Pure metals - Import export

The grey shiny niobium is not unlike tantalum, which also has a very high melting temperature. A striking difference to tantalum is its much lower density. The pure metal is easy to process due to its low hardness. However, it becomes much harder and more brittle due to minor carbon impurities. Niobium is a relatively base element. When exposed to air, a protective oxide layer forms around the metal, which protects it from further corrosion and provides additional resistance. These wafer-thin oxide layers on the metal surface cause the coloured iridescence that occurs when heating a compact piece with a burner. Niobium powder is pyrophoric and can therefore ignite by itself. Glowing niobium powder reacts with oxygen to form niobium(V)-oxide. The compact metal resists most acids at room temperature. After heating, however, almost all acids are able to decompose the metal.

Gently processed, pure and natural Moringa is one of the healthiest plants on earth and a real powerhouse. It has over 90 nutrients, vitamins, proteins, amino acids, essential micronutrients, antioxidants and much more. Our ginger flavoured moringa tea bags are made from hand-harvested wild moringa leaves. The leaves are gently dried and finely rubbed in a special machine. This gives the tea bags an optimal quality and a unique taste. -Original Ayurveda quality from the tropical Himalayan region. -The tea bags are made of pure cellulose without PVC or metallic staples -100 % vegan -Refined with flavours -Preparation: Put the tea bags in a cup and pour about 1/4 litre of hot water over it. Allow to steep for approx. 5-7 minutes. Also a taste experience unsweetened MoriVeda Moringa Dip Tea GingerGently processed, pure and natural

Moringa is one of the healthiest plants on earth and a real powerhouse. It has over 90 nutrients, vitamins, proteins, amino acids, essential micronutrients, antioxidants and much more. Our pomegranate flavoured moringa tea bags are made from hand-harvested wild moringa leaves. The leaves are gently dried and finely rubbed in a special machine. This gives the tea bags an optimal quality and a unique taste. -Original Ayurveda quality from the tropical Himalayan region. -The tea bags are made of pure cellulose without PVC or metallic staples -100 % vegan -Refined with flavours -Preparation: Put the tea bags in a cup and pour about 1/4 litre of hot water over it. Allow to steep for approx. 5-7 minutes. Also a taste experience unsweetened

Gently processed, pure and natural Moringa is one of the healthiest plants on earth and a real powerhouse. It has over 90 nutrients, vitamins, proteins, amino acids, essential micronutrients, antioxidants and much more. Our apple cinnamon flavoured moringa tea bags are made from hand-harvested wild moringa leaves. The leaves are gently dried and finely rubbed in a special machine. This gives the tea bags an optimal quality and a unique taste. -Original Ayurveda quality from the tropical Himalayan region. -The tea bags are made of pure cellulose without PVC or metallic staples -100 % vegan -Refined with flavours -Preparation: Put the tea bags in a cup and pour about 1/4 litre of hot water over it. Allow to steep for approx. 5-7 minutes. Also a taste experience unsweetened MoriVeda Moringa Dip Tea GingerGently processed, pure and natural

Gently processed, pure and natural Moringa is one of the healthiest plants on earth and a real powerhouse. It has over 90 nutrients, vitamins, proteins, amino acids, essential micronutrients, antioxidants and much more. Our mint flavoured moringa tea bags are made from hand-harvested wild moringa leaves. The leaves are gently dried and finely rubbed in a special machine. This gives the tea bags an optimal quality and a unique taste. -Original Ayurveda quality from the tropical Himalayan region. -The tea bags are made of pure cellulose without PVC or metallic staples -100 % vegan -Refined with flavours -Preparation: Put the tea bags in a cup and pour about 1/4 litre of hot water over it. Allow to steep for approx. 5-7 minutes. Also a taste experience unsweetened MoriVeda Moringa Dip Tea GingerGently processed, pure and natural

Zirconium is a silver-grey, shiny heavy metal. In its pure form it is easy to work, corrosion resistant even at high temperatures and has a very low neutron capture cross section. In addition, zirconium offers good stability against structural damage caused by neutron irradiation and against cavitation by coolant flows. The metal is mainly used pure or alloyed with 1.2-1.7% tin, for corrosion resistant pipes, fittings and valves in the chemical industry. This special alloy is called Zircaloy. Zirconium plays an important role in reactor construction. It is used for fuel element claddings and holders, for the pressure vessel lining, and for all structural components that come into contact with neutrons. In the rocket and jet aircraft industry zirconium is used for the manufacture of combustion chambers and feed lines. In electron and X-ray tubes zirconium is used as getter material.

