Results for
BÜRKLE GMBH
Germany
To make a sampling procedure reproducible, it should always be carried out under the same conditions. For this purpose, the depth stop for samplers is a helpful accessory. The depth stop can be clamped to any height of the sampler by means of a C-clamping screw. This ensures that the sampler penetrates to the same desired depth each time it is pierced. The penetration depth is thus fixed and can be precisely recorded, e.g. in a test report or sampling instructions. In addition, the depth stop can prevent accidental puncturing during sampling. The depth stop for samplers is useful in all areas where the sampling parameters must be precisely determined and defined, e.g. in the outgoing and incoming goods inspection of bulk materials that can segregate. Simply attach the depth stop for samplers to a sampling tube with Ø 25 or 50 mm and tighten with an Allen key (5 mm).
Request for a quoteEASTWEST FRESH SERVICES & LOGISTICS GMBH
Austria
Quality Control
Request for a quoteTPROP CONSULTING
Turkey
If you need any support before and after the manufacturer's contract, we are here. Factory visits, assuring necessary controls, preparation of photographs and visual reports. So that the prior visits are all completed without your presence.
Request for a quoteGRAND GECTOR OÜ
Estonia
While carrying out export operations in other countries, including the EU countries, products must be safe for human health and environmentally friendly. Products falling within the CE marking requirements must be certified by one of the EU accredited laboratories or by an accredited laboratory outside the EU (in any case, test reports must be submitted to one of the EU accredited institutions in order to receive EC certificate of conformity). We cooperate with the leading organizations specialized in certification of products, works and services. We also establish close cooperation with certification organizations of European countries (outside the EEC), African countries, the Near and Middle East countries.
Request for a quotePROEKT INJINIRING, LLC
Russia
A registration certificate is a document that allows you to legally convert a medical device (hereinafter referred to as a medical device, MI) on the territory of the Russian Federation. A registration certificate is issued on the basis of an Order of the registering authority (Federal Service for Supervision in the Field of Healthcare/Roszdravnadzor) after passing all the mandatory stages of state registration, during which the registration dossier is formed
Request for a quotePROEKT INJINIRING, LLC
Russia
A fire certificate is a document issued by a certification body in the field of fire safety confirming that the products comply with the requirements of technical regulations and, if applicable, the requirements of fire safety standards.
Request for a quotePROEKT INJINIRING, LLC
Russia
The Certificate and Declaration of Conformity of the Customs Union is a document confirming compliance with the safety requirements of products subject to the technical regulations of the Customs Union, issued in circulation on the territory of Russia, Belarus, Kazakhstan, Armenia and Kyrgyzstan.
Request for a quoteDELTA GROUP LTD
Russia
When importing products into Russia, you need to comply with a wide range of complex certification systems and national standards. Depending on the nature of the goods you are planning to ship to Russia or to another Commonwealth of Independent States (CIS) country, you may need to gain one or more approvals. We also help exporters and importers of equipment and consumer goods to enter the Russian and European markets through certification against national and international standards. We arrange EAC certificate which is a document attesting that your products conform to the regulations of the Member States of the Eurasian Customs Union and is obligatory for most imported goods, especially cosmetics, foodstuffs, toys, textiles, electrical and industrial equipment. We test, inspect, certify and advise! Certification, EAC certificate, Declarations, EAC certificate, TR CU certificate, Quality Certificate, Certificate of Conformity, Safety Certificate, Customs Certificate, EAC marking,
Request for a quoteEGE TEST EUROPEAN KFT.
Hungary
ECE R10 is a regulation published by The United Nations Economic Commission for Europe (UNECE) for automotive industry. ECE R10 is defining Electromagnetic Compatibility requirements of the vehicles and electronic sub assemblies (ESAs) used in automotive. Do you need ECE R10 testing or ECE R10 Type Approval, Homologation or E-marking? We are offering ECE R10 testing and type approval (E marking) services with our international network of accredited laboratories and designated technical services. Contact Testups, one of our expert engineers will contact you and send a quote specific to your requirements.
