• europages
  • >
  • COMPANIES - SUPPLIERS - SERVICE PROVIDERS
  • >
  • refrigeration technology

Results for

Refrigeration technology - Import export

Slovakia

Verified by Europages

As with air conditioning, our refrigeration work is carried out in the manufacturing plant. We build new customized air handling and refrigeration equipment according to drawings, ensuring reliable cooling and ideal climatic conditions for the environment.

Request for a quote

Lithuania

The CO2 vertical rack is constructed as a single unit on a powder coated steel frame. Vertically build to reduce the footprint, this product has a sufficiently high power potential. This is the unit with the highest power capacity per square meter. Therefore it is ideal for the demands of small food retail stores. Vertical rack system is designed with a well-known refrigeration technologies that have been reliably tested. This frame can be assembled with maximum of 4 compressors and manufactured for medium and low temperature cooling, providing up to 75 kW of refrigeration capacity. GREEN SOLUTIONS | This unit is a part of Refra‘s environmentally friendly product group, as it is made using CO2 refrigerant. Such low GWP solutions are designed to have better efficiencies and capacities, as well as less environmental damage.

Request for a quote

Germany

In air conditioning and refrigeration technology, particularly in commercial and industrial refrigeration systems, environmentally friendly solutions are becoming more and more important. Optimum results are been obtained by an increase in efficiency and the use of ecologically safe refrigerants such as CO2 (R744), which are mainly used in the transcritical part with higher operating pressures. However, the use of CO2 leads to higher operating pressures potentially up to 130 bar. SANHA Ref HP fittings are specifically designed for such operating pressures. They are ideally suited for pipes in refrigeration systems with a maximum operating pressure of up to 130 bar (other pressures on request), a minimum temperature of -196 ° C and a maximum temperature of 150 °C for fluids in Group 2 according to European Pressure Equipment Directive (PED 97 / 23 / EC).

