Results for
NORELEM FRANCE
France
Profile guide rails can be screwed on from above. The profile guide rails are available in four sizes and one or more carriages can be assembled on them. 4row versions with round arch profile. The tracks of the profile guide rails are set below an angle of 45° and thus can carry loads from all directions. The profile guide rails correspond to the market standard and can replace linear guides of the same design by other manufacturers. On request Lengths up to a max. 3960 mm.
Request for a quoteNORELEM FRANCE
France
Body carbon steel. Balls roller bearing steel. Diverters plastic. Standard guide carriage with recirculating ball guidance precision N not preloaded (Z0). With doublesided end seal. 4row versions with round arch profile. The profile guide rail tracks are arranged at 45° and can accept loads from all directions. High dynamic values v = 5 m/s. Applicable temperature in continuous use max. 80 °C. On request Various precision and preload classes. Drawing reference 1) ground ref. edge
Request for a quoteNORELEM FRANCE
France
Electro zincplated. Tracks inductively hardened and ground. Note for ordering Fastening screws are supplied. Note Compact Cprofile guide rails with internal hardened tracks. The system runs with low noise even under heavy loads. There is play between the screw and the fastening hole to allow the rail to be aligned during installation. To achieve the desired running properties there must always be a film of lubricant between track and roller, this also provides corrosion protection for the ground tracks. On request Lengths up to max. 4080 mm.
Request for a quoteD&R RACKING LIMITED
United Kingdom
Used to control forklift truck movement whilst helping to minimize damage to racking.
Request for a quoteFRANKE GMBH
Germany
The stop screws are screwed into the thread (option) of the guide rails. An attached rubber cap dampens the stop. For rail lengths with initial hole dimensions below L11 min. we deliver the drilling pattern offset by half a drilling jump.
Request for a quoteNORELEM FRANCE
France
Housing steel. Clamping lever plastic. Threaded spindle grade 12.9. Version Housing nickelplated. Clamping lever, spindle black oxidised. Note Manually operated clamping elements for static clamping tasks. Manual clamping process using the freely adjustable clamping lever. The floating clamp ensure symmetrical application of force onto the rail. Up to 50,000 static clamping cycles (B10d value). In general, a friction connection is created between the clamping element and the the linear guide on the open faces of the profile guide rail so that the ball guide tracks are not damaged. The retaining force is tested on an oil smeared profile guide rail. An adapter plate, dependent on the type of carriage used, is required for height adjustment.
Request for a quoteSÜTHER & SCHÖN GMBH
Germany
Attachment screws for fastening guide rails forged /galvanized surface quality of material 6.8 Please find results of calculation of stability in our download area:
Request for a quoteSÜTHER & SCHÖN GMBH
Germany
Clamping clips for guide rails acc. to DIN 15313 galvanized surface * not acc. to DIN 15313 Type W (only on inquiry): Please find results of calculation of stability in our download area:
Request for a quoteSÜTHER & SCHÖN GMBH
Germany
Guide rail brackets galvanized Item-no.: FS1 0000 A0 000 000
Request for a quoteSÜTHER & SCHÖN GMBH
Germany
US-type guide rail anchors galvanized surface Please find results of calculation of stability in our download area:
Request for a quoteLÖDIGE INDUSTRIES GMBH
Germany
The storage and retrieval vehicle is used for storing ULDs in racking. Equipped with a lift, the Elevating Transfer Vehicle transports ULDs vertically and horizontally at the same time. It is guided by rails which also supply the power needed. Flow plane: Horizontal and vertical Flow direction: Unidirectional Functions: Transporting, storing and retrieving ULDs Operating modes: Fully automated, semi-automated, maintenance Benefits: Three-dimensional handling Space-saving Minimal adjustments to make onsite A safe way to transport ULDs with care IATA-compliant transportation of ULDs
Request for a quoteROLLON GMBH
Germany
Uniline System is a family of pre-assembled linear units boasting a compact size and high speed ensured by the COMPACT RAIL roller bearings, mounted on a self-sustaining extruded aluminum profile. The linear units are driven by a steel reinforced polyurethane belt system. The horizontal seals and the raceway cleaners fitted on both ends of the carriage ensure full protection from dirt. The linear actuator profile is compatible with an endless number of widely available standard fixing accessories. The motor can be connected to the units by means of a full or a hollow shaft Up to 3,000mm strokes Sizes from 40 x 51.5mm up to 100 x 122.5mm Versions available with long sliders and multiple sliders Using linear rails from the COMPACT RAIL family ensures excellent performance in terms of speed and life. The rails in the linear axes of the four product series are laid out in different combinations to meet all application requirements. Using long or multiple sliders increases the...