Formula: He General Description: monoatomic, non-toxic, chemically inert gas, odorless, colorless and tasteless Gas purity and content of its controlled impurities(vol.%, ppmv) Brand 4.0 99,99% Brand 4.5 99,995% Brand 5.0 99,999% Brand 6.0 99,9999% Areas of use: Metallurgy - as an inert shielding gas for smelting pure metals; Welding industry - as an inert medium in arc welding; Food industry - as a packaging gas for food preservation; For gas-filled aircraft and weather probes and balloons in the entertainment industry; Breathing mixtures for deep-sea diving; Advertising - for filling gas discharge tubes; Nuclear power - as a coolant; Gas chromatography; Helium-neon lasers. Brand 4.0 Helium (He) 99.99% Neon Ne ⩽90.0 ppmv Nitrogen N2 ⩽20.0 ppmv Oxygen + Argon O₂+Ar ⩽6.0 ppmv Hydrogen H2 ⩽25.0 ppmv Amount of hydrocarbons ΣCₙHₘ ⩽5.0 ppmv Carbon monoxide + Carbon dioxide CO+CO₂ ⩽10.0 ppmv Moisture H2O ⩽20.0 ppmv

The product is lacquered on pure copper metal. It is produced by hand workmanship. In order for the products to be used for a long time without losing their properties, contact with perfume, water and liquid chemicals should be avoided. All products in this collection have Nickel/Free features. It has anti-allergic properties. Product Size Information: It is suitable for users with a minimum wrist size of 17 cm and above. It can be stretched and adjusted according to the wrist with its open band structure. Width: 1 cm. Weight; 27g. Made in Turkey. It is shipped in a box.

electric motor parts,dc brush motor parts,PMDC brush motor with magnet.motor metal housing,pure bronze wire

Do not miss our special offer - two top quality products, made and tested in Europe, 99% pure NMN, a stimulator of your cell renewal and one of the most potent antioxidants, Trans-Resveratrol, in a Starlife Special Pack! Buy 2-Pack NMN and get Trans-Resveratrol free! One Special Pack package contains a 30 to 60 day supply. Depends on usage. Starlife products are manufactured by a Slovenian pharmaceutical company (EU). They are 99% pure, pharmaceutical grade, heavy metal and microbes tested by the 3th party laboratory in the UK and Europe, without artificial colors, preservatives, or flavors. It is vegan, GMO-free, gluten-free, and soy-free.

AMETEK Specialty Metal Products uses a wrought powder metallurgical process to ensure the highest purity finished products. Our main strengths lie in the processing of Nickel, Iron and Cobalt containing alloys amongst other available materials. The processing of these materials begins with the consolidation of powder through a roll compaction process and followed by a controlled atmosphere sintering. Further reduction of the material is performed solely under cold working temperatures to reduce the introduction of non-metallics and annealing is performed under controlled atmospheres. AMETEK Strip Products are produced in ranges between .002” (0.05mm) and .080” (2.03mm) thicknesses in a full range of tempers and widths to 22” (558.8mm) while maintaining special capabilities to produce materials outside of these ranges for special applications. This process lends itself to the production of small but easily reproducible lots of highly specialized alloys

Soft-Sealing Cutting Rings provide an additional safety and protection against potential leakage risks, e.g. caused by the settling of purely metallic sealed connections, temperature fluctuations or considerable pressure and vibration loads in the system. "Sweating effects" on the connection points can be permanently avoided. The type FI-WDDS Soft-Sealing Cutting Ring of the STAUFF Connect range is characterised by the elastomer sealing, which is located in a specially designed groove close to the rear end of the 24° taper and protected to prevent loss. An additional o-ring is used to secure the secure the second potential leakage path between the cutting ring and the tube – even in the event of unfavourable tolerances FKM/FPM (Viton®) is used as the standard sealing material and enables problem-free use of the system for challenging applications involving high temperatures or aggressive media. Like all other components in the STAUFF Connect product range, the cutting ring...

Electrical Steel: rotor and stator sheets as full service Due to the growing demand for electrical steel, we have bundled our technological resources and expanded the production of pure sheet metal blanks to complete packages in stator and rotor sheets. We are therefore able to provide you, our customers the service of complete sheet metal stacks baked, laser-welded or punched packaged in the electrical steel sector. Due to our extremely thin cutting gap of just 0.07mm - as much as the diameter of a human hair - we are able to produce the smallest contours. The extreme power density at a max. laser power of 1,000 watts enable electrical sheets based on baked varnish technology with the lowest possible edge zone melting - burr-free. Everything 100% "Made in Germany" in packaged quality - usually tolerance class T7. Usual delivery times are approx. one week for cutted sheets, 2-3 weeks for baking or welding parts. Let’s get in contact for your new e-drive, rotor or stator!

Manufacturing plants, machines, technologies and engineering services on PMs metallurgy, casting, pyrometallurgy and physics separation of pure and alloyed Precious Metals.