Request for a quoteLINGUAVOX SL
Spain
Professional translations by professional translation agency boasting a double quality certification: ISO 9001 and EN 15038. Professional translators across Europe and in over 150 languages: Arabic, German, Bosnian, Bulgarian, Korean, Croatian, Czech, Chinese, Serbian, Danish, Slovak, Slovenian, Spanish, Estonian, Finnish, Flemish, French Canadian and European, Greek, Hungarian, Irish, Italian, Japanese, Latvian, Lithuanian, Maltese, Norwegian, Polish, Brazilian and European Portuguese, Romanian, Russian, Swedish, Turkish, Urdu, Hindi, Basque, Catalan, Galician, Valencian, Vietnamese, etc.
Request for a quoteBÜRKLE GMBH
Germany
Pendulum beaker made of polypropylene with graduation and spout available in three sizes. The beaker automatically swings into the horizontal position. This prevents spillages. Also suitable for deep and narrow shafts (Ø 150 mm). Particularly suitable for sampling from basins, tanks, shafts, open water etc. Sampling depths of up to 6 m can be achieved with the length-adjustable aluminium telescopic rods. The TeleSchöpfer telescopic rod with tools is a versatile sampling system. The interchangeable tools (angle cup, pendulum cup, bottle holder, stainless steel cup and landing net) are suitable for a wide range of applications. The tools are firmly connected to the telescopic rod by a practical snap connection.
Request for a quoteBÜRKLE GMBH
Germany
The sample containers sterile are sterilised by irradiation and correspond to a sterility assurance level Sterile SAL 10-3 (according to ISO 11137) inside. The handy and universally applicable sample jar is easy to fill, smooth-walled and free of undercuts, therefore it can be emptied completely. It is an excellent universal container for all liquid and solid contents. The attached lid of the sample container can be opened with one hand and fixed at a 90° angle. This leaves the other hand free to take samples. Liquid/condensate in the lid runs into a collecting channel integrated in the lid, nothing is lost, nothing can drip off. The sample boxes are closed while hot during production. Due to this process, the sample boxes close absolutely tightly, as the lid and box adapt optimally during the cooling process. The sample container made of PP is highly transparent, the contents of the container can be easily recognised.
Request for a quoteBÜRKLE GMBH
Germany
The ladle is suitable for taking samples of liquids and viscous media as well as powders and granulates. The ladle has a very smooth bottom and rounded corners. This makes it possible to reach into any corner of a container or to take medium directly from the bottom of the container. A long handle with indentations for fingers ensures a firm hold and precise work. The disposable ladle can be used in the pharmaceutical industry, chemistry and cosmetics and the food and animal feed industries. – White, white bio, blue or blue detectable – Disposable, optionally sterilised
Request for a quoteBÜRKLE GMBH
Germany
The angular beaker, available in three different sizes, is particularly flexible and enables precise sampling. The position of the beaker can be set at different angles so that samples can be taken from different depths and surface conditions, even from areas that are difficult to access. The sampler is particularly suitable for taking samples from basins, tanks, shafts, open water etc. Sample depths of up to 6 m can be reached with the length-adjustable aluminium telescopic rods. The TeleSchöpfer telescopic rod with tools is a versatile sampling system. The interchangeable tools (angular beaker, pendulum beaker, bottle holder, stainless steel beaker and landing net) are suitable for a wide range of applications. The tools are firmly connected to the telescopic rod by a practical snap connection.
Request for a quoteBÜRKLE GMBH
Germany
The spoon with curved spoon bowl is suitable for a wide range of different media including powders, granulates, pastes and liquids. The angled spoon shape is also good for reaching into the corners of a container. The long handle of the plastic spoon makes it possible to empty residue from large containers easily and can also reach into places that are hard to reach such as jerrycans with narrow necks. The sampling spoon can be used in pharmaceutical applications, in the chemical industry and for food and cosmetics. – White, white bio, blue or blue detectable – Disposable, optionally sterilised
Request for a quoteBÜRKLE GMBH
Germany
With the bottle holder, the sample can be taken directly into the sample bottle. An easy-to-use clamping strap holds all bottles or other containers up to 88 mm Ø. Plastic, glass or metal bottles can be filled easily and safely without having to decant the sample for transport or storage. The position of the bottle holder can be set at different angles so that samples can be taken from different depths and surface textures, even from areas that are difficult to access. The sampler is particularly suitable for taking samples from basins, tanks, shafts, open bodies of water, etc. Sample depths of up to 6 m can be reached with the length-adjustable aluminium telescopic rods.