Request for a quoteROLLON GMBH
Germany
Light Rail product line includes full or partial extension lightweight telescopic guides. Optional locking mechanism for open or closed positions Various designs, maximum stroke 1,100mm Telescopic extraction up to 105% of the closed slide length The Light Rail product family includes lightweight telescopic rails to be used in environments allowing only reduced weight components. Smooth and quiet operation is ensured even with heavy loads. Elastic shock absorption avoids permanent distortion. The self-cleaning raceways mounted on the Light Rail telescopic rails ensure safe operation and less frequent maintenance. Main fields of application for Light Rail extractable telescopic rails: Food & Beverage Building & Furniture
Request for a quoteROLLON GMBH
Germany
MONO RAIL is a profiled linear rail for high precision under heavy loads. Four rows of balls run in the self-lubricated slider. The running surfaces of the sliders and rails are hardened and polished. Sizes from 15mm to 55mm Standard and flat sliders, with and without flanges Different precision and preload classes Fixing holes from the bottom are available Comprehensive range of accessories, e.g. metal wipers or cover strips MINIATURE MONO RAIL models are mini linear guides with 7mm, 9mm, 12mm and 15mm widths, for particularly noiseless operations. Robust: corrosion and dust resistant Quiet running due to the unique ball channel’s geometric configuration Four-point contacts for equal load capacity in all directions Sliders can be separated from rails without losing balls Long maintenance intervals due to sealed lubrication cycle The MONO RAIL linear guides product family includes profiled linear rails to ensure the highest precision for heavy loads. The availability of sliders...
Request for a quoteROLLON GMBH
Germany
High load capacity and reduced deflection telescopic rails with caged balls bearings. The telescopic guides have optimal running properties due to inductively hardened raceways. TELESCOPIC RAIL linear slides exhibit little deflection while under very heavy loads, even when fully extended. Telescopic guides come in eight different series (DS, DSE, DSC, DE, DBN, DMS, ASN, DRT) Torsionally rigid intermediate elements with S-shaped, double-T, or squared sections Over-extending, full or partial telescopic strokes are available In the DMS63 Series the supported load can reach 2,000kg per pair. Extremely low deflection and smoothness of movement even in high load, 24/7 applications Some Series can be locked in the closed position Special versions and strokes available upon request The Telescopic Rail product family includes full or partial extraction telescopic rails, and consists of eight (8) different sizes. The deflection resistant central components are available in the S, double T...
Request for a quoteROLLON GMBH
Germany
Speedy Rail is the special self-supporting and self-aligning rail in extruded aluminum with a deep hard anodized surface treatment that offers exceptionally high performance and load capacity, with no maintenance and lubrication required, total reliability even in dirty environments with uniquely quiet operation. It is available with v-shaped rollers or cylindrical rollers, both covered in a plastic compound, and can be used as a linear rail or actuator. High reliability up to 80,000 Km Self-supporting for greatest design freedom Self-aligning system Uniquely quiet High technical performance High load capacity of over 3,000 Kg Optimal reliability in dirty environments Absence of lubrication Potentially infinite strokes with jointed versions Ideal for making 2 or 3-axis Cartesian systems for several applications Use as a linear guide or actuator thanks to belt or rack and pinion drives Main fields of application: Self-supporting linear rails for welding machines Self-supporting...
Request for a quoteROLLON GMBH
Germany
Compact Rail is a linear system consisting of steel linear rails with induction hardened raceways and high precision radial ball bearing sliders, also made of hardened steel. Thanks to their self-aligning capabilities, Compact Rail linear guides simplify the project, improve the performance and reduce the overall cost of application. Compact Rail linear guides are easy to install on all types of surfaces, including non-machined ones. Compact Rail linear guides feature a robust steel slider with ball bearings, self-centering heads with wipers, longitudinal seals to protect the internal components and a top sealing strip. The slider body is accurately finished with matte longitudinal edge chamfer and a shining ground flat surface. The slider heads are equipped with special slow release felt pads and are free to rotate with respect to the slider body, so that the felts are always in contact with the raceways to ensure optimal lubrication.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
