Results for
OMAC SRL
Italy
C and CF series are new range of sanitaryhygienic pumps to satisfy the high standard required for food and pharmaceutical industry applications. Designed to attain the highest hygienic standard, the lobe pumps are easily fully cleanable as to enable hot water consumption and reduce the use of chemical products for their cleaning. The materials used, surface finishing and all the characteristics of the design have enabled to get the European Hygienic Engineering & Design Group EHEDG and 3A certification. C series incorporate new front loading seals design for easier and quick servicing. In addition, maintenance is also simplified by a new external axial adjustment system. All the parts that come into contact with the product are made in stainless steel 1.4404, pump body is cast with integral connections without welding.
Request for a quoteARSILAC
France
Electronic variable speed drive Reversing switch Pressure relief valve Threephase 400 V On trolley
Request for a quoteARSILAC
France
Electronic speed controller Reversing switch Threephase 400 V On trolley With bypass
Request for a quoteSEMIN
France
TECHNICAL DEFINITION Levelling filler for vertical substrates and for use on ceilings for poured concrete or pre-cast slabs. Ideal for the preparation of pre-cast slabs, formwork concrete and for the renovation of textured finishes or fibreglass with a paint finish. TECHNICAL CHARACTERISTICS • Dry extract : 75% • Density : 1.86 • VOC content : less than 1g/l COMPOSITION AND APPEARANCE Water, calcium carbonate, dispersant, bactericide, fungicide, cellulosic fibres, polyacrylates, clays, acrylic dispersant. AMOUNT REQUIRED From 2 to 4 kg for the first coat. From 1.5 to 2 kg for the second coat. APPLICATION SEMIN AIRLESS EXTREM filler is sprayed using the Airless pump or rotor machine/Flat spray stator in 2 coats. The first coat must be levelled using a 60 cm blade or levelled with a straight edge. After drying, the second coat must be smoothed using a blade.
Request for a quoteFLUX-GERÄTE GMBH
Germany
Pump F 430 PP 100/50 in polypropylene was designed for higher delivery pressure. Instead of a rotor, it is equipped with an impeller in a pump housing. In connection with the powerful FLUX motors the pump delivers a far higher pressure of over 3 bar compared to pumps with semi-axial rotors. This makes it especially convenient for conveying media out of e.g. IBCs and other containers into higher lying pipe systems or out of an IBC in the basement to a higher floor. Benefits: - The pump has a significantly higher delivery head in the range up to 40 l/min compared to pumps with half-axial rotor (Z-rotor) - Allows the conveying of media out of an IBC stock in the basement into higher floors - Ideal for pumping media into a higher lying pipe system - Can be used as a supply pump of line networks e.g. for feeding of process water
Request for a quoteNINGBO FRIMA INDUSTRY CO. LTD.
China
CNC Metal Shaft Motor shaft, Fan shaft, Precision shaft, Micro Shaft, Rotor shaft, Pump shaft, Pins, Hinge pin, Metal part, Mechanical precision part. Mechanical precision part/Mechanical precision part. 1) Material: Carbon steel, Stainless steel, brass or as per customer’s requirements. 2) Roundness: 0.001mm 3) Roughness: Ra0.04 4) Straightness: 0.001mm 5) Length: Max. 1000mm 6) Heat treatment: Point hardening, quenching hardening 7) Surface treatment: Zinc plating, nigrescence, chrome plating, nickel plating etc. 8) OEM Service: Providing us the drawing with detail information. 9) Offering products with speciality, quality and efficiency. 10) Package: Plastic bag inside and outer standard carton, pallet. According to client’s demand. Specifications for CNC METAL SHAFT
Request for a quoteOMAC SRL
Italy
The BE series pumps are simple and robust and are characterised by their monoblock design. The drive unit, thanks to the hallow shaft and to the rear cover provided with an IEC flange, is directly fixed to the pump by creating a unique compact and light body. The new design, with smooth cover and fixing nut built in the rotors, improves the cleaning standard. The lobe pumps of this series are provided only with bilobe rotary piston rotors in S.S. 316 L or in antifriction alloy CY5SnBiM, which ensure an excellent volumetric efficiency and a smooth and regular transfer of several liquid or viscous products. In less demanding works, the BE pumps can replace the B pumps and, meeting the increasing demand of cheap lobe pumps with good sanitary standard, allow to widen the utilization possibilities of the OMAC lobe pumps.
Request for a quoteOMAC SRL
Italy
Developed from the successful existing range of OMAC “B” series pumps, the new series “BF” pumps retain the principles of performance, solidity and reliability and incorporate a new design which enables easier cleaning of the externals and AISI 304 gearbox. All product wetted parts are in AISI 316L with ferrite content of less than 3%. The cover is smooth with a new gasket and the rotors offer the option of either in built fixing nuts or external fixing without nuts for F series. The pump body is pressforged and has integral non welded Tri clamp or DIN118643 connections. Elimination of slots ensures easy C.I.P. cleaning with no cleaning fluid retention. F series (without nuts on rotors) has obtained, after Cleanability Tests at München Engineering University, EHEDG’S certification (European Hygienic Engineering & Design Group) show that this kind of pump meets all requirement for hygienic design and is to be classified as “easy cleanable”.
