Recovery of solvents - Import export

ASCO’s innovative ASCOSORB CO2 Stack Gas Recovery Technology turns your vent flue gas into a usable and profitable source of CO2. CO2 gas won by an ASCO Stack Gas Recovery System is a byproduct of flue gas production from boilers as well as from other flue gas sources offering an economic CO2 source to any CO2 consumer or reseller. ASCO, as a provider of complete CO2 solutions, offers CO2 Stack Gas Recovery Systems with various capacities. Reliable CO2 source Reliable and economic source of CO2 to the end user as opposed to self burning processes or purchasing liquid CO2 Reduction in energy usage The ASCOSORB Technology brings to the ASCO CO2 Stack Gas Recovery Plant tremendous reduction in total energy usage offering greatly reduced OPEX only approx. 1.3 MWth / MT produced CO2

This textile based blanket was designed and formulated for extremly sharp dot reproduction on wide range of sgeetfed presses. It is sutable for all kinds of inks and paper/carton stocks and it gives long service life. PROPERTIES New compressible layer coupled with textile carcass improves durability, gives excellent shock absorption and rapid recovery. Resists solvent penetration, reduces the risk of delamination. Unique fabric treatment ensures consistently low setting and optimal laydown. Gives added protection against water and chemical penetration. Specially formulated surface compound ensures optimal ink transfer and enables extra sharp dot reproduction. APPLICATION Sheetfed Packaging Continues F. Conventional * The information on this technical data sheet is based on our general experience.

This textile-based blanket was designed and formulated for extremely sharp dot reproduction and excellent paper feed on a wide range of heatset web presses. It is suitable for all kinds of coated papers for web applications. It also assures a long life service. PROPERTIES New middle compressible layer coupled with textile carcass improves durability, gives excellent shock absorption and rapid recovery. Resists solvent penetration, reduces the risk of delamination. Unique fabric treatment ensures consistent low setting and optimal laydown. Gives additional protection against water and chemical penetration. Specially formulated surface compound ensures optimal ink transfer and enables extra sharp dot reproduction. APPLICATION Heatset Continues F. Conventional * The information on this technical data sheet is based on our general experience.

The Advantage is a revolution in the development of offset printing blankets for the printing industry. The characteristics of its unique construction, which is based on the cord carcass, brings outstanding advantages up to 30% saving in comparison with standard offset printing blankets in the printing process. Blanket designed for sheetfed printing jobs where mixed ink systems are in use on the same press. PROPERTIES Almost no sinking or stretching giving the blanket exceptional dimensional stability. After mounting no need for further re-tensioning thus leading to reduced down time. New compressible layer coupled with the radial cord carcass improves durability, gives excellent shock absorption and rapid recovery. Resists solvent penetration, reduces the risk of de-lamination. The specially formulated mix mode surface compound enables excellent

Advantage is the product of a revolutionary development in offset printing blankets for the printing industry. The unique aspect of this product is its cord carcass structure. In this way, up to 30% savings can be achieved in the printing process compared to standard blankets. Advantage Plus is a blanket specially designed and produced for flat offset printing machines on paper and cardboard. FEATURES Almost no thinning or elongation gives the blanket an important longitudinal stability. It saves time as there is no need to take the tension again after the blanket is mounted. The new compressible layer combined with the radial cord carcass structure provides excellent shock absorption and rapid recovery after impact. Its solvent permeability-resistant structure prevents surface deterioration in a short time, extends blanket life. It is produced in a special way to ensure ink and dot transfer. The sealed substrate provides extra protection against solvent and water permeability.

