Pump housing - Import export

The refurbishment of pump housings is an cost-effective alternative to new purchases. With our hard-facing alloys we can protect the inner contours against abbrasive wear.

Pump Housing

We focus on quality and consistency. Batch production are always consistent with sample. Our Quality assurance: 1. Non-destructive test (NDT): magnetic particle examination (MPE), ultrasonic examination (UE), liquid penetration examination (LPE), X ray. 2. Experienced inspector on dimensions, CMM dimension testing and other tools. 3. To maintain our reputation, we still have excellent return and claim policy even some rare defects. 4. Our prices are always competitive. 5. Spectrometers to assure the material.

Material: ASTM, JIS, DIN, BS, such as 65-45-12 Casting part and machined part We focus on quality and consistency. Batch production are always consistent with sample. Our Quality assurance: 1. Non-destructive test (NDT): magnetic particle examination (MPE), ultrasonic examination (UE), liquid penetration examination (LPE), X ray. 2. Experienced inspector on dimensions, CMM dimension testing and other tools. 3. To maintain our reputation, we still have excellent return and claim policy even some rare defects. 4. Our prices are always competitive. 5. Spectrometers to assure the material.

Depending on the pump housing, the diaphragm pumps operated by compressed air can be offered in metal or plastic. Air operated diaphragm pumps made of plastic The double diaphragm pumps made of plastic have a pump housing made of polyethylene or PTFE, each also in a conductive version as an ATEX pump for use in hazardous areas. The compressed air diaphragm pumps in solid construction made of polyethylene can be used for abrasive, viscous and shear sensitive media. Air operated diaphragm pumps made of metal The metal pumps have a pump housing made of aluminum, cast iron or stainless steel. All pumps are available with composite membranes made of PTFE, EPDM or NBR. The material of the valves and seals is coordinated according to the choice of membrane.

Pump F 430 PP 100/50 in polypropylene was designed for higher delivery pressure. Instead of a rotor, it is equipped with an impeller in a pump housing. In connection with the powerful FLUX motors the pump delivers a far higher pressure of over 3 bar compared to pumps with semi-axial rotors. This makes it especially convenient for conveying media out of e.g. IBCs and other containers into higher lying pipe systems or out of an IBC in the basement to a higher floor. Benefits: - The pump has a significantly higher delivery head in the range up to 40 l/min compared to pumps with half-axial rotor (Z-rotor) - Allows the conveying of media out of an IBC stock in the basement into higher floors - Ideal for pumping media into a higher lying pipe system - Can be used as a supply pump of line networks e.g. for feeding of process water

Material : standard ASTM, JIS, DIN, BS 1. Non-destructive test (NDT): magnetic particle examination (MPE), ultrasonic examination (UE), liquid penetration examination (LPE), X ray. 2. Experienced inspector on dimensions, CMM dimension testing and other tools. 3. To maintain our reputation, we still have excellent return and claim policy even some rare defects. 4. Our prices are always competitive. 5. Spectrometers to assure the material.

Practical examples of repairs with WEICON products, e.g. Renewal of a machine tool bed Repair of the fan housing of a ventilator Fixing of a logo on a sign Repair of a drive shaft Coating of a pump housing Manufacture of axle collars Installation of an abrasion protection made of ceramics in pipe connections Repair of conveyor belts in a quartz sand works Bonding of wheel tyre and gear wheel in a gravel plant Repair of agitators Repair of the end cover of a seawater filter on a yacht Relining of a machine/robot stand base Bonding of polyethylene strips to aluminium rails Internal thread bonding of a jackhammer Bonding of stoneware sewage shafts with plastic channels Repair of a pump bucket wheel Repair of the foundations of a conveyor system in a copper mine Bonding of the radiator of an electric racing car Repair of a polyethylene tank in agriculture Repair and reconstruction of pumps Repair of ships / keels

Suitable for neutral and aggressive liquids as well as liquids containing solids Application: Centrifugal pump for dry-well installation featuring a bearing-less cantilever design with direct-coupled IEC motor. Specially designed for plant engineering and confined spaces. The B80 HME Series can be operated beside the container in a dry-well installation. Liquid flowing up inside the shaft guide tube returns to the container via an overflow line. Pumps in dry-well installations allow an easier access to carry out maintenance and repair work. Features: Directly-coupled in bearing-less cantilever design Radial and axial fixed drive elements in two-piece bearing shell Pump housing in glass-fibre or carbon-fibre reinforced plastic (PP or PVDF) Gas seal for protecting the motor bearing Plastic-coated drive shaft Driven by IEC standardised motors Benefits: Compact dimensions Service-friendly dry-well installation Self-centring alignment in the bearing shell Vibration-free and...