Request for a quote

Germany

Verified by Europages

Other information Series 210 Inner height hi: 21 mm Inner widths Bi: 30 - 120 mm bending radii R: 38 - 200 mm Pitch: 30.5 mm The E4.21 series is identical to 210 series and replaces it. E4.21 - E-Chain® with crossbars at every link Series 220 Inner height hi: 28 mm Inner widths Bi: 40 - 300 mm bending radii R: 55 - 250 mm Pitch: 46 mm E-Chain® with crossbars at every link Series 280 Inner height hi: 32 mm Inner widths Bi: 50 - 400 mm bending radii R: 63 - 300 mm Pitch: 56 mm E-Chain® with crossbars at every link Series 380 Inner height hi: 42 mm Inner widths Bi: 50 - 400 mm bending radii R: 75 - 350 mm Pitch: 67 mm E-Chain® with crossbars at every link Series 400 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 600 Inner height hi: 108 mm Inner widths Bi: 200 - 600 mm bending radii R: 200 - 1000 mm Pitch: 143 mm E-Chain® with crossbars at every link Series 640 Inner height hi: 112 mm Inner widths Bi: 87 - 562 mm bending radii R: 200 - 1000 mm Pitch: 143 mm E-Chain® with crossbars at every link Series 290 Inner height hi: 32 mm Inner widths Bi: 50 - 400 mm bending radii R: 63 - 300 mm Pitch: 56 mm E-Chain® with crossbars at every other link Series 390 Inner height hi: 42 mm Inner widths Bi: 50 - 400 mm bending radii R: 75 - 350 mm Pitch: 67 mm E-Chain® with crossbars at every other link Series 410 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 601 Inner height hi: 108 mm Inner widths Bi: 200 - 600 mm bending radii R: 200 - 1000 mm Pitch: 143 mm E-Chain® with crossbars at every other link Series R760 Inner height hi: 28 mm Inner widths Bi: 50 - 300 mm bending radii R: 63 - 250 mm Pitch: 46 mm E-Tube, swivel lid Series R770 Inner height hi: 32 mm Inner widths Bi: 50 - 300 mm bending radii R: 125 - 300 mm Pitch: 56 mm E-Tube, swivel lid Series R780 Inner height hi: 42 mm Inner widths Bi: 50 - 300 mm bending radii R: 125 - 350 mm Pitch: 67 mm E-Tube, swivel lid Series R880 Inner height hi: 56 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Tube, swivel lid Series R608 Inner height hi: 108 mm Inner widths Bi: 200 - 500 mm bending radii R: 250 - 1000 mm Pitch: 143 mm E-Tube, swivel lid Assembly tool for E4-series For the practical opening and closing of the E4 series. Big savings in assembly time Assembly tool for E4-series IPA certificate: Clean room ISO class 3 (DIN 14644-1) at v = 1 m/s for Series 280.10.100.0 tested ESD classification: Electrically conductive ESD/Atex versions on request Other information Series 210 Inner height hi: 21 mm Inner widths Bi: 30 - 120 mm bending radii R: 38 - 200 mm Pitch: 30.5 mm The E4.21 series is identical to 210 series and replaces it. E4.21 - E-Chain® with crossbars at every link Series 220 Inner height hi: 28 mm Inner widths Bi: 40 - 300 mm bending radii R: 55 - 250 mm Pitch: 46 mm E-Chain® with crossbars at every link Series 280 Inner height hi: 32 mm Inner widths Bi: 50 - 400 mm bending radii R: 63 - 300 mm Pitch: 56 mm E-Chain® with crossbars at every link Series 380 Inner height hi: 42 mm Inner widths Bi: 50 - 400 mm bending radii R: 75 - 350 mm Pitch: 67 mm E-Chain® with crossbars at every link Series 400 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 600 Inner height hi: 108 mm Inner widths Bi: 200 - 600 mm bending radii R: 200 - 1000 mm Pitch: 143 mm E-Chain® with crossbars at every link Series 640 Inner height hi: 112 mm Inner widths Bi: 87 - 562 mm bending radii R: 200 - 1000 mm Pitch: 143 mm E-Chain® with crossbars at every link Series 290 Inner height hi: 32 mm Inner widths Bi: 50 - 400 mm bending radii R: 63 - 300 mm Pitch: 56 mm E-Chain® with crossbars at every other link Series 390 Inner height hi: 42 mm Inner widths Bi: 50 - 400 mm bending radii R: 75 - 350 mm Pitch: 67 mm E-Chain® with crossbars at every other link Series 410 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 601 Inner height hi: 108 mm Inner widths Bi: 200 - 600 mm bending radii R: 200 - 1000 mm Pitch: 143 mm E-Chain® with crossbars at every other link Series R760 Inner height hi: 28 mm Inner widths Bi: 50 - 300 mm bending radii R: 63 - 250 mm Pitch: 46 mm E-Tube, swivel lid Series R770 Inner height hi: 32 mm Inner widths Bi: 50 - 300 mm bending radii R: 125 - 300 mm Pitch: 56 mm E-Tube, swivel lid Series R780 Inner height hi: 42 mm Inner widths Bi: 50 - 300 mm bending radii R: 125 - 350 mm Pitch: 67 mm E-Tube, swivel lid Series R880 Inner height hi: 56 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Tube, swivel lid Series R608 Inner height hi: 108 mm Inner widths Bi: 200 - 500 mm bending radii R: 250 - 1000 mm Pitch: 143 mm E-Tube, swivel lid Assembly tool for E4-series For the practical opening and closing of the E4 series. Big savings in assembly time Assembly tool for E4-series E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining, separating and opening of the E-Chain® and E-Tubes. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. System E4/00 E4/00-E-Chain® with 4-piece structure The low-noise E4 chain Further noise reduction with sound dampers (E4/101 series) Wide application range Numerous interior separation options Large accessory kits Widths up to 2000 mm through extension links Snap-open along both sides Max. travel distance: Over 200 m Typical industrial sectors and applications Robotics and handling systems Materials-Handling Technology Refrigeration engineering Construction machinery Machine tools Wood working Any type of machines Semiconductor Clean room applications cold storage houses Welding machines Maritime applications General mechanical engineering etc. IPA certificate: Clean room ISO class 3 (DIN 14644-1) at v = 1 m/s for Series 280.10.100.0 tested ESD classification: Electrically conductive ESD/Atex versions on request

