Results for
WALTER STAUFFENBERG GMBH & CO. KG
Germany
With the battery-operated STAUFF Press Assembly Machine SPR-PRC-H-M, STAUFF provides an ergonomically designed, light-weight and at the same time robust device for the assembly of cutting rings in the Light Series (L) as well as in the Heavy Series (S) according to ISO 8434-1 / DIN 2353 on metric tube ends with outer diameters from 6 mm to 42 mm. The machine has been designed for hand-held, tripod- or table-mounted operation and offers the best technical compromise between maximum flexibility, economic efficiency and a high level of process reliability with considerable reduction of time and cost for the assembly of cutting ring fittings. Short tool change and setup times (with only a few seconds required to manually adjust the assembly pressure) make it possible to carry out the assembly of medium and even small quantities of cutting ring fittings, e.g. during maintenance, servicing, conversion and repair works on hydraulic pipe and tube systems. With the rechargeable battery...
Request for a quoteKW HYDRAULIK GMBH
Germany
Cable cutting unit in several sizes for cutting cables, in case of failure under voltage.
Request for a quoteWIWOX GMBH SURFACE SYSTEMS
Germany
If the service is right, every production plant will work economically for many years. We offer you a qualified repair and maintenance service, even for older machines and third-party products. Our service technicians will look after you quickly and anywhere with fully equipped vehicles. We pay attention to the good training of our personnel. Experienced mechanics, locksmiths or electronics specialists offer you every support to ensure the perfect functioning of the delivered systems. Our plant service – also for older machines and other manufactures!
Request for a quoteEUROBALT ENGINEERING OÜ
Estonia
Eurobalt Engineering is an Estonian company specializing in manufacturing metal parts by using various technologies. Our products are shipped to the countries of the EU, Asia, and the CIS. One of our major business areas is the production of parts for hydraulic cylinders. Nowadays, competition in the hydraulic cylinder market is a challenge that cannot be underestimated. Decisive factors are price and quality – both of them strongly depend on the efficiency of production and procurement chains of a hydraulic cylinder factory. Our company offers a one stop solution for a hydraulic cylinder factory – we can produce and deliver all kinds of metal parts for hydraulic cylinders so that the factory can focus on assembly and save time and efforts, usually spent on in-house machining. Some examples of the hydraulic parts that we are currently producing: PISTONS END CUPS OF CYLINDERS HYDRAULIC CYLINDER HEAD GLANDS PISTON RODS CYLINDER HOUSING TELESCOPIC PISTONS
Request for a quoteHYDRAULIK SCHWERIN GMBH
Germany
design, manufacture and assembly of hydraulic control blocks in single part and series production
Request for a quoteMCS HYDRAULIC&PNEUMATIC
Turkey
We have power units at difference dimensions and features.
Request for a quoteHYDRAULIK SCHWERIN GMBH
Germany
design, manufacture and assembly of hydraulic control blocks in single part and series production
Request for a quoteHYDRAULIK SCHWERIN GMBH
Germany
Special units 1000 to 50000 liter tank volumes, standard aggregates, motor / pump assemblies, valve stands, storage stations, filter cooling circuits, lubrication systems, engineering and delivery compl. tube sets
Request for a quoteALS HYDRAULIC
Turkey
We have power units at difference dimensions and features
Request for a quoteGIDROLAST CO., LTD
United Kingdom
Hydraulic power units are produced in close cooperation with customers. Highly-qualified technical and commercial marketing staff are continually working to meet the needs and wishes of our customers and their problems from the field of hydraulics. Gidrolast offers our customers knowledge, expertise and experience in solving such problems. Gidrolast engineering knowledge is a core competence of projecting processes. In this process, our engineers design hydraulic power units to customer requirements, all necessary documentation is prepared and risks and production capabilities are assessed and the whole project is prepared for execution. In the sales process, the customer gets a full quotation. The whole process of monitoring the execution of customer’s order is carried out by the business information power unit. In order to delivery process the hydraulic power unit is produced, tested, adjusted and prepared for transport on the basis of technical documentation.