Our hero made of stainless steel for self-pumped waterNone of our high-quality submerged waste water pumps of the TWP series transports more water per hour. With its resistant pump housing, the submerged pump TWP 11000 ES made of stainless steel withstands even the most extreme weather conditions. The solid submerged pump guarantees an above-average and at the same time maintenance-free service life for water withdrawal from ponds, garden wells, cisterns or rain barrels as well as for pumping out and recirculating water in swimming pools and whirlpools, flooded basements, garages and building/drainage pits. This high degree of versatility makes the TWP 11000 ES an indispensable universal helper for passionate hobby gardeners, facility managers, homeowners or craftsmen.

Brilliant prospects for self-pumped waterBeing made of stainless steel, the submerged waste water pump TWP 9000 ES is extremely resistant to extreme weather conditions and corrosion. The equally high-quality and robust material of the pump housing guarantees a long, low-maintenance service life for withdrawing water from garden ponds, wells, cisterns or rain barrels as well as for pumping out and recirculating water in swimming pools, flooded basements, garages and building pits. TWP 9000 ES: powerful helper for house, garden and business Due to its solid construction and the safe IPX8 type of protection, the submerged pump reliably withstands even the toughest working conditions in continuous operation.

ASCO CO2 Transfer Pumps have steel housings and long life shaft seals. The pumps have hardened steel gears and thrust washers to give long service life. The mechanical seal fitted provides leak free operation. These economical pumps need no lubrication and no daytoday maintenance. A unique design allows parts to adjust automatically for wear. Highest efficiency is maintained for a very long time. Installation is simple as no chain or belt drives or gear reduction motors are required. Pumps can be directly connected to standard speed lowcost electric motors. By simply changing the shaft rotation, pumps can be used to pump in or out through the same piping.

Stainless Steel, also available in non corrosive plastic housing, Inverter heat pumps are equipped with variable speed compressors, depending on the energy demand and the surroundings conditions, higher efficiencies at much lower sound pressures, 65% higher C.O.P as for common on and off heat pump, Modbus capable, touch control with integrated WLAN connection for control via mobile device, titan heat exchanger, R32 defrosting liquid

2-spindle solution with 4 parts clamping Processing in one setup Machining time less than 82s per workpiece Machining with 4 spindles Tool monitoring for all tools takes place parallel to production time

Aldea BlueRain ALD-EAMB50 Series Commercial EVI Compressor Heat Pump , which works stably even at extra low temperatures such as -25°C, Hydrophilic Aluminum Fin Evaporator “S” shaped hydrophilic fins arranged in rows expand the transfer surface by 30% to provide highly efficient heat transfer. Copeland Compressor It is a high performance, well-known international compressor. It is resistant to high temperature and high pressure. It is long lasting. Offers Large-Scale Heating and Cooling Solution BlueRain Series Commercial EVI Compressor Heat Pump; It continues to operate stably at extra-low outdoor temperatures such as -25°C.

Aldea BlueRain ALD-EAMB35 Series Commercial EVI Compressor Heat Pump , which works stably even at extra low temperatures such as -25°C, Hydrophilic Aluminum Fin Evaporator “S” shaped hydrophilic fins arranged in rows expand the transfer surface by 30% to provide highly efficient heat transfer. Copeland Compressor It is a high performance, well-known international compressor. It is resistant to high temperature and high pressure. It is long lasting. Offers Large-Scale Heating and Cooling Solution BlueRain Series Commercial EVI Compressor Heat Pump; It continues to operate stably at extra-low outdoor temperatures such as -25°C. Concealed Ceiling Type Fancoil; It is used for space cooling in summer. Floor Type Fan Coil; It heats the space by blowing close to the floor during the heating season.