Request for a quote

Germany

Verified by Europages

Overview of E4.1 benefits Additional information Series E4.21 Inner height hi: 21 mm Inner widths Bi: 30 - 120 mm bending radii R: 38 - 200 mm Pitch: 30.5 mm E-Chain® with crossbars at every link Series E4.28 Inner height hi: 28 mm Inner widths Bi: 40 - 300 mm bending radii R: 55 - 250 mm Pitch: 46 mm E-Chain® with crossbars at every link Series E4.32 Inner height hi: 32 mm Inner widths Bi: 50 - 400 mm bending radii R: 63 - 300 mm Pitch: 56 mm E-Chain® with crossbars at every link Series E4.42 Inner height hi: 42 mm Inner widths Bi: 50 - 400 mm bending radii R: 75 - 350 mm Pitch: 67 mm E-Chain® with crossbars at every link Series E4.56 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series E4.80 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 1000 mm Pitch: 111 mm E-Chain® with crossbars at every link Series 1640 Inner height hi: 112 mm Inner widths Bi: 50 - 600 mm bending radii R: 200 - 600 mm Pitch: 143 mm E-Chain® with crossbars at every link E4.112 series Inner height hi: 112 mm Inner widths Bi: 50 - 600 mm bending radii R: 200 - 1000 mm Pitch: 143 mm E-Chain® with crossbars at every link E4.162 series Inner height hi: 162 mm Inner widths Bi: 200 - 600 mm bending radii R: 250 - 1000 mm Pitch: 200 mm E-Chain® with crossbars at every link Series 800 Inner height hi: 200 mm Inner widths Bi: 200 - 600 mm bending radii R: 325 - 1000 mm Pitch: 250 mm E-Chain® with crossbars at every link Series 840 Inner height hi: 204 mm Inner widths Bi: 100 - 563 mm bending radii R: 325 - 1000 mm Pitch: 250 mm E-Chain® with crossbars at every link Series E4.350 Inner height hi: 350 mm Inner widths Bi: 400 - 800 mm bending radii R: 500 - 1000 mm Pitch: 470 mm E-Chain® with crossbars at every link Series H4.32 Inner height hi: 32 mm Inner widths Bi: 50 - 400 mm bending radii R: 63 - 300 mm Pitch: 56 mm E-Chain® with crossbars at every other link Series H4.42 Inner height hi: 42 mm Inner widths Bi: 50 - 400 mm bending radii R: 75 - 350 mm Pitch: 67 mm E-Chain® with crossbars at every other link Series H4.56 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series H4.80 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 1000 mm Pitch: 111 mm E-Chain® with crossbars at every other link Series H4.112 Inner height hi: 112 mm Inner widths Bi: 50 - 600 mm bending radii R: 200 - 1000 mm Pitch: 143 mm E-Chain® with crossbars at every other link Series R4.28 Inner height hi: 28 mm Inner widths Bi: 50 - 300 mm bending radii R: 63 - 250 mm Pitch: 46 mm E-Tube, swivel lid Series R4.32 Inner height hi: 32 mm Inner widths Bi: 50 - 300 mm bending radii R: 125 - 300 mm Pitch: 56 mm E-Tube, swivel lid Series R4.42 Inner height hi: 42 mm Inner widths Bi: 50 - 300 mm bending radii R: 125 - 350 mm Pitch: 67 mm E-Tube, swivel lid Series R4.56 Inner height hi: 56 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Tube, swivel lid Series R4.80 Inner height hi: 80 mm Inner widths Bi: 150 - 460 mm bending radii R: 200 - 1000 mm Pitch: 111 mm E-Tube, swivel lid Series R1608 Inner height hi: 112 mm Inner widths Bi: 200 - 400 mm bending radii R: 250 - 600 mm Pitch: 143 mm E-Tube, swivel lid R4.112 series Inner height hi: 112 mm Inner widths Bi: 200 - 400 mm bending radii R: 250 - 1000 mm Pitch: 143 mm E-Tube, swivel lid Assembly tool for E4-series For the practical opening and closing of the E4 series. Big savings in assembly time Assembly tool for E4-series IPA classification -Report IG 1303-640, tested E4.32.10.063.0 41 dB(A) determined at the igus® laboratory, v = 1.8 m/s unsupported ESD classification: Electrically conductive ESD/Atex versions on request System E4.1 proven in long travels e-tubes available as special design with HT material for 850°C hot chips Overview of E4.1 benefits Additional information Series E4.21 Inner height hi: 21 mm Inner widths Bi: 30 - 120 mm bending radii R: 38 - 200 mm Pitch: 30.5 mm E-Chain® with crossbars at every link Series E4.28 Inner height hi: 28 mm Inner widths Bi: 40 - 300 mm bending radii R: 55 - 250 mm Pitch: 46 mm E-Chain® with crossbars at every link Series E4.32 Inner height hi: 32 mm Inner widths Bi: 50 - 400 mm bending radii R: 63 - 300 mm Pitch: 56 mm E-Chain® with