plastic, the capacitor element is enclosed in solid resin (PUR). Connection is made through robust flat terminals with internal thread.

Thanks to the special kind of films and coating patterns used in our E56/E59-capacitors, clever winding geometries and refined internal construction, they unite large capacitance, very small self-inductance and high surge current sustaining capability (up to 700kA) as well as the possibility of high rms currents (up to 750A). Instead of flat pack windings, our capacitance is formed by compact cylindrical windings, avoiding the mechanical stress and instabilities at the edges of flat packs. Special terminals allow for additional reduction of the self-inductance. At the same time, they are extremely overvoltage-proof. They are especially suited for buffer storage circuits of converters, filter circuits and such like. The capacitors are housed in aluminium or steel cases and filled with solid resin which makes them absolutely dry and leakage-proof. Their shape and dimensions can be adapted to the individual requirements of our customers.

The traditional ALLFILM system of conventional medium and high voltage capacitors consists of aluminium foil and polypropylene, immersed completely in synthetic, flammable oil. Breakdowns in this kind of dielectric tend to result in permanent short circuits which take out the entire capacitor element, change the voltage conditions inside the capacitor and initiate a chain reaction of further failures of capacitor elements which will end up in the loss of the entire capacitor. In three-phase capacitors, this process is usually accompanied by the occurrence of phase asymmetries which may cause damage and catastrophic failure. In our MSD™ medium voltage capacitors, we are using the metallised polypropylene so well known from LV power factor correction. Instead of flat pack windings, our capacitance is formed by compact cylindrical windings, avoiding the mechanical stress at the edges of the ALLFILM flat packs.

Together with the Fachhochschule Münster – University of Applied Sciences we are working on ALWA PERM (patent No. 2583995). This is a metal-filled casting resin for producing a porous, resin-bound mould. These materials are applicable in the areas of thermoforming, the ceramic industry, intake moulds and devices, pneumatic cushioning, the filter industry, etc. ALWA PERM allows a castable production of porous metallic materials with a binder for the first time. The system offers a highly accurate mould surface reproduction. The profile characteristics goes far beyond the current state of the art. NO MORE DRILLING OF VACUUM HOLES! NO DAMAGE OF THE MOULD SURFACE DUE TO DRILLING HOLES

uncalcined muscovite mica paper impregnated with a thermosetting epoxy resin to fill cavities and as a filler in coils and bars of high voltage machines.

The ViscoMT-XS hobbock emptying system offers a modern way of emptying containers.The following advantages result from the use of eccentric screw pumps for the removal of the medium: - container sizes from approx. 5 l to 50 l - viscosities of approx. 80,000 - 2,000,000 mPas - very low shear stress of the medium - very low pressure load of the medium (max. 18 bar) - Removal of media loaded with fillers - no backflow within the sampling pump - electrical control of the pump with pressure control - valve-free pump system - no material pressure reducer necessary due to electronic pressure adjustment - very good residual emptying (less than 1% residue) - electronic "empty" and "almost empty" message Application: - Removal of media directly from the delivery container, e.g. silicones, adhesives, resins, greases, colour pastes, metal-filled pastes (Cu and Ni solder pastes, Al and Ag pastes) - supply of media to dispensers - direct dosing as pulsation-free flow rate

The ViscoMT-XL drum emptying system offers a modern way of emptying containers. The following advantages result from the use of eccentric screw pumps for the removal of the medium: - container sizes from 50 l - viscosities of approx. 80,000 - 2,000,000 mPas - Bridge frame can be driven underneath with drums on pallets - very low shear stress of the medium - very low pressure load of the medium (max. 18 bar) - Removal of media loaded with fillers - no backflow within the sampling pump - electrical control of the pump with pressure control - valve-free pump system - no material pressure reducer necessary due to electronic pressure adjustment - very good residual emptying (less than 1% residue) - electronic "empty" and "almost empty" message Application: - Removal of media directly from the delivery container, e.g. silicones, adhesives, resins, greases, colour pastes, metal-filled pastes (Cu and Ni solder pastes, Al and Ag pastes) - supply of media to dispensers

The ViscoMT-D bin emptying system offers a modern way of emptying small containers and bins cleanly. The use of our dispenser series for the removal of the medium offers the following advantages: - container sizes from approx. 100 ml to 5 l - viscosities of approx. 80,000 - 1,000,000 mPas - very low shear stress of the medium - very low pressure load of the medium (max. 18 bar) - Removal of filler-loaded material - no backflow within the withdrawal pump - electrical control of the pump with pressure control - direct dosing from the container possible - valve-free pump system - no material pressure reducer necessary due to electronic pressure adjustment - very good residual emptying (less than 1% residue) - electronic "empty" and "almost empty" message Application: Removal of materials directly from the delivery container, e.g. silicones, adhesives, resins, fats, colour pastes, metal-filled pastes (Cu and Ni solder pastes, Al and Ag pastes)

The cartridge emptying ViscoMT-C offers the possibility to empty 180 ml cartridges, 310 ml Euro cartridges and 600 ml or 950 ml cartridges in industrial use. Your advantages: - Plunger without direct air supply - Supply of media to the dispenser(s) - Venting option after cartridge change - electrical "empty" and "almost empty" message Controls: - Pressure sensor for inlet pressure control - Pneumatic pressure reducer for pre-pressure adjustment Application: - for low-viscosity media up to viscous media - Media examples: Silicones, adhesives, resins, greases, color pastes, metal-filled pastes Necessary and optional components: Dispenser suitable for dosing (separate article)

