Protects against dirt - Import export

Suitable for transparent, universal impregnation for protecting against moss, algae and lichens. This inhibits the entry of dirt, oils and grease. Terrace and Gravestone Impregnation can be used on absorbent, mineral substrates such as exposed aggregate concrete, terracotta, natural ans artificial stone, granite, brick walls, hard rock, stone stairs and gravestones.

This protective pouch is air and watertight. Data loggers are thus protected from moisture and dirt. It is not recommended to put data loggers in here that need to measure humidity.

Velorest Chain Wax is a 100% biodegradable chain wax, designed to protect your chain and extend its life. During application, the wax penetrates deep into the links and provides a water and dirt-repellent protective layer. The Velorest Chain Wax comes into its own in dry conditions, but it can also work in wet and cold conditions

Velorest Chain Wax is a 100% plant-based chain wax designed to protect a chain and extend its lifespan. When applied, the wax penetrates deeply into the links and creates a water and dirt-repellent protective layer. Velorest Chain Wax performs best in dry conditions but also works in wet and cold conditions!

Uniline System is a family of pre-assembled linear units boasting a compact size and high speed ensured by the COMPACT RAIL roller bearings, mounted on a self-sustaining extruded aluminum profile. The linear units are driven by a steel reinforced polyurethane belt system. The horizontal seals and the raceway cleaners fitted on both ends of the carriage ensure full protection from dirt. The linear actuator profile is compatible with an endless number of widely available standard fixing accessories. The motor can be connected to the units by means of a full or a hollow shaft Up to 3,000mm strokes Sizes from 40 x 51.5mm up to 100 x 122.5mm Versions available with long sliders and multiple sliders Using linear rails from the COMPACT RAIL family ensures excellent performance in terms of speed and life. The rails in the linear axes of the four product series are laid out in different combinations to meet all application requirements. Using long or multiple sliders increases the...

A high number of companies and brands rely on our bags for textiles. First class raw materials and a proper finish of our bags give a superb presentation of your products. Your high-valued goods are perfectly protected. They are available out of high transparent and high glossy OPP (optionally available with reduced slippery effect), optionally special “Shirt OPP” with highest possible seam strength available transparent and glossy CPP = PPCast LDPE, MDPE + HDPE For lying and standing presentation, our flat bags as well as bottomfold bags are ideal solutions and a protection against dirt, dust and weather influences. For hanging presentation, our hook bags are ideal. The hooks are connected with the bag by stable seams. They are available with filling from above and below. The hooks are available in different executions. For hanging presentation you may also use our stand bags / header bags. For the protection of big hanging clothes, we deliver tubular dress protection covers,...

The rugged tags (data carriers) with high protection class are insensitive to dirt and liquids and are available with a max. memory size of 8 kB. They are passively powered via the read/write head and are maintenance free. Tags for high temperatures and direct mounting on metal allow flexible use under extreme conditions. Tags for use in hazardous areas and autoclavs complete the product portfolio.

The flat bag is the universal type for most kinds of use. You can obtain the flat bag in various designs, in your required sizes and foil thicknesses. First class raw materials and a proper finish lead to a perfect presentation of your products. Your products are protected against dust, dirt and weather influences. Materials high transparent and glossy OPP metallized OPP transparent and glossy CPP (PPCast) transparent or coloured LDPE, MDPE and HPDE laminates in different compositions (also combined with pure aluminium) Our flat bags are available in sizes, material and material thickness according to your specifications with or without flap (also angle-cut) with or without adhesive glue strip with or without eurohole lso with punch-out for wire-o also in blocked execution with tear-off perforation with or without printing (flexo or gravure printing up to 10 colours)