crossbars at every link Series E4.42 Inner height hi: 42 mm Inner widths Bi: 50 - 400 mm bending radii R: 75 - 350 mm Pitch: 67 mm E-Chain® with crossbars at every link Series E4.56 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series E4.80 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 1000 mm Pitch: 111 mm E-Chain® with crossbars at every link Series 1640 Inner height hi: 112 mm Inner widths Bi: 50 - 600 mm bending radii R: 200 - 600 mm Pitch: 143 mm E-Chain® with crossbars at every link E4.112 series Inner height hi: 112 mm Inner widths Bi: 50 - 600 mm bending radii R: 200 - 1000 mm Pitch: 143 mm E-Chain® with crossbars at every link E4.162 series Inner height hi: 162 mm Inner widths Bi: 200 - 600 mm bending radii R: 250 - 1000 mm Pitch: 200 mm E-Chain® with crossbars at every link Series 800 Inner height hi: 200 mm Inner widths Bi: 200 - 600 mm bending radii R: 325 - 1000 mm Pitch: 250 mm E-Chain® with crossbars at every link Series 840 Inner height hi: 204 mm Inner widths Bi: 100 - 563 mm bending radii R: 325 - 1000 mm Pitch: 250 mm E-Chain® with crossbars at every link Series E4.350 Inner height hi: 350 mm Inner widths Bi: 400 - 800 mm bending radii R: 500 - 1000 mm Pitch: 470 mm E-Chain® with crossbars at every link Series H4.32 Inner height hi: 32 mm Inner widths Bi: 50 - 400 mm bending radii R: 63 - 300 mm Pitch: 56 mm E-Chain® with crossbars at every other link Series H4.42 Inner height hi: 42 mm Inner widths Bi: 50 - 400 mm bending radii R: 75 - 350 mm Pitch: 67 mm E-Chain® with crossbars at every other link Series H4.56 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series H4.80 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 1000 mm Pitch: 111 mm E-Chain® with crossbars at every other link Series H4.112 Inner height hi: 112 mm Inner widths Bi: 50 - 600 mm bending radii R: 200 - 1000 mm Pitch: 143 mm E-Chain® with crossbars at every other link Series R4.28 Inner height hi: 28 mm Inner widths Bi: 50 - 300 mm bending radii R: 63 - 250 mm Pitch: 46 mm E-Tube, swivel lid Series R4.32 Inner height hi: 32 mm Inner widths Bi: 50 - 300 mm bending radii R: 125 - 300 mm Pitch: 56 mm E-Tube, swivel lid Series R4.42 Inner height hi: 42 mm Inner widths Bi: 50 - 300 mm bending radii R: 125 - 350 mm Pitch: 67 mm E-Tube, swivel lid Series R4.56 Inner height hi: 56 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Tube, swivel lid Series R4.80 Inner height hi: 80 mm Inner widths Bi: 150 - 460 mm bending radii R: 200 - 1000 mm Pitch: 111 mm E-Tube, swivel lid Series R1608 Inner height hi: 112 mm Inner widths Bi: 200 - 400 mm bending radii R: 250 - 600 mm Pitch: 143 mm E-Tube, swivel lid R4.112 series Inner height hi: 112 mm Inner widths Bi: 200 - 400 mm bending radii R: 250 - 1000 mm Pitch: 143 mm E-Tube, swivel lid Assembly tool for E4-series For the practical opening and closing of the E4 series. Big savings in assembly time Assembly tool for E4-series IPA Classification Report IG 1303-640, tested series E4.32.10.063.0 E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Assembly instruction video Assembly video with accurate description for joining, splitting and opening e-chains® and e-tubes. Installation instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. E 4.1 E4.1-E-Chain® with 4-piece structure Smooth, cable friendly inner surfaces Low noise operation through integrated "brake" on the radial stop dogs Sound dampers as an additional noise-reducing option Wide application range Numerous interior separation options Large accessory kits Widths up to 2000 mm through extension links To open on both sides Max. travel distance: Over 200 m Typical industrial sectors and applications: Krane Indoor Cranes Composting systems Sewage treatment plants Machine tools General mechanical engineering Materials-Handling Technology Refrigeration engineering Construction machinery Wood working Robotics and handling systems IPA classification -Report IG 1303-640, tested E4.32.10.063.0 41 dB(A) determined at the igus® laboratory, v = 1.8 m/s unsupported ESD classification: Electrically conductive ESD/Atex versions on request System E4.1 proven in long travels e-tubes available as special design with HT material for 850°C hot chips