Request for a quoteBÜRKLE GMBH
Germany
Sterilisable pendulum beaker made of stainless steel V2A (1.4301) for industry and water treatment. Beaker with scraping edge, capacity 1000 ml. Ideal for powders, granulates, pastes and slurries. Particularly suitable for sampling from basins, tanks, shafts, open water etc. Sample depths of up to 6 m can be reached with the length-adjustable aluminium telescopic rods. The TeleSchöpfer telescopic rod with tools is a versatile sampling system. The interchangeable tools (angle cup, pendulum cup, bottle holder, stainless steel cup and landing net) are suitable for a wide range of applications. The tools are firmly connected to the telescopic rod by a practical snap connection.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
BÜRKLE GMBH
Germany
The surface net with flat net is ideal for sampling and collecting solids and organisms from the water surface. The sampler is particularly suitable for taking samples from basins, tanks, shafts, open waters, etc. Sample depths of up to 6 m can be reached with the length-adjustable aluminium telescopic rods. The TeleSchöpfer telescopic rod with tools is a versatile sampling system. The interchangeable tools (angle cup, pendulum cup, bottle holder, stainless steel cup and landing net) are suitable for a wide range of applications. The tools are firmly connected to the telescopic rod by a practical snap connection.
Request for a quoteBÜRKLE GMBH
Germany
The depth catch net with large net is ideal for sampling solids and organisms below the water surface. The sampler is particularly suitable for sampling from basins, tanks, shafts, open waters, etc. Sample depths of up to 6 m can be reached with the length-adjustable aluminium telescopic rods. The TeleSchöpfer telescopic rod with tools is a versatile sampling system. The interchangeable tools (angle cup, pendulum cup, bottle holder, stainless steel cup and landing net) are suitable for a wide range of applications. The tools are firmly connected to the telescopic rod by a practical snap connection.
Request for a quoteBÜRKLE GMBH
Germany
OTAL pump with disposable delivery tube made of PE, for single use. In OTAL pumps the medium being transferred comes in contact only with delivery tube. There is a danger with reusable pumps that the liquid being transferred will be contaminated by the pump, especially if the pump is used for different media or containers and it´s not properly cleaned before change. A space-saving container pump is specially designed for single use, thereby completely eliminating time-consuming and cost-intensive cleaning as well as contamination. The delivery tube of the liquid transfer pump is made of a single piece and can easily be shortened to the respective container height using the cutter included with delivery. This offers maximum flexibility and guarantees good emptying of small remaining amounts from the container. The discharge of the delivery tube can also be shortened. The disposable pump is ideal when special purity is important or if cleaning is difficult or not possible at all.
Request for a quoteDRESSLER GROUP
Germany
Ensuring that customers always get (at least) what they need is one thing. Another important point is proving compliance with the relevant standards, regulations and certifications. After all, in an age of globalisation, compliance, increasing connectivity and digitalisation, both Dressler Group and its customers must ensure, for their other partners and the responsible authorities, that compliance remains unbroken throughout the supply chain at all times. DG Certifications: ISO 9001:2015 , ISO 50001:2011, GMP, FDA
Request for a quoteBÜRKLE GMBH
Germany
The sample drill for stalk material is a sampler especially for hay, silage, straw, herbs, bushes or other stalky plant dry material where other drills quickly get tangled. The special geometry of the drill tip cuts effectively and quickly into different stalky materials. The hay and silage sample drill takes samples quickly, cleanly and easily from a silo or bale. Sampling with mechanical assistance from a drill or powerful cordless screwdriver allows the sample to be taken effortlessly with little manual effort. The sample drill can be used flexibly both horizontally (sampling from the side) and vertically (sampling from above). The robust and durable tube drill is completely made of stainless steel 1.4404/1.4034 (316L/420) or aluminium/stainless steel 1.4034 (420). The practical ejector helps to empty the sample from the sample drill.
Request for a quoteBÜRKLE GMBH
Germany
The Powder Sampler Mini is a stainless steel sampler for small quantities. When the button is pressed, a sampling rod enters the sample material and retracts when released. In this way, a fixed amount of sample material is enclosed in the sample notch of the rod and removed. The sampler precisely collects 0.01 ml, 0.05 ml and 0.1 ml sample volumes, depending on the version. With an insertion depth of up to 300 mm, multiple target point samples can be collected at different depths. The small-volume powder sampler is made of high-quality stainless steel 1.4404/1.4571 (316L/316Ti). The Mini powder sampler is used for sampling powdery products from small containers, sacks, drums or open containers. Primarily in the pharmaceutical, medical products and biotechnology sectors, e.g. for testing raw materials, active ingredients and excipients.