VSG systems offer a poven and economic solution for the inductive melting of metals or alloys under vacuum or protective gas atmosphere and subsequent casting. Applications: The VSG furnaces can be universally employed for melting and casting under high vacuum or different gas atmospheres in the laboratory or production, e.g. alloying, degassing, purification melting, re-melting processing of noble metals highly pure, highly alloyed steel. • Processing of: ◦noble metals ◦ processing of highly pure, highly alloyed steel ◦ High temperature resistant materials on Fe- Ni- Co- basis ◦ Solar-silicon and other special material ◦ Special- / super alloys

EMTA Conductor & Cable has worldwide experience in rod manufacturing for different standarts and countries. EMTA has produced in excess of 60,000 metric tons of Continuous Cast Aluminum Rod in its own plants in Kadirli. EMTA Aluminum Continuous Casting and Rolling lines are designed to produce pure electrical conductor grade aluminum rod by using A7E (purity of 99,7%) and A8 (purity of 99,8%) and alloy conductor grade aluminum rod coils directly from pure molten metal on a continuous basis. EMTA can produce heat-treatable alloys rod with tempers supplied which from F (as Fabricated) to T4 (Thermally Treated). EMTA manufacturing lines are designed to produce from 9.5 to 15 mm diameter rods in level wound coils and packed in both "Eye to Side" and "Eye to Sky" coils of 2 tons covered with paperboard and plastic shrinkage to be delivered on wooden pallets.

Grinding is an abrasive manufacturing process for processing surfaces with abrasives. The result is metallically pure surfaces free of residues (further processing) and uniform micrographs with high dimensional and shape accuracy and low waviness/roughness. — Lissmac SMW535: max. width 1250mm (grinding, satin finishing and highly decorative processing in one operation) — Kuhlmeyer type ZBS3: max. 4000 x 750 mm — Metallkraft MBSM 2000 ZB: max. 2000 x 750 mm

We are looking for real buyers familiar with the purpose of extra-pure metals. We, as manufacturers of high-purity metals, announce that we can supply the following products: Nickel wire grade DKRNT-0,025-KT-NP (diam. 0.025 mm) Quality: NP2 (99,8 -99,9% Ni), NP1 (99,93 -99,98% Ni), NP0 (99,99 -99,995% Ni) Quantity: up to 500 kg monthly. Price: NP2 (99,8 -99,9% Ni). Price: from 0,85 EUR/meter. NP1 (99,93 -99,98% Ni). Price: from 0,95 EUR/meter. NP0 (99,99 -99,995% Ni). Price: from 1,05 EUR/meter. Minimum order 5000000 meters. We produce tungsten wire in assortment under the buyers order. Prices are on FCA sale condition, factory manufacturer. IASC certificates and other product documents are available on the basis of official requests, LOI + CIS + BCL. We produce all metals from our price list for each customer according to their full requirements and characteristics

We are looking for real buyers familiar with the purpose of extra-pure metals. We, as manufacturers of high-purity metals, announce that we can supply the following products: 1. High purity copper ingots (grades C5N, C6N) Quality: 99.999% Cu of oxygen-free copper. Quantity: up to 50,000 kg monthly. Price FCA: 385 euro/kg. Quality: 99.9999% or more for the requirements of special thermal and electrical conductivity, cryogenic, acoustic and other properties, at a negotiated price. C6N ingots up to 500 kg per month. Price FCA: 3850 euro/kg. 2. Ultrafine copper powder (PMU) of isotopic composition Chemical purity - 99.999%, average particle size 3 - 12 microns on request. Quantity: up to 25 tons monthly. Price FCA: 385 EUR/kg. Chemical purity - 99.9999%, average particle size 3 - 12 microns on request. Quantity: up to 5 tons monthly. Price FCA: 3850 EUR/kg. Prices are on FCA sale condition, factory manufacturer.

We are looking for real buyers familiar with the purpose of extra-pure metals. We, as manufacturers of high-purity metals, announce that we can supply the following products: High quality aluminum brand A99, A4N6 in bars Quality: not less than 99.996 - 99,998 % Al. Quantity: from 20-60 tons monthly. Price: 35 EUR/kg. High purity aluminum ingots (grades A5N, A5N5, A6N) Quality: High purity aluminum ingots grades A5N Chemical purity: 99.999%. Quantity: up to 5000 kg monthly. Price: 300 EUR/kg. Quality: High purity aluminum ingots grades A6N Chemical purity: 99.9999%. Quantity: up to 1000 kg monthly. Price: 385 EUR/kg. Prices are on FCA sale condition, factory manufacturer. IASC certificates and other product documents are available on the basis of official requests, LOI + CIS + BCL. We produce all metals from our price list for each customer according to their full requirements and characteristic.

100g high purity Gallium Metal 99.999% purity This very rare metal is mainly used for semiconductors and other scientifical applications.Due to its very low melting point its easy to melt and grow fantastic crystals! On long term prices will rise due to high demand! Gallium melts in your hand! Grow fantastic & large metal crystals