Request for a quote

Germany

Verified by Europages

Category Low pressure hoses and fittings / Refrigerant technology / Crimp fittings / Service valves Product number supplier 212992

Request for a quote

Germany

Verified by Europages

Category Low pressure hoses and fittings / Refrigerant technology / Crimp fittings / Service valves Product number supplier 212991

Request for a quote

Thailand

Verified by Europages

Honeywell Refrigerants Gas is the established technology leader in the development of flucrine-oased (HFC) refrigerants for the commercial and industrial refrigeration industry worldwide. And, as you would expect from a world-class supplier, we have Been at the forefront of the industry's drive to develop these safer, non-ozone-depletirg alternatives to the Oder technology, environmentally unfriendly CFC and HCFC refrigerants, in compliance with global legislation for their phase-out.To ensure that customers are fully supported in this transition, Honeywell has dedicated its research resources to developing a comprehensive range of alternative intermediate and long-term refrigerants, that are not only safer to use out that are able to meet or surpass the performance levels of the products they replace.For commercial and industrial refrigeration replacement of (CFC) Genetron®

Request for a quote

Thailand

Verified by Europages

Honeywell Refrigerants Gas is the established technology leader in the development of flucrire-oased (HFC) refrigerants for the commercial and industrial refrigeration industry worldwide. And, as you would expect from a world-class supplier, we have Been at the forefront of the industry's drive to develop these safer, non-ozone-depletirg alternatives to the Oder technology, environmentally unfriendly CFC and HCFC refrigerants, in compliance with global legislation for their phase-out.To ensure that customers are fully supported in this transition, Honeywell has dedicated its research resources to developing a comprehensive range of alternative intermediate and long-term refrigerants, that are not only safer to use out that are able to meet or surpass the performance levels of the products they replace.For commercial and industrial refrigeration replacement of (CFC) Genetron