We manufacture solvent storage and solvent separator tanks, which can be flexibly designed according to your company’s needs. We offer corrosion-resistant, long-lasting, efficient solvent recovery, distillation and storage solutions for your stainless steel solvent separator tank and solvent storage tank needs

The CL series offers medium capacity ranging from 900 to 5100m³/h, it is widely used in many application including: autoclaves, carburetor testing, chucking, condenser exhausting, container filling, cooking, drying, evisceration, exhausting, extruder venting, fiber setting, filtering, forming, gas stripping, molding, pickup and conveying, priming, slot extraction, and solvent recovery. Different with most India cone pump, we are using castings from best domestic foundries，all castings are provided with related material test report . We offering SS420 shaft for all our cast iron pump, it is more reliable in performance and offer longer using life thanIndiaand original Nash CL liquid ring vacuum pump. To meet client’s different installation requirement, we offer both DIN and ANSI flange connection. All our CL liquid ring vacuum pump is 100% performance tested before shipment.

De Smet Engineers & Contractors has been involved in all steps of the production of vegetable oils from oilseeds crushing for the construction of Edible Oils Plants; in this article you will find a more detailed understanding about the process of vegetable oil extraction: First step: Preparation of the oil containing material prior to solvent extraction Cleaning and Drying The plant feedstock must be cleaned so that foreign matters are removed. This applies particularly to sand/silicate and iron which may damage the preparation plant equipment. For some seeds or for some processes the incoming material moisture must be controlled and adjusted for better efficiency of subsequent operations. Mechanical preparation Most of raw materials needs to broken to reduce the particle size to ensure proper cooking and flaking. They are then heated in cooking / conditioning equipment and their moisture further controlled in addition to be softened before the next mechanical operations. After cooking, heated grits are flaked so that the oil cells are broken and the oil more readily available for further solvent extraction or mechanical pressing. Pressing Oilseeds containing above 20 to 25% (rapeseed, sunflower seeds, cottonseeds...) are generally pressed mechanically in order to extract most or part of the oil available in the feedstock. This operation is done through full pressing for maximum oil recovery leaving up to 5 to 10% in the final cake which is marketed as such or through a low pressure pre-pressing operation producing a cake with higher residual oil content which is then recovered in the solvent extraction plant. Dehulling Oil extraction plants produce a solid finished product in addition to the extracted oil; this product (cake or meal) is normally used as an important component for animal feed recipes. Depending on the meal destination, its protein content often needs to be increased and its fibre content minimized. Such characteristics are generally achieved through decortication or dehulling operations that separate the outer part of the feedstock before extracting the oil. Second step: Solvent extraction of the material suitably prepared Extraction In the solvent extractor, solids (Flakes from the flaking machines or cakes from the pre-presses) are conveyed through the equipment while a mixture of hexane and oil (miscella) is sprayed counter-current. The extractor produces therefore deoiled solids containing solvent and miscella. Desolventization Deoiled solids coming out of the extractor are conveyed to a dedicated equipment that completely removes the remaining solvent while preserving the meal quality: the desolventizer. This apparatus is usually combined with additional sections for drying and cooling the meal to the required storage and market parameters. Miscella distillation Solvent contained in the miscella is completely removed under vacuum and optimum temperature for preserving oil quality. The solvent from the distillation as well as the one removed at meal desolventization stage are then recycled to the extractor. Solvent recovery Since the air entering the process together with material fed to the extractor is laden with solvent when it is removed from the plant it first pass through a specially designed absorption column to limit emission to an acceptable level. Meal treatment The extracted meal is often subject for further treatment, including grinding to obtain the required granulometry or pelletizing to reduce its volume during transport.

The EcoSolv solvent recycling system ensures LEIBINGER inkjet printers consume the smallest possible amount of solvent. A JET3up or JET2neo series printer with EcoSolv consumes up to 50% less solvent. EcoSolv recovers the evaporated solvent from the printer exhaust air through condensation and directs it back into the supply tank. Solvent recovery allows you to save cash and protect the environment!