Request for a quoteGIDROLAST CO., LTD
United Kingdom
From the sticky tar sands of Uzbekistan and the frozen windswept wastelands of Ural to arid, sun -leached Texas and the sizzling hot deserts of Saudi Arabia; from the warmth of the Caspian sea to the cold salt spray of the ocean, Gidrolast hydraulic cylinders are the actuators of choice in the gruelling oil field industry, both onshore and offshore. Oil rigs are located in some of the most demanding locations in the world. Blowing sand, sticky tar, extremes of hot and cold temperatures, corrosive elements and heavy-duty use. The cylinders used are often large-bore and long-stroke. Downtime is measured in millions of dollars. In addition to all that, the equipment is often located in remote areas far from civilization. Rugged, reliable cylinders are a must. Gidrolast designs and builds heavy-duty hydraulic cylinders, both rod style and telescopic, to withstand the tough conditions and demanding requirements of the petroleum industry.
Request for a quoteMCS HYDRAULIC&PNEUMATIC
Turkey
We have every type of hydraulic fittings.
Request for a quoteGIDROLAST CO., LTD
United Kingdom
Gidrolast knows heavy trucks. We cut our teeth building hydraulic cylinders for heavy trucks all the way back in 1993. Hydraulic cylinders on trucks are subjected to all forms of contamination that would destroy a poorly designed cylinder. Dirt, grit, rain, salt, tar, chemicals, solvents and cleaning agents all combine to attack the cylinder and its seals. Despite all this, the cylinders are still expected to perform. Cylinder failure means downtime, employee overtime, loss of vehicle availability, less productivity and reduced profit. Gidrolast cylinders are built tough to meet these conditions. They can be found mounted on garbage trucks, dump trucks, belly dumpers, semi end dumpers, boom trucks, knuckle boom loaders, road pavers, concrete mixers, concrete pumps, mobile cranes, tilt beds and tow trucks. Applications include dump cylinders, aerial boom cylinders, compaction cylinders, outrigger cylinders, tilt cylinders, swing cylinders, plough lift cylinders, and more.
Request for a quoteGIDROLAST CO., LTD
United Kingdom
Gidrolast got its start in building rugged hydraulic cylinders for use on heavy trucks in the waste management industry way back in 1994. That means we know first-hand what is required to build cylinders that will tough it out in this industry. So whether the cylinder is operating the gate on a garbage truck or the grapple in a scrap metal yard, the compactor on a scrap baler or lifting the blade of a bulldozer in a land fill site, Gidrolast cylinders are built to last. Both OEMs and end users around the world appreciate the rugged reliability built into each of our cylinders. Careful, experienced design is combined with high-quality manufacturing to make our Gidrolast hydraulic cylinders the cylinders of choice in waste management and recycling equipment. It’s not hard to see why tough, reliable cylinders are required in the waste management and recycling industry, as these pictures clearly testify. Hydraulic cylinders are shown in action in a scrap metal yard above.