Request for a quote

Netherlands

Verified by Europages

Profiles for Industrial Applications. In the large group of industrial applications (refrigeration and air-conditioning technology, machines, production lines, switchgear housings, wind power, tracked crane systems, containers, etc.) we produce individual sealing systems tailored to our customers’ needs. Special designs made on short notice--even in small series--made of diverse plastic or elastomer qualities, or combinations of both materials or assemblies lets us be your technical problem solver. Our huge stock of standard profiles makes us a reliable partner for a wide-range of applications. Sealing Profiles Through application-specific production of rings, frames or fixed lengths, the product is precisely tailored to any purpose. The function of the profile is optimally executed even in the radiuses or corners. We manufacture ready-made profiles in various processes, from cold bonding, film bonding, injection molding to sealing.

Request for a quote

Lithuania

CO2 Light is perfectly suitable for small food retail stores or gas stations because of its small scale. It can provide up to 50 kW of cooling capacity, split between medium temperature and low temperature refrigeration. These rack systems are designed with reliable refrigeration technologies that are well tested and proven in the market. Assembled with maximum of 3 compressors on a welded frame, made of powder coated steel. GREEN SOLUTIONS | This unit is a part of Refra‘s environmentally friendly product group, as it is made using CO2 refrigerant. Such low GWP solutions are designed to have better efficiencies and capacities, as well as less environmental damage.

Request for a quote

Lithuania

Refra manufactures pump stations for waterloop systems with the cooling capacity from 30 kw to 250 kW. These systems produce distributed cooling at different temperatures with a single condensing water loop. Together with Refra pump stations, the system creates a fully integrated refrigeration technology that eliminates the need for complex refrigeration systems and greatly simplifies installation work. Built on a super slim assembled galvanized steel frame with powder coating. Standard selection includes single or dual pump with inverter, glycol tank with filling pump, shut-off valves, control board with controller and necessary control sensors as well as a three-way valve, manometers and a coarse cleaning filter. Extra features, such as emergency heat exchanger with full controls or bubble filter separator can be combined. An additional heat recovery pump can also be added to extract maximum efficiency from the system.

Request for a quote

Lithuania

High power reversible heat pumps with the heating power from 100 kW to 400 kW are designed for industrial and commercial buildings with large power demand. Manufactured using R290 refrigerant only and full-inverter technology the units are a part of the extremely economical and environmentally friendly Refra product line. With high cooling capacity and many possible extra features these products are widely used in various factories, immense supermarkets and warehouses. These pumps can be used for heating purposes at ambient temperature of -15°or higher as well as for cooling purposes with the capacity of 70 kW to 280 kW. This dual solution is very efficient in terms of price, installation and space, as there is no need to install two separate systems. CJ heat pumps can be made with one to three circuits to ensure continuous system operation in case of emergency – if one circuit is damaged, the others can still use the remaining unit capacity to service the end user.

Request for a quote

Lithuania

Medium power range reversible heat pumps with the heating power from 50 kW to 180 kW are designed for commercial and industrial buildings with low to medium power demand. Manufactured using R290 refrigerant only and full-inverter technology the units are a part of the extremely economical and environmentally friendly Refra product line. These pumps can be used for heating purposes at ambient temperature of -15°or higher as well as for cooling purposes with the capacity of 35 kW to 126 kW. This dual solution is very efficient in terms of price, installation and space, as there is no need to install two separate systems. One of the main advantages of this unit is the possibility to add two circuits, which will provide maximum operational safety by ensuring continuous system operation in case of emergency. If one circuit is damaged, the other can still use 50% of unit’s capacity to service the end user.

Request for a quote

Lithuania

Small capacity reversible heat pumps with the heating power from 20 kW to 50 kW are designed for small commercial or industrial applications. Manufactured using R290 refrigerant only and full-inverter technology the units are a part of the extremely economical and environmentally friendly Refra product line. These single circuit heat pumps can be used for heating purposes at ambient temperature of -15°or higher as well as for cooling purposes with the capacity of 14 kW to 35 kW. This dual solution is very efficient in terms of price, installation and space, as there is no need to install two separate systems. Ultra-compact frame construction is assembled with high-quality EC fan motor technology, scroll or reciprocating compressors and a finned tube or microchannel condenser. To prevent ice formation, the frame is equipped with special water drain outlets, which are required to ensure a proper defrosting process.