Shell and Tube Heat Exchangers | Air Coolers, Air Heaters, Pressure Vessels | Gas cooling in pneumatic conveying systems | Air cooling in industrial refrigeration | Air drying in textile machines | Air heating & cooling in HVAC systems | Coolers for A.C and D.C motors | Coolers for power transformers | Diesel and gas engines water cooling | Air preheaters for boiler plants | Economizers for steam, oil and hot water generation | Hydrocarbon condenser | Industrial process water cooling | Inter and after coolers | Oil cooling in lubrication system | Solvent recovery by condensation | Steam condenser

Shell and Tube Heat Exchangers | Air Coolers, Air Heaters, Pressure Vessels | Gas cooling in pneumatic conveying systems | Air cooling in industrial refrigeration | Air drying in textile machines | Air heating & cooling in HVAC systems | Coolers for A.C and D.C motors | Coolers for power transformers | Diesel and gas engines water cooling | Air preheaters for boiler plants | Economizers for steam, oil and hot water generation | Hydrocarbon condenser | Industrial process water cooling | Inter and after coolers | Oil cooling in lubrication system | Solvent recovery by condensation | Steam condenser

Shell and Tube Heat Exchangers | Air Coolers, Air Heaters, Pressure Vessels | Gas cooling in pneumatic conveying systems | Air cooling in industrial refrigeration | Air drying in textile machines | Air heating & cooling in HVAC systems | Coolers for A.C and D.C motors | Coolers for power transformers | Diesel and gas engines water cooling | Air preheaters for boiler plants | Economizers for steam, oil and hot water generation | Hydrocarbon condenser | Industrial process water cooling | Inter and after coolers | Oil cooling in lubrication system | Solvent recovery by condensation | Steam condenser

Shell and Tube Heat Exchangers | Air Coolers, Air Heaters, Pressure Vessels | Gas cooling in pneumatic conveying systems | Air cooling in industrial refrigeration | Air drying in textile machines | Air heating & cooling in HVAC systems | Coolers for A.C and D.C motors | Coolers for power transformers | Diesel and gas engines water cooling | Air preheaters for boiler plants | Economizers for steam, oil and hot water generation | Hydrocarbon condenser | Industrial process water cooling | Inter and after coolers | Oil cooling in lubrication system | Solvent recovery by condensation | Steam condenser

Shell and Tube Heat Exchangers | Air Coolers, Air Heaters, Pressure Vessels | Gas cooling in pneumatic conveying systems | Air cooling in industrial refrigeration | Air drying in textile machines | Air heating & cooling in HVAC systems | Coolers for A.C and D.C motors | Coolers for power transformers | Diesel and gas engines water cooling | Air preheaters for boiler plants | Economizers for steam, oil and hot water generation | Hydrocarbon condenser | Industrial process water cooling | Inter and after coolers | Oil cooling in lubrication system | Solvent recovery by condensation | Steam condenser

Finned or bare tube coils for air - gas heating or cooling (heavy duty) Shell and Tube Heat Exchangers | Air Coolers, Air Heaters, Pressure Vessels | Gas cooling in pneumatic conveying systems | Air cooling in industrial refrigeration | Air drying in textile machines | Air heating & cooling in HVAC systems | Coolers for A.C and D.C motors | Coolers for power transformers | Diesel and gas engines water cooling | Air preheaters for boiler plants | Economizers for steam, oil and hot water generation | Hydrocarbon condenser | Industrial process water cooling | Inter and after coolers | Oil cooling in lubrication system | Solvent recovery by condensation | Steam condenser

Shell and Tube Heat Exchangers | Air Coolers, Air Heaters, Pressure Vessels | Gas cooling in pneumatic conveying systems | Air cooling in industrial refrigeration | Air drying in textile machines | Air heating & cooling in HVAC systems | Coolers for A.C and D.C motors | Coolers for power transformers | Diesel and gas engines water cooling | Air preheaters for boiler plants | Economizers for steam, oil and hot water generation | Hydrocarbon condenser | Industrial process water cooling | Inter and after coolers | Oil cooling in lubrication system | Solvent recovery by condensation | Steam condenser