Request for a quoteALLMATIC-JAKOB SPANNSYSTEME GMBH
Germany
Scope of application: -Conventional and CNC-controlled milling machines – for efficient precision machining -Horizontal installation – great variability and flexibility Product features : -Excellent ease of operation guarantees optimal handling in every situation -Fast adjustment for clamping range preselection -The clamping force is generated and preset via the hydraulic pressure of a hydraulic unit -Integrated scrapers ensure functional reliability and minimise cleaning -Fixing on the machine table by means of mounting holes in the vice base. Additional holes can be made in the soft middle section of the vice base -Optional centre jaw allows two or more workpieces to be clamped -Coarse adjustment is performed by turning the spindle. The residual stroke of up to 4.5 mm is performed via a hydraulic unit with spring reset by means of a single-acting cylinder
Request for a quoteALLMATIC-JAKOB SPANNSYSTEME GMBH
Germany
Scope of application: -Conventional and CNC-controlled milling machines – for efficient precision machining -Horizontal installation – great variability and flexibility Product features : -Excellent ease of operation guarantees optimal handling in every situation -Fast adjustment for clamping range preselection -The clamping force is generated and preset via the hydraulic pressure of a hydraulic unit -Integrated scrapers ensure functional reliability and minimise cleaning -Fixing on the machine table by means of mounting holes in the vice base. Additional holes can be made in the soft middle section of the vice base -Optional centre jaw allows two or more workpieces to be clamped -Coarse adjustment is performed by turning the spindle. The residual stroke of up to 4.5 mm is performed via a hydraulic unit with spring reset by means of a single-acting cylinder
Request for a quoteALLMATIC-JAKOB SPANNSYSTEME GMBH
Germany
Scope of application: -Horizontal installation – suitable for vertical CNC-controlled milling machines -For automation of machining centres – particularly suitable for batch production Product features: -Extreme accuracy for your machining -The clamping force is generated via the pressure from a hydraulic unit with a hydraulic clamping stroke of up to 4.5 mm -The clamping force is steplessly adjusted by regulating the hydraulic pressure on the hydraulic unit. A hand crank is provided for coarse adjustment of the clamping range -The spindle contains a single-acting hydraulic piston and an additional Belleville spring assembly
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
ALLMATIC-JAKOB SPANNSYSTEME GMBH
Germany
Scope of application: -Horizontal installation – suitable for vertical CNC-controlled milling machines -For automation of machining centres – particularly suitable for batch production -The hydraulic spindle also enables the use of support jaws with which a wide range of unmachined parts, from flame-cut and sawn materials through to complex castings, can be clamped securely and economically. Suitable for materials with a strength of up to approx. 1000 N/mm². Product features: -Extreme accuracy for your machining -The clamping force is generated via the pressure from a hydraulic unit with a hydraulic clamping stroke of up to 4.5 mm -The clamping force is steplessly adjusted by regulating the hydraulic pressure on the hydraulic unit. A hand crank is provided for coarse adjustment of the clamping range -The spindle contains a single-acting hydraulic piston and an additional Belleville spring assembly
Request for a quoteHYDRAULIK SCHWERIN GMBH
Germany
Our standard range was developed with regard to technical and economic aspects especially for the increased requirements in machine and plant manufacturing. Steel and aluminum manifolds, adapter, blind and intermediate measurement plates are in stock at any time, allowing us to quickly meet your urgent requirements for various pressure stages. All plates have corrosion protection (zinc-plated or anodized).
Request for a quoteHYDRAULIK SCHWERIN GMBH
Germany
design, manufacture and assembly of hydraulic control blocks in single part and series production
Request for a quoteHYDRAULIK SCHWERIN GMBH
Germany
design, manufacture and assembly of hydraulic control blocks in single part and series production
Request for a quoteHYDRAULIK SCHWERIN GMBH
Germany
design, manufacture and assembly of hydraulic control blocks in single part and series production
Request for a quoteANDREAS MAIER GMBH & CO. KG (AMF)
Germany
Hydraulic clamping systems from AMF: powerful, precise and flexible. The hydraulic clamping systems from AMF include a wide range of components, which in turn are available in many different designs. This means that we are able to offer fully developed technology with different features tailored precisely to the needs of the different areas of use.
Request for a quoteHYDRAULIK SCHWERIN GMBH
Germany
design, manufacture and assembly of hydraulic control blocks in single part and series production
Request for a quoteHYDROFORMA, LTD
Ukraine
Press Features: Rated force: 400 kN; Working stroke: 300 mm; Working pressure: up to 160 bar; Running time: 33 seconds; Total power of engines: 4 kW; Power supply: 380 V, 50 Hz; Control: semi-automatic (sensors); Dimensions: 1100 * 1000 * 2110 mm Weight: 2,5 t.
Request for a quoteResults for
Repairs of hydraulic systems - Import exportNumber of results
26 ProductsCompany type
Category