Request for a quoteOMAC SRL
Italy
Developed from the successful existing range of OMAC “B” series pumps, the series “BBBA” pumps retain the principles of performance, solidity and reliability and incorporate a new design which enables easier cleaning of the wetted parts. BA series has obtained 3A Sanitary Standard certification. Several innovative OMAC features from BFF series have been incorporated within the product. BB pumps have design according 3A Sanitary Standard (new standard Number 0210). BA pumps have design, surface finish & elastomers in either 3A – FDA approved and are delivered with 3A nameplate and certificate. Difference between classic B series and BB/BA are Rotor case profile and geometry allows for complete self draining of the pump with vertical ports In built fixing nuts with flat cover minimises product entrapment & improves CIP Flush end cover Oring that follows rotor case profile
Request for a quoteHEMOGUM
Serbia
Are you planning to have chemicaly resistant protection of tanks for a plant or a construction? Or would you like to improve the existing protection measures? You can contact Hemogum to manually restore worn-out pipelines with rubber coating, tanks, rotors and pump stators that will thus be protected against aggressive substances. We make rubber foils as protection coating for industrial vessels and tanks as anti-corrosion protection from aggressive fluids and wear particles. Quality, hardness and thickness of the foil is determined by the chemical composure of the working media, size of particles, concentration, temperature and flow rate.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
LEISTRITZ PUMPEN GMBH
Germany
In petrochemical and chemical process engineering, screw pumps, acting as displacement pumps, offer hydraulic characteristics which make them indispensable for the entire viscosity range. In chemical applications in particular, the high suction force and the gentle handling of the fluids to be pumped are the outstanding features of this type of pump. In general, all of our pumps can be used in this field, but the most common one is the two-rotor pump. Leistritz screw pumps are used to pump clean or slightly abrasive, low and high viscosity fluids with lubricity from poor to good, such as: additives, bitumen, resins, crude oil, greases, benzenes, adhesives, silicates, isocyanates, tar, polyols, asphalt, paints/varnishes, paraffin, polymers, and various other chemical products.
Request for a quoteVILLINA LLC
Russia
Villina-VS1-М, Villina-GNVC-K and Villina-GNGC-K type centrifugal canned pump units with combined seals are widely used in modern gas industries, petrochemical and petroleum refining industries. They are designed for transiting neutral, corrosive, toxic, as well as explosive and flammable liquids in stationary conditions, the vapors of which can form explosive mixtures with air. For such conditions, mechanical seals with operating temperatures up to 425°C of well-known companies are used, such as: OOO NPC ANOD, JSC TREM ENGINEERING, UNICHIMTEK Group of Companies and others, as well as permanent magnets (SmCo) with operating temperatures up to 450°C. Villina type units are made in three versions as regards the spatial location of the pump rotor: vertical ground-level (Villina-VS1-M) - the pumped liquid is supplied to the pump part of the unit through a suction pipe located radially to the pump rotor. The unit consists of a pump part, a device
Request for a quoteCIMAT
Poland
At CIMAT, we offer conventional horizontal balancing machines on a bed for rotors of pumps of different size. The greatest advantage of these machines is their versatile application. Main features universally applicable, custom design for every customer, permanent calibration and rotor specific calibration as standard, intuitive and easy to operate software, latest measuring and control unit ROTORTEST based on microprocessor technology, different correction methods are supported milling, drilling, grinding, punching, welding, adding balancing weights, safety guarding standard ISO 21940232012 (old ISO 7475 and DIN 45690) compliant.
Request for a quoteCIMAT
Poland
Automatic balancers manufactured by CIMAT can balance many types of rotor, including discshaped rotors, brake discs, clutches, pulleys and rotors with journals, electric armatures, rotors of mechanical compressors, turbocharger rotors, pump rotors, rotors designed for the railway industry, others.
Request for a quoteDORU MAKINA VE DIS TICARET
Turkey
POWER SD 5 READY PLASTERING MACHINE Technical Specifications Machine Type: POWER SD 5 High quality mixing Easily disassembled and transported High quality electrical panel application 2 years warranty period – Delivery export value package type. Technical Data Power Supply 380 V - 50 Hz Motor Power 5.5 kW Compressor Capacity 250 liters/min - 5.5 bar Carrying Capacity * 5-40 liters/min (These values may vary depending on the material used, the pumping height, the consistency of the pumped material, the type of pump, rotor and stator.) Water pump 50 liters/min - 0.75kW Transport Distance Horizontal * 40 meters (Standard – if needed this will be long - option) Transport Distance Vertical * 30 meters (Standard – if needed this will be long - option) Reservoir Volume 130 liters Maximum Weight 285 kg
Request for a quoteOFFICINE CONTERNO SRL
Italy
Suitable for the recovery, compaction and drying of sand from aggregate washing. Our cyclonic separation units are extremely high-performing and efficient thanks to the latest generation of pumps and rotors made of wear-resistant material. The system is composed of the water + sand receiving tank, suction head or immersion booster pump, hydrocyclone for sand compaction and vibro-dryer for drainage and drying. Available in various ranges according to the flow to be achieved.
Request for a quoteMETALOCK INTERNATIONAL ASSOCIATION LTD
United Kingdom
The repair of cracked or fractured power equipment; turbine casings, rotors, pumps, gearboxes, foundations, etc. The cold repair, in-situ, of any type of fractured equipment. Working with power equipment since 1949.
Request for a quoteResults for
Pump rotors - Import exportNumber of results
25 ProductsCountries
Category