Shell and Tube Heat Exchangers | Air Coolers, Air Heaters, Pressure Vessels | Gas cooling in pneumatic conveying systems | Air cooling in industrial refrigeration | Air drying in textile machines | Air heating & cooling in HVAC systems | Coolers for A.C and D.C motors | Coolers for power transformers | Diesel and gas engines water cooling | Air preheaters for boiler plants | Economizers for steam, oil and hot water generation | Hydrocarbon condenser | Industrial process water cooling | Inter and after coolers | Oil cooling in lubrication system | Solvent recovery by condensation | Steam condenser

Shell and Tube Heat Exchangers | Air Coolers, Air Heaters, Pressure Vessels | Gas cooling in pneumatic conveying systems | Air cooling in industrial refrigeration | Air drying in textile machines | Air heating & cooling in HVAC systems | Coolers for A.C and D.C motors | Coolers for power transformers | Diesel and gas engines water cooling | Air preheaters for boiler plants | Economizers for steam, oil and hot water generation | Hydrocarbon condenser | Industrial process water cooling | Inter and after coolers | Oil cooling in lubrication system | Solvent recovery by condensation | Steam condenser

Shell and Tube Heat Exchangers | Air Coolers, Air Heaters, Pressure Vessels | Gas cooling in pneumatic conveying systems | Air cooling in industrial refrigeration | Air drying in textile machines | Air heating & cooling in HVAC systems | Coolers for A.C and D.C motors | Coolers for power transformers | Diesel and gas engines water cooling | Air preheaters for boiler plants | Economizers for steam, oil and hot water generation | Hydrocarbon condenser | Industrial process water cooling | Inter and after coolers | Oil cooling in lubrication system | Solvent recovery by condensation | Steam condenser

Shell and Tube Heat Exchangers | Air Coolers, Air Heaters, Pressure Vessels | Gas cooling in pneumatic conveying systems | Air cooling in industrial refrigeration | Air drying in textile machines | Air heating & cooling in HVAC systems | Coolers for A.C and D.C motors | Coolers for power transformers | Diesel and gas engines water cooling | Air preheaters for boiler plants | Economizers for steam, oil and hot water generation | Hydrocarbon condenser | Industrial process water cooling | Inter and after coolers | Oil cooling in lubrication system | Solvent recovery by condensation | Steam condenser

100 - 3600 CFM / 170 to 6,100 m³/h The NASH SC vacuum pump and compressor, which replaced the popular NASH CL pump in the 1980's, is still being manufactured at Gardner Denver Nash. The SC pump, more flexible and simpler to install and easy to maintain, made it a very reliable pump to be used in many applications. SC pumps are found in applications including: autoclaves, chucking, container filling, labeling and forming, cooking, deaerating, deodorizing food and fats, drying, evaporating, eviscerating, exhausting, extruder venting, fiber setting, filtering, forming, gas stripping, laboratory central vacuum systems, medical and dental vacuum draining, molding, pickup and conveying, priming, slot extraction, and solvent recovery. All SC models are still available from Gardner Denver Nash, the original designer and manufacturer. Whether you have an existing SC pump running in your plant that is in need of service, repair, or replacement with a new or remanufactured duplicate SC pump, Gardner Denver Nash is there for all of the above.

170 - 14000 CFM / 240 to 23,700 m³/h The NASH CL Vacuum Pump and Compressor product line is perhaps the most popular ever built. There are 12 different models, from the CL-200 through the CL-14000, with capacities ranging from 150 CFM to over 14,000 CFM. They can be found in many applications including: autoclaves, carburetor testing, chucking, condenser exhausting, container filling, cooking, deaerating, drying, eviscerating, exhausting, extruder venting, fiber setting, filtering, forming, gas stripping, molding, pickup and conveying, priming, slot extraction, and solvent recovery. All CL models are still available from Gardner Denver Nash, the original designer and manufacturer. Whether you have an existing CL pump running in your plant that is in need of service, repair, or replacement with a new or remanufactured duplicate CL pump, Gardner Denver NASH is there for all of the above. Gardner Denver Nash continues to manufacture and offer the CL to our customers.