Pvc tapes - Import export

Adhesive tapes of various cutting dimensions and different roll lengths. A wide variety of films are available such as: Self-adhesive PVC tapes: With solvent glue, quiet unrolling. Ideal for difficult packaging in an environment where noise is not allowed and very high adhesion is required. PRINTED FILMS Printed adhesive tapes personalize, advertise and secure your products.

PVC tapes for the protection of joints in electrical wires and cables

Our low-tack fire retardant PVC tape is ideal for joining protection materials such as the Proguard Protection Board. It is especially used where there are sensitive surfaces as the low tack adhesive won't leave a residue. Surfaces must be clean and free from dust for this product to work effectively. It has the additional benefit of being fire resistant and flame retardant to BS EN 60454. Roll size: 50mm x 33m

Underground detectable marking tapes with logo. The marking tapes with logo indicate underground network installations, fiber optics, cables, natural gas, sewerage, etc. There are two different types of marking tapes with logo plein or perforated. There is possibility to print a suitable warning message on all marking tapes.

Tapes for detection and marking of underground installations. The tapes indicate underground network installations fiber optics, cables, natural gas, sewerage, etc. They have built-in stainless steel wire which can be detected from proper equipment and can indicate underground installations. A suitable warning message can be printed on every tape.

It is a non adhesive plasticised PVC tape, without DOP plasticiser. It is available in black. APPLICATIONS Wrapping of automotive electrical wiring harnesses.It is designed for wrapping applications by hand Products designed for applications which require a temperature resistance, class T1 or A (85°C) PRODUCT BENEFITS Harnesses wrapped with it have superior flexibility Good adhesion to itself Unwind force moderate for hand application Good chemical resistance Self-extinguishing on harness Without DOP plasticisers Conform to European Directive 2000/53/EC for End of Vehicle Life (ELV) recycling (does not contain heavy metals) Operating temperature between –40°C to +85°C

It is a 0.13mm premium quality, electrical self‐extinguishing soft PVC tape that uses an aggressive pressure sensitive rubber‐based adhesive system. It has been designed for use where a recognised specification or international standard is required and where environmental safety is a concern. Self-extinguishing soft PVC tape APPLICATIONS Hand application Primary electrical insulation Harnessing Protection for low and medium voltage cable splices Colour coding PRODUCT BENEFITS Good resistance to abrasion, corrosion and moisture High dielectric strength and good mechanical protection Outstanding conformability Tape can be applied at low temperature (till ‐10°C) IMQ and VDE Approval Certificates according to IEC 60454‐3‐1 Conforms to the European Directive 2011/65/EC (RoHS 2) and Commission Delegated Directive (EU) 2015/863 (RoHS 3) Index temperature 0°C to 90°C UL 510A ‐ Recognized Tape

Electrical tapes are used to insulate electrical wires and other materials that conduct electricity. The tape can be used in white goods applications. It is used for coil, capacitor and cable installations. The tape is resistant to UV light, inhibits corrosion of electrical conductors.

Hedgehog fingers/ hedgehog mats/ hedgehog bands are used for safe transport of sensitive and pressure-sensitive fruit as well as vegetables. The hedgehog tapes can even be glued with a PVC carrier tape. Thanks to an approval according to various regulations of the EU, we can offer you a top material with the casting polyurethane Intec E for extreme applications in contact with food. Whether for small quantities from 1 or for large-volume components weighing up to 900 kg, Intec E covers the entire range in hardnesses from 45 Shore A to 93 Shore A. If you need large quantities, we offer food contact approved materials in injection molding with up to 6 kg weight and 1.5 m² area.

Self-adhesive marking tape for temporary identification of objects and surfaces. • Self-adhesive marking tape for indoor use. • Suitable for temporary identification and marking of stationary or mobile objects and surfaces. • The use of rubber adhesive makes the soft PVC tape very conformable. • Easy to apply and remove. • The surface for adhesion must be smooth, solid, clean and free of grease and dust • Tape thickness: 0.16 mm • Width: 50 mm

Waterproof sealing tape for repairing awnings, tents, and truck tarps. It is a 600 micron thick PVC tape with high transparency, which provides high adhesion for a good seal. It is resistant to humidity and water, and provides a 100% hermetic seal. Details: ·Waterproof. ·Good glue under water. ·Resistant to water and humidity. ·High transparency. ·Extra strong adhesion. ·Long-term durability. ·100% sealed Size: 100mm x1.5m