Aldea BlueRain ALD-EAMB275 Series Commercial EVI Compressor Heat Pump , which works stably even at extra low temperatures such as -25°C, Hydrophilic Aluminum Fin Evaporator “S” shaped hydrophilic fins arranged in rows expand the transfer surface by 30% to provide highly efficient heat transfer. Copeland Compressor It is a high performance, well-known international compressor. It is resistant to high temperature and high pressure. It is long lasting. Offers Large-Scale Heating and Cooling Solution BlueRain Series Commercial EVI Compressor Heat Pump; It continues to operate stably at extra-low outdoor temperatures such as -25°C. Concealed Ceiling Type Fancoil; It is used for space cooling in summer.

Aldea BlueRain ALD-EAMB200 Series Commercial EVI Compressor Heat Pump , which works stably even at extra low temperatures such as -25°C, Hydrophilic Aluminum Fin Evaporator “S” shaped hydrophilic fins arranged in rows expand the transfer surface by 30% to provide highly efficient heat transfer. Copeland Compressor It is a high performance, well-known international compressor. It is resistant to high temperature and high pressure. It is long lasting. Offers Large-Scale Heating and Cooling Solution BlueRain Series Commercial EVI Compressor Heat Pump; It continues to operate stably at extra-low outdoor temperatures such as -25°C. Concealed Ceiling Type Fancoil; It is used for space cooling in summer. Floor Type Fan Coil; It heats the space by blowing close to the floor during the heating season.

Aldea BlueRain ALD-EAMB100 Series Commercial EVI Compressor Heat Pump , which works stably even at extra low temperatures such as -25°C, Hydrophilic Aluminum Fin Evaporator “S” shaped hydrophilic fins arranged in rows expand the transfer surface by 30% to provide highly efficient heat transfer. Copeland Compressor It is a high performance, well-known international compressor. It is resistant to high temperature and high pressure. It is long lasting. Offers Large-Scale Heating and Cooling Solution BlueRain Series Commercial EVI Compressor Heat Pump; It continues to operate stably at extra-low outdoor temperatures such as -25°C.

Inoxyda's experience in alumium bronze alloys used in sand casting enables to deliver world wide large size castings for pump applications. Casings, discharge elbows, impellers, what ever your need, we can cast to 15 To. Parts are delivered as cast, rough or fully machined according to international quality standards. Technical support can include simulation with Magma soft, pattern making (including 3D sand printing technology), ITP (Inspection test plans), 3rd party inspections and worldwide deliveries.

The Solvent Sprayer is designed specifically for the spraying of solvents. Solvent resistant polyamide pump housing and resistant FKM seals. The graduations provide a clear visualization of the product level. The reinforced base ensures perfect stability. With multi directional and adjustable nozzle from mist to straight jet.

The 300 Series Powders are austenitic stainless steels typically used for powdered metallurgy (P/M) press and sinter applications to make near net shape parts for a variety of industrial applications. Stainless steel powder 303L is a free machining, austenitic grade that offers moderate corrosion resistance. This stainless steel is sintered in either a partial vacuum or a hydrogren atmosphere to improve ductility and corrosion resistance. 303 Stainless steel powder is a sulfurized grade that is an excellent option for parts that require secondary machining operations, such as food service equipment, pump components and nonmagnetic housings.

EN 1561 / Gray (Flake Graphite): EN GJL 100, EN GJL 150, EN GJL 200, EN GJL 250, EN GJL 300, EN GJL 350 EN 1563 / Nodular (Spheroidal, Ductile): EN GJS 350 22, EN GJS 350 22 LT, EN GJS 400 15U<30mm, EN GJS 400 18, EN GJS 400 18 LT, EN GJS 400 18U, EN GJS 450 10,EN GJS 500 7, EN GJS 600 3, EN GJS 700 2 as cast & normalized, EN GJS 700 2 hardened & tempered, EN GJS 800 2 as cast & normalized, EN GJS 800 2 hardened & tempered, EN GJS 900 2 as cast & normalized, EN GJS 900 2 hardened & tempered EN 1562 Malleable : Blackheart, Pearlitic, Whiteheart ALLOY CAST IRONS Austenitic :Flake Graphite , Nodular Graphite High Silicon White Cast Iron :High Chromium, Low alloy, Nickel-Chromium CARBON STEELS Low Carbon Steels Medium and High Carbon Steels ALLOY STEELS High, Medium and Low Alloy Steels STAINLESS STEELS Ferritic, Martensitic, Austenitic, Duplex, Precipitation Hardened