Request for a quoteBÜRKLE GMBH
Germany
Novartos Uno sampler with two or three sample chambers, for one sample zone. Novartos the Pharma zone sampler for sampling according to FDA guidelines for Unit-Dose-Sampling. It is now possible to withdraw a double- or triple-sample without inserting the lance repeatedly into the bulk material. Mixing is mainly prevented in this way. One significant advantage of Novartos is the easy cleaning. Complete filling and emptying of sample chambers has been improved substantially using computer-optimised geometry. There are no crevices or dead spaces where sampling residues can collect.
Request for a quoteBÜRKLE GMBH
Germany
OTAL® hand pumps with PP delivery tubes, resistant to weak acids, alkalis and detergents. The telescopic immersion tube adapts itself to the container height on insertion. This ensures good removal of residual liquid and means that the hand pump can be used with different containers.
Request for a quoteBÜRKLE GMBH
Germany
The barrel pump driven by rechargeable battery, AccuOne, features a unique new hybrid system with complete flexibility and independence from the electrical network.A powerful light rechargeable battery with the latest next generation lithium-ion technology, without memory effect, with auto-stop function before deep discharge. The new approach to flexibility - One pump with maximum possibilities. Bürkle barrel pumps AccuOne and EnergyOne with the unique hybrid system ensure fast, flexible and convenient filling whenever and wherever you want. The pumps are equipped with two different power supply systems: AccuOne, driven by a high-performance rechargeable battery or EnergyOne, with a power cable for direct connection to the electrical network. The innovative new feature: The power supply units are interchangeable! The rechargeable battery or the power supply unit are fitted with a clip lock and are removable. They can be exchanged quickly and easily. Thus AccuOne can also be...
Request for a quoteBÜRKLE GMBH
Germany
The core sampler can be used to take samples of bulk materials which can easily become stuck or settle during sampling due to their particle form. In comparison to standard all-layer samplers for bulk materials, the two-part core sampler has no gap dimensions in which the medium can become stuck while it is being removed. This makes it possible to take a proper sample of powders and granulates through multiple layers, for example glass balls or metal powders. Depending on the size, the stainless steel sampler can be used for a wide range of different containers, for example big bags or small containers. The bulk material sampler takes a representative core sample and is ideal for use in various laboratory and industrial applications.
Request for a quoteBÜRKLE GMBH
Germany
Pendulum cup made of stainless steel V2A (1.4301) with extra-long, closed handle. The sample cup has no openings or undercuts up to an immersion depth of approx. 500 mm. The closed design of the shaft makes the scoop cup particularly suitable for sampling well water, sludge, waste water, liquid manure or similar. The sampler is particularly suitable for taking samples from basins, tanks, shafts, open bodies of water, etc. With the length-adjustable telescopic aluminium rods, sampling depths of up to 6 m can be achieved. The TeleSchöpfer telescopic rod with tools is a versatile sampling system. The interchangeable tools (angle cup, pendulum cup, bottle holder, stainless steel cup and landing net) are suitable for a wide range of applications. The tools are firmly connected to the telescopic rod by a practical snap connection.
Request for a quoteBÜRKLE GMBH
Germany
Multi sampler with several closed chambers, for multi point sampling from several predetermined sampling depths. Bürkle zone samplers are used for taking samples of bulk goods of any kind. The big advantage of zone samplers is that all-layer samples can be collected from all layers of the container. Various bulk goods can be collected with the lances, from the finest powder to large grains such as corn or nuts. The zone samplers are available in different lengths. 55 cm (only Multi, Uno and All-layer sampler) especially suitable for sacks, 85 cm long (especially for barrels, tubs, mixed containers) and 150 cm as well as 250 cm (only Jumbo sampler) for big bags, silos, tanks. Safe and reliable sampling is made even easier with useful special accessories such as sealing sleeves, Quali-Paper, cleaning brushes, emptying devices and close-it control seals. The zone samplers are available in different models for different sampling tasks.
Request for a quoteResults for
Quality certification - Import exportNumber of results
177 ProductsCountries
Company type
Category