Safe energy and data transmission The igus® Chainflex® cable range offers a choice of over 850 different cables, available from stock. A main focus of the range are the data and bus cables. Solutions based on copper, glass or plastic fiber optic cables are provided for almost all bus systems in industrial use. We continue to provide you with all supply cables for your drive systems such as motor cables with and without brake/tacho cables and the matching feed cables. Ready assembled with plugs and sockets on request. Cost-reducing assembly The use of pre-assembled E-ChainSystems® enables expensive assembly hours at the place of installation to be considerably reduced. Functionally tested systems guarantee that plant components are soon put into operation. Assembly service We would be pleased to send you an offer for complete solutions, including all assembly services. You do not tie up your own resources and you have a trouble-free energy supply system for the future at a fixed price. LBT FLIZZ® - High speeds and accelerations Travel distances up to 120m, travel speed up to 8 m/s Suitable for moving or stationary controls, ideal for all bus systems When light weight is required When quiet, maintenance-free operation is required When rust-proof property is required At -10°C to +60°C constant temperature At accelerations over 10 m/s² Energy supply system for all media, not only electrical Also suitable for outdoor use (with reduced load data) Your benefit from LBT FLIZZ® Guaranteed service life Cost-effective compared with conventional energy supply systems Cable protected against dirt, rain, sun, ice, snow and leaves Insensitive to wind and motion Good resistance to chemicals, solvents, etc. Use of special cables possible, e.g. servo drive cables, fiber optic cables, bus systems etc. almost maintenance free Quick and easy installation due to delivery as a ready-assembled system Easy integration with existing plants Cable length 50% of the travel distance No central cable junction No effort required to maintain carriages Sewage treatment plant Longitudinal scrapers Sand traps Rain water overflow reservoir Galvanizing equipment Cranes Plant construction Space-saving and compact energy supply with LBT FLIZZ® - low maintenance system, delivered pre-fitted with ready-assembled igus® E-Chain Energy supply system protected from wind and weathering. The used materials are weather-resistant, as well as resistant against most chemicals, oils, fats, coolants and solvents Solid plastic with powder-coated support tubes Modular assembly: the system can be enclosed with intermediate panels! Can be delivered pre-fitted Variable fields, which are simply screwed on top of each other Glide rail integrated in the profile

Other information IF -Design Award for Triflex®-Design Torsional movements possible Other information Installation instructions Joining, separating and filling of the Triflex®. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. Triflex® 332.16 Inner height hi: 16 mm Inner width Bi: 16 mm Bending radii R: 38 - 100 mm Pitch: 13.3 mm E-Chain®. 332.32 Inner height hi: 32 mm Inner width Bi: 32 mm Bending radii R: 75 - 250 mm Pitch: 25 mm E-Chain®. 332.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 100 - 250 mm Pitch: 30 mm E-Chain®. 332.75 Inner height hi: 75 mm Inner width Bi: 75 mm Bending radii R: 140 - 300 mm Pitch: 36 mm E-Chain®. 352.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 10 - 250 mm Pitch: 30 mm E-Chain®, snap-open 333.16 Inner height hi: 16 mm Inner width Bi: 16 mm Bending radii R: 38 - 100 mm Pitch: 13.3 mm E-Chain®. 333.32 Inner height hi: 32 mm Inner width Bi: 32 mm Bending radii R: 75 - 250 mm Pitch: 25 mm E-Chain®. 333.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 100 - 250 mm Pitch: 30 mm E-Chain®. 333.75 Inner height hi: 75 mm Inner width Bi: 75 mm Bending radii R: 140 - 300 mm Pitch: 36 mm E-Chain®. 353.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 10 - 250 mm Pitch: 30 mm E-Chain®, snap-open This modular, rugged joint system is suitable for: Three-axis movements for machines of any type For dirt-filled environments High tensile strength Where rectangular shapes are requested Completely closed - reliable protection against dirt and chips Combination of different bending radii and axes Connection and separation possible at any chain Flanged mounting brackets or brackets, galvanized steel Snap-open Series 352 and 353 Combination of Series 353/333 possible Typical industrial sectors and applications Machine tools Robotics Material handling system Plastics industry Construction machinery Vehicle manufacturing Medical equipment IF -Design Award for Triflex®-Design Torsional movements possible

Versatile choice due to the high torque and speed. This motor is the best choice for most applications with medium loads. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. The connector interface provides a high IP65 protection level (IP: International Protection). The higher the IP rating, the better the motor is protected from the ingress of dirt and water. The encoder sends signals from the motor to the motor control. The encoder verifies that the required linear motion has occurred precisely as required. Encoder = increased machine accuracy.