BEDRUNKA+HIRTH GERÄTEBAU GMBH
Germany
modular workbench: worktop in beech multiplex 1500x750x40 mm, 2x feet, 1x drawer block with 1x drawer, front height 150mm, drawer with full extension 100%, load capacity 100 kg ball guided rails WxDxH 1500x750x859 mm
Request for a quoteBEDRUNKA+HIRTH GERÄTEBAU GMBH
Germany
Drawer cabinet with 8 drawers, 8x 100 mm, drawers with full extension 100%, load capacity 100 kg drawer interior dimension: 600 x 600 mm ball guided rails anti-tilt device, WxDxH 705x736x919 mm
Request for a quoteROLLON GMBH
Germany
The Hegra Rail family includes various telescopic guide profiles with ball cage capable of handling high loads up to 20 kN per pair, overextensions up to 200% of the length of the guide in closed position and available in different materials such as steel, aluminium or stainless steel AISI 304 and AISI 316. The main features of the Hegra Rail telescopic guides: handling of heavy loads combined with minimal bending profiles with 1, 2 or 3 moving elements for extensions up to 200% available in different materials: steel, aluminium, stainless steel AISI 304 and AISI 316 high rigidity and moment of inertia with thin sections fluid noiseless operation long working life extremely reliable The Hegra Rail family of telescopic guides includes five product categories: partial and full extensions, overextensions, heavy loads and S-sections. Telescopic guides for partial extensions,Telescopic guides for full extensions,Telescopic guides for overextensions,Telescopic guides for heavy loads
Request for a quoteBEDRUNKA+HIRTH GERÄTEBAU GMBH
Germany
Drawer cabinet with 5 drawers 2x 100, 2x 150, 1x 200 mm drawers with full extension 100%, load capacity 100 kg drawer interior dimension: 600 x 600 mm ball guided rails anti-tilt device WxDxH 705x736x819 mm
Request for a quoteBEDRUNKA+HIRTH GERÄTEBAU GMBH
Germany
Drawer cabinet with 6 drawers 1x 50, 3x 100, 1x 150, 1x 200 mm drawers with full extension 100% drawers with front height 50 mm - load capacity 70kg drawers with front height 75 mm and more - load capacity 100 kg drawer interior dimension: 600 x 600 mm ball guided rails anti-tilt device WxDxH 705x736x819 mm
Request for a quoteBEDRUNKA+HIRTH GERÄTEBAU GMBH
Germany
Drawer cabinet with 7 drawers 7x 100 mm drawers with full extension 100%, load capacity 100 kg drawer interior dimension: 600 x 600 mm ball guided rails anti-tilt device WxDxH 705x736x819 mm
Request for a quoteBEDRUNKA+HIRTH GERÄTEBAU GMBH
Germany
Drawer cabinet with 6 drawers, 1 x 50, 1 x 100, 3 x 150, 1 x 200 mm drawers with full extension 100% drawers with front height 50 mm - load capacity 70kg drawers with front height 75 mm and more - load capacity 100 kg drawer interior dimension: 600 x 600 mm ball guided rails anti-tilt device WxDxH 705x736x919 mm
Request for a quoteBEDRUNKA+HIRTH GERÄTEBAU GMBH
Germany
Drawer cabinet with 7 drawers 1x75, 2x100,1x 125, 2x150,1x200 mm drawers with full extension 100%, load capacity 100 kg drawer interior dimension: 600 x 600 mm ball guided rails anti-tilt device WxDxH 705x736x1019 mm
Request for a quoteBEDRUNKA+HIRTH GERÄTEBAU GMBH
Germany
Drawer cabinet with 9 drawers 2x 50, 2x 75, 2x 100, 3x 150 mm drawers with full extension 100% drawers with front height 50 mm - load capacity 70kg drawers with front height 75 mm and more - load capacity 100 kg drawer interior dimension: 600 x 600 mm ball guided rails anti-tilt device WxDxH 705x736x1019 mm
Request for a quoteBEDRUNKA+HIRTH GERÄTEBAU GMBH
Germany
Drawer cabinet with 8 drawers front 2x 50, 3x 100, 2x 150, 1x 200 mm drawers with full extension 100% drawers with front height 50 mm - load capacity 70kg drawers with front height 75 mm and more - load capacity 100 kg drawer interior dimension: 900 x 600 mm ball guided rails anti-tilt device WxDxH 1005x736x1019 mm
Request for a quoteBEDRUNKA+HIRTH GERÄTEBAU GMBH
Germany
Drawer cabinet T736 R 36-24 with 7 drawers, 1 x 50, 2 x 100, 3 x 150, 1 x200 mmdrawers with full extension 100% drawers with front height 50 mm - load capacity 70kg drawers with front height 75 mm and more - load capacity 100 kg drawer interior dimension: 900 x 600 mm ball guided rails anti-tilt device, WxDxH 1005x736x1019 mm
Request for a quoteBEDRUNKA+HIRTH GERÄTEBAU GMBH
Germany
Drawer cabinet with 7 drawers 7x 100 mm drawers drawers with full extension 100%, load capacity 100 kg drawer interior dimension: 450 x 600 mm ball guided rails anti-tilt device WxDxH 555x736x819 mm
Request for a quoteResults for
Rail guide - Import exportNumber of results
149 ProductsCountries
Category