Request for a quote

Slovakia

Cryomed e-IceChill is a compact, nitrogen-free electric cryochamber that offers advanced whole-body cold therapy for wellness professionals and enthusiasts alike. Key features: Advanced refrigeration technology for even temperature distribution Precision control and oxygen-enriched atmosphere for safety and comfort Space-saving design fits various settings without affecting performance User-friendly operation with a fully automatic mode Two-way intercom and Bluetooth audio system for enhanced client experience Powerful moisture extraction system for back-to-back treatments Customizable exterior with RAL colors or branding options Perfect for rehabilitation centers, spas, gyms, and clinics, the e-IceChill combines innovation with ease of use. Its versatile applications and efficient design make it ideal for businesses looking to expand their wellness offerings.

Request for a quote

Germany

In air conditioning and refrigeration technology, particularly in commercial and industrial refrigeration systems, environmentally friendly solutions are becoming more and more important. Optimum results are been obtained by an increase in efficiency and the use of ecologically safe refrigerants such as CO2 (R744), which are mainly used in the transcritical part with higher operating pressures. However, the use of CO2 leads to higher operating pressures potentially up to 130 bar. SANHA Ref HP fittings are specifically designed for such operating pressures. They are ideally suited for pipes in refrigeration systems with a maximum operating pressure of up to 130 bar (other pressures on request), a minimum temperature of -196 ° C and a maximum temperature of 150 °C for fluids in Group 2 according to European Pressure Equipment Directive (PED 97 / 23 / EC). Reducer

Request for a quote

Do you sell or make similar products?

Sign up to europages and have your products listed

Add my business

Germany

In air conditioning and refrigeration technology, particularly in commercial and industrial refrigeration systems, environmentally friendly solutions are becoming more and more important. Optimum results are been obtained by an increase in efficiency and the use of ecologically safe refrigerants such as CO2 (R744), which are mainly used in the transcritical part with higher operating pressures. However, the use of CO2 leads to higher operating pressures potentially up to 130 bar. SANHA Ref HP fittings are specifically designed for such operating pressures. They are ideally suited for pipes in refrigeration systems with a maximum operating pressure of up to 130 bar (other pressures on request), a minimum temperature of -196 ° C and a maximum temperature of 150 °C for fluids in Group 2 according to European Pressure Equipment Directive (PED 97 / 23 / EC). End cap

Request for a quote

Germany

In air conditioning and refrigeration technology, particularly in commercial and industrial refrigeration systems, environmentally friendly solutions are becoming more and more important. Optimum results are been obtained by an increase in efficiency and the use of ecologically safe refrigerants such as CO2 (R744), which are mainly used in the transcritical part with higher operating pressures. However, the use of CO2 leads to higher operating pressures potentially up to 130 bar. SANHA Ref HP fittings are specifically designed for such operating pressures. They are ideally suited for pipes in refrigeration systems with a maximum operating pressure of up to 130 bar (other pressures on request), a minimum temperature of -196 ° C and a maximum temperature of 150 °C for fluids in Group 2 according to European Pressure Equipment Directive (PED 97 / 23 / EC).

Request for a quote

Germany

In air conditioning and refrigeration technology, particularly in commercial and industrial refrigeration systems, environmentally friendly solutions are becoming more and more important. Optimum results are been obtained by an increase in efficiency and the use of ecologically safe refrigerants such as CO2 (R744), which are mainly used in the transcritical part with higher operating pressures. However, the use of CO2 leads to higher operating pressures potentially up to 130 bar. SANHA Ref HP fittings are specifically designed for such operating pressures. They are ideally suited for pipes in refrigeration systems with a maximum operating pressure of up to 130 bar (other pressures on request), a minimum temperature of -196 ° C and a maximum temperature of 150 °C for fluids in Group 2 according to European Pressure Equipment Directive (PED 97 / 23 / EC). Bend 45° M/F