Our single-sided foams provide solutions to practically every industry for sealing of water, air, dust and any other product. They are manufactured in a wide range of colours and thicknesses: 0.8mm – 15mm Hard PVC Medium PVC Soft PVC Available foams: PVC - PE Applications: Draught sealing Protecting Gap-filling Cushioning

Power cable with copper cores, EPR insulation, PVC sheath, shield: copper foil, tape or braids, armour: zinc-coated steel wires, aluminium tapes, zinc-coated steel tapes, aluminium wires.Application: these cables can be used indoor or outdoor, and in the air and in the ground. Fire resistant/flame-retardant/low smoke/low smoke and toxic fumes/cold resistant/shielded/armoured/halogen free)

Power cable with copper cores, PVC insulation, inner PVC covering, PVC sheath, shield: copper foil, tape or braids, armour: zinc-coated steel wires, aluminium tape, zinc-coated steel tapes.Application: PVC -insulated power cables are used for the electricity transmission and distribution in the fixed installations for operating at a nominal alternating voltage of 0,66; 1;3 and 6 kV and nominal freqiency 50Hz. Fire resistant/flame-retardant/low smoke/low smoke and toxic fumes/cold resistant/shielded/armoured

All our transfer self-adhesive tapes meet the requirements of European RoHS and REACH standards. Transfer self-adhesive tapes are available without a carrier or with a textile carrier. We make one-sided self-adhesive tapes in the form of bows, perforated rolls, completely stamped parts or - for easier use - continuously stamped (Kiss-Cut) items. We make double-sided self-adhesive tapes from sponge foam type PU/PE/PVC/EPDM/NBR/EVA in the desired length, width, thickness.

MPD series doors are designed for various industrial and commercial applications. These doors are typically installed as passageways in warehouses, supermarkets and factories to separate premises from temperature changes, humidity, dust, insects, harmful radiation and odors. This is an effective way to insulate the premises without disturbing the movement of people or equipment. The doors are made from a smooth and flexible 7mm PVC tape which is tensile, impact, UV rays and abrasion resistant. Many different frame types are available and can be made out of a special plastic profile or stainless steel.

Superb twisting quality and high speed – these are the hallmarks of the bt 188 T semiautomatic twisting machine. It is also easy to operate, attractively priced and guarantee fantastic performance. When combined with the new optional spot taping unit, the bt 188 T binds both wire ends using cloth or PVC tape. The bt 188 T is capable of twisting two to four wires with excellent results. The parameters can be adjusted as required, which the machine then uses to automatically calculate the required cut length. For example, you can vary the final twisted length, the pitch length, the wire cross section, the outer wire diameter and the open ends. This minimizes the amount of test material consumed when setting up a new product and ensures that everything is ready for production in no time. The intuitive TopTouch user interface makes the system extremely easy to work with. New products can be programmed and existing ones loaded quick and simple. Up to 1200 different articles can be stored.

MORPLASTIK PVC EDGE BAND BAROK WALNUT 290 MT 22 X 0.40 MM

MORPLASTIK PVC EDGE BAND TECHNOLOGY PVC EDGE BAND METALIC KROM 300 MT 22 X 0.40 mm

MORPLASTIK PVC EDGE BAND TECHNOLOGY PVC EDGE BAND EKO WHITE 300 MT 22 X 0.40

It is our pleasure to establish contact with you. On behalf of our team, I would like to express our sincere gratitude for your continuous support and cooperation. We would like to introduce our selves to you that as a specialized manufacturer of rubber products, we are committed to providing high-quality elastomeric rubber sheet and rubber pipe ( with or without alufoil, self adhesive) rubber tapes , pvc and aluminium foil tapes, air ducts, flances, acoustics and gaskets . We serve the ventilation, heating and cooling markets. We are exporting our products 30 different countries and more than 100 customers. We value customer needs and are willing to collaborate with you by offering customized solutions based on your specific requirements. With advanced production equipment and a skilled technical team, we can ensure product quality stability and on-time delivery. Our products strictly comply with international standards and have obtained quality certifications.

PVC coated conveyor belts; These are the belts where you can develop suitable product transport solutions for many sectors. PVC tapes with food compatibility (FDA) certificate are generally used in this sector for carrying packaged products and are preferred in many sectors.