Vacuum Filter VF Connect. G3/8 ... G21/2 Vacuum filter with sheet metal housing for vacuum pumps and smaller blowers

Universal ePTFE Gasket Tape HD with higher density Characteristics Very adaptive to surfaces Chemical resistance Simple to install Very high cross section sealability Wide area of applications Does not stick on flanges Easy to remove Universal sizes reduce stock keeping Material 100 % expanded PTFE Chemical resistant against all products with the exception of molten Alcalimetal and elementary Fluor Main application Pipe Columns Separation joints Mixer Pump Housing Machine Housing Glass- and Graphite-Devices Lined vessels Sight glasses Hand- and Manhole covers (Not TRD401) Ventilation and Air Condition Channels Steel and Plastic flanges Pipes and devices with highly aggressive chemicals Gearboxes Suitable for Pharma industry Food industry Approvals FDA21 CFR 177.1550 (PTFE), FDA21 CFR 170.105 (adhesive) EG 1935:2004 EU 10/2011 FDA Dimensions Dimension (mm) Gasket spool 10 m Gasket spool 25 m Gasket spool 50 m Seal area width 3 x 0.3 x x >3 mm 3 x 0.7 x x >3 mm 4 x 1.5 x x >15 mm

High temperatur sheet gasket from expanded graphite with stainless steel foil reinforcement Characteristics One layer of 0.05 mm stainless steel carrier (3 mm thickness 2 layers) with graphite on both sides fixed by a special only 10 µm thick adhesive coating. Purity 98 % Practically no cold flow or creep under temperature Excellent in use at cycling temperatures Very good sealability even at low gasket stress. Technical parameters pH 0 - 14 Temperature: t = -250 … +550 °C, in oxidizing atmosphere 450 °C Pressure: p = 40 bar Main application Suitable for sensitive flange connections Housings of pumps and fittings Suitable for In all industries Approvals BAM DVGW Variant Economic grade alternative D 5.2 with 0.05 mm stainless steel foil reinforcement Form of delivery Gasket sheet size of 1,000 x 1,000 mm in der Dicke 0.55 / 0.75 / 1.0 / 1.5 / 2.0 / 3.0 mm or cut gaskets according to drawing, or EN and international Standards. Special dimensions on request.

Eisele rotary lobe pumps have been constructed since 1983 and have proved themselves in the agricultural and industrial sectors. Detailed key data here: Rotary lube pump (rotary piston pump) for pumping media up to approx. 30% TS Rotary lobe with metal core and perbunan coating Drive with PTO shaft or electric motor (7.5 / 11.0 / 15.0 / 18.5 / 22.0 kW) Pumping capacity from min. 450 l/min. to 6,000 l/min (depending on the media) Pressure performance 4 - 10 bar The rotary lobes can be changed quicker and easier by opening the four ring nuts of the cover, easy as one-man operation. Vacuum and pressure side can be freely selected by re-plugging the drive shaft Standard with front side-wear plates in the pump housing and cover Mobile pump stations with one or two rotary lube pumps (pumping capacity up to 7,400 l/min.) Eisele rotary lube pumps have proved themselves in the agricultural and industrial sectors. A continuous further development guarantees a high technical standard....

Main products: pump housing, shaft, liner, wearing ring, colomn pipe, sealing ring, cover, pump impeller, PELTON runner, FRANCIS runner, KAPLAN runner, pump casing... Alloys: - bronze and brass - low allied and pure copper - aluminium bronze - aluminium - stainless steel - Ni-based and special alloys