Request for a quote

Germany

In air conditioning and refrigeration technology, particularly in commercial and industrial refrigeration systems, environmentally friendly solutions are becoming more and more important. Optimum results are been obtained by an increase in efficiency and the use of ecologically safe refrigerants such as CO2 (R744), which are mainly used in the transcritical part with higher operating pressures. However, the use of CO2 leads to higher operating pressures potentially up to 130 bar. SANHA Ref HP fittings are specifically designed for such operating pressures. They are ideally suited for pipes in refrigeration systems with a maximum operating pressure of up to 130 bar (other pressures on request), a minimum temperature of -196 ° C and a maximum temperature of 150 °C for fluids in Group 2 according to European Pressure Equipment Directive (PED 97 / 23 / EC).

Request for a quote

Germany

In air conditioning and refrigeration technology, particularly in commercial and industrial refrigeration systems, environmentally friendly solutions are becoming more and more important. Optimum results are been obtained by an increase in efficiency and the use of ecologically safe refrigerants such as CO2 (R744), which are mainly used in the transcritical part with higher operating pressures. However, the use of CO2 leads to higher operating pressures potentially up to 130 bar. SANHA Ref HP fittings are specifically designed for such operating pressures. They are ideally suited for pipes in refrigeration systems with a maximum operating pressure of up to 130 bar (other pressures on request), a minimum temperature of -196 ° C and a maximum temperature of 150 °C for fluids in Group 2 according to European Pressure Equipment Directive (PED 97 / 23 / EC). Reducing coupling

Request for a quote

Germany

In air conditioning and refrigeration technology, particularly in commercial and industrial refrigeration systems, environmentally friendly solutions are becoming more and more important. Optimum results are been obtained by an increase in efficiency and the use of ecologically safe refrigerants such as CO2 (R744), which are mainly used in the transcritical part with higher operating pressures. However, the use of CO2 leads to higher operating pressures potentially up to 130 bar. SANHA Ref HP fittings are specifically designed for such operating pressures. They are ideally suited for pipes in refrigeration systems with a maximum operating pressure of up to 130 bar (other pressures on request), a minimum temperature of -196 ° C and a maximum temperature of 150 °C for fluids in Group 2 according to European Pressure Equipment Directive (PED 97 / 23 / EC). Bend 45° F/F

Request for a quote

Germany

In air conditioning and refrigeration technology, particularly in commercial and industrial refrigeration systems, environmentally friendly solutions are becoming more and more important. Optimum results are been obtained by an increase in efficiency and the use of ecologically safe refrigerants such as CO2 (R744), which are mainly used in the transcritical part with higher operating pressures. However, the use of CO2 leads to higher operating pressures potentially up to 130 bar. SANHA Ref HP fittings are specifically designed for such operating pressures. They are ideally suited for pipes in refrigeration systems with a maximum operating pressure of up to 130 bar (other pressures on request), a minimum temperature of -196 ° C and a maximum temperature of 150 °C for fluids in Group 2 according to European Pressure Equipment Directive (PED 97 / 23 / EC). SANHA RefHP Tee

Request for a quote

Germany

In air conditioning and refrigeration technology, particularly in commercial and industrial refrigeration systems, environmentally friendly solutions are becoming more and more important. Optimum results are been obtained by an increase in efficiency and the use of ecologically safe refrigerants such as CO2 (R744), which are mainly used in the transcritical part with higher operating pressures. However, the use of CO2 leads to higher operating pressures potentially up to 130 bar. SANHA Ref HP fittings are specifically designed for such operating pressures. They are ideally suited for pipes in refrigeration systems with a maximum operating pressure of up to 130 bar (other pressures on request), a minimum temperature of -196 ° C and a maximum temperature of 150 °C for fluids in Group 2 according to European Pressure Equipment Directive (PED 97 / 23 / EC). Bend 90° F/F

Request for a quote