The ViscoTreat-R preparation and feeding system ensures an even and reliable product supply. At the same time, the medium is optimally prepared for the production process by stirring and circulating. The use of the VRP dispenser series for the further transport of the medium offers the following advantages: optimal processing of viscosities up to 50,000 mPas very low shear stress of the medium very low pressure load of the medium (max. 18 bar) - Removal of media loaded with fillers - no backflow within the sampling pump - electrical control of the pump with pressure control - no air supply necessary - valve-free pump system - no material pressure reducer necessary due to electronic pressure adjustment - Stator material is adapted to the medium to be pumped Application: - Feeding and processing of medium to highly sensitive media, e.g.: Silicones, adhesives, resins, greases, colour pastes, metal-filled pastes

ALWA UP GELCOAT is an aluminium filled polyester surface resin with a temperature resistance of 110 °C. Pot life is approx. 20 – 30 min. at room temperature, when using 1 – 2 % hardener (art. no. 3150001). The top layer can be polished to high gloss.

AGRANA’s starch products are used in the textile industry as sizing agents, adhesives for textile webs, textile print thickeners and in digital printing applications. They are ideally compatible with additional finishing agents such as optical bleaching agents, filling agents, synthetic resins and dispersion agents.

The ViscoMT-L 3 / 18 barrel emptying system offers a modern way of emptying containers.The connection with the ViscoTec VMP dispenser series for the removal of the medium offers the following advantages: - container sizes from approx. 50 l to 300 l - viscosities of approx. 80,000 - 2,000,000 mPas - very low shear stress of the medium - very low pressure load of the medium (max. 18 bar) - removal of materials loaded with fillers - no backflow within the sampling pump - electrical control of the pump with pressure control - valve-free pump system - no material pressure reducer necessary due to electronic pressure adjustment - very good residual emptying (less than 1% residue) - electronic "empty" and "almost empty" message Application: Removal of materials directly from the delivery container, e.g. silicones, adhesives, resins, greases, colour pastes, metal-filled pastes (Cu and Ni solder pastes, Al and Ag pastes) - supply of media to dispensers

M720 chopped strand mat represents a compelling solution for deep draw and complex molding processes with highly filled resin systems. EASY HANDLING AND MOLDABILITY Optimized bonding and chop length mix bring high conformability and easy hand tearing for tailored shapes. PROCESS EFFICIENCY Fast wetting and quick air release maximize molding productivity. Excellent weight uniformity helps laminate consistent thickness. ENHANCED SERVICE LIFE Compared to standard Eglass, Advantex® glass helps with enhanced service life in applications facing corrosion. M720 mat is designed for hand layup process with polyester, vinyl ester resin systems.

The vetronites may contain epoxy, polyester, melamine and silicone resins with different thermal class depending on the model chosen. They have excellent mechanical and dielectric characteristics and are suitable for use in many sectors and are the excellence for the electromechanical sector. It should be noted that FR4, GPO3 and FR5 glass elements are self-extinguishing according to the UL 94 V0 standard. The GPO3 and FR5 material are also non-marking and halogen-free. The GPO3 material is a layered insulation based on glass mat and filled polyester resin and is used for machined and sheared pieces. It has good mechanical properties and is suitable for blanking up to 6mm thick. It has good dielectric properties. The FR4, G11 and FR5 laminates are layered with a glass fabric and epoxy resin base. They have different thermal classes. LG11 material exists in two versions: - Insulation class F (155 ° C), code LG11 - Insulation class H (180 ° C), code LG11H

Discover the excellence of our HM 7571 EVA Hotmelt, meticulously crafted for superior wood applications. Formulated with precision, this thermoplastic hotmelt adhesive boasts a composition rich in EVA and synthetic resin, free from any additive filling material. Renowned for its remarkable flexibility, our hotmelt adhesive stands as an optimal selection, particularly tailored for a wide array of applications within the wood industry. Whether it's solid wood, ABS, PVC, MDF, SuntaLAM, or melamine edge bands, our product ensures steadfast performance, delivering reliability and quality you can trust. Elevate your woodworking projects with our HM 7571 EVA Hotmelt, where excellence meets innovation.

The custom-tailored capacitors of our E70 series are mainly applied for power factor correction or as resonance capacitors in induction furnaces that are operated at mains frequency (50/60Hz). The E70 are made alternatively in two designs: Inside the steel case, there is a large number of individual self-healing capacitors, each one of them protected by its own break-action mechanism. In the event of a failure, the affected element is disconnected separately while the capacitor as a whole continues to function with slightly decreased total capacitance. Windings assembled inside a hermetically sealed metal case, filled with solid resin, and protected by a pressure sensor similar to the capacitors of our ranges E56/E59.

You manufacture sensitive electronic products, such as power semiconductors, diodes, diesel injectors and components for medical equipment. For casting purposes, you need systems that guarantee perfection and absolute freedom from voids with minimum casting quantities. Our Micro Casting Systems: Accuracy: Absolutely error-free casting of the smallest quantities; casting quality tolerance less than 0.01 g. Flexibility: Suitable for highly filled, abrasive casting resins under vacuum or atmosphere. Control: Patented dosing control unit for plant and process monitoring; glass cylinder design also allows direct observation of the preparation process.Compatibility: Modular design; cell construction makes it ideal for integration into existing production lines.