- Low-maintenance system for travel up to 100 m - Other sizes and versions available, travel up to 200 m and more with E2 roller e-chains® - Protection against weather and dirt exposure - Cost-effective and fully enclosed complete solution - Standardized and modular design - Simple wall assembly or optional floor mounting - Cable lengths up to 50% shorter than festooning, low-profile installation and no cable junction - Cables are at all times guided with a defined bending radius, and tensile forces are absorbed by the e-chain® - Cables cannot hook, jam, or tear - No slip ring contacts (as is the case on motor drums) -Cables or hoses can easily be retrofitted at any time Reduce electricity costs - direct drive due to scraper, no additional drives needed (as is the case on motor drums) Scraper arm (e.g. as mechanical connection to the scraper carriage) optionally available - we document the situation on-site and will propose a customised solution

Lightning fast opening and closing with Zipper E-Chain® und E-Tubes - Zipper E-Chain® satisfy by their practicability and performance. The "zip fastening" function shortens the installation time. The small pitch, the rugged elastic zipper band and the heavy duty links amaze in high accelerations. The Zipper series is one of the most popular igus® E-Chain® series in the sophisticated industrial sectors. Other information Series 047 Inner height hi: 9 mm Inner widths Bi: 10 - 16 mm bending radii R: 18 - 38 mm Pitch: 13 mm E-Chain®, rip-open along the outer radius Series 07 Inner height hi: 10,3 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 48 mm Pitch: 20 mm E-Chain®, rip-open along the outer radius Series 09 Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, rip-open along the outer radius Series 15 Inner height hi: 17 mm Inner widths Bi: 15 - 100 mm bending radii R: 38 - 180 mm Pitch: 30,5 mm E-Chain®, rip-open along the outer radius Series 17 Inner height hi: 32 mm Inner widths Bi: 15 - 100 mm bending radii R: 63 - 125 mm Pitch: 30,5 mm E-Chain®, rip-open along the outer radius Series R07 Inner height hi: 10,3 mm Inner widths Bi: 10 - 50 mm bending radii R: 38 - 48 mm Pitch: 20 mm E-Tube, rip-open along the outer radius Series R09 Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 48 - 100 mm Pitch: 20 mm E-Tube, rip-open along the outer radius Series R15 Inner height hi: 17 mm Inner widths Bi: 25 - 80 mm bending radii R: 63 - 180 mm Pitch: 30,5 mm E-Tube, rip-open along the outer radius Series R17 Inner height hi: 32 mm Inner widths Bi: 15 - 63 mm bending radii R: 63 - 125 mm Pitch: 30,5 mm E-Tube, rip-open along the outer radius Clean room Class 1 (ISO class 3) for Series 15, tested by the Dryden Engineering Company, California. iF-Design-Award for Zipper-Design UL94-V0 classification on request 58 dB(A) determined at the igus® laboratory, v = 1.0 m/s unsupported, Series 09.50.028.0 Lightning fast opening and closing with Zipper E-Chain® und E-Tubes - Zipper E-Chain® satisfy by their practicability and performance. The "zip fastening" function shortens the installation time. The small pitch, the rugged elastic zipper band and the heavy duty links amaze in high accelerations. The Zipper series is one of the most popular igus® E-Chain® series in the sophisticated industrial sectors. Series 047 Inner height hi: 9 mm Inner widths Bi: 10 - 16 mm bending radii R: 18 - 38 mm Pitch: 13 mm E-Chain®, rip-open along the outer radius Series 07 Inner height hi: 10,3 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 48 mm Pitch: 20 mm E-Chain®, rip-open along the outer radius Series 09 Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, rip-open along the outer radius Series 15 Inner height hi: 17 mm Inner widths Bi: 15 - 100 mm bending radii R: 38 - 180 mm Pitch: 30,5 mm E-Chain®, rip-open along the outer radius Series 17 Inner height hi: 32 mm Inner widths Bi: 15 - 100 mm bending radii R: 63 - 125 mm Pitch: 30,5 mm E-Chain®, rip-open along the outer radius Series R07 Inner height hi: 10,3 mm Inner widths Bi: 10 - 50 mm bending radii R: 38 - 48 mm Pitch: 20 mm E-Tube, rip-open along the outer radius Series R09 Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 48 - 100 mm Pitch: 20 mm E-Tube, rip-open along the outer radius Series R15 Inner height hi: 17 mm Inner widths Bi: 25 - 80 mm bending radii R: 63 - 180 mm Pitch: 30,5 mm E-Tube, rip-open along the outer radius Series R17 Inner height hi: 32 mm Inner widths Bi: 15 - 63 mm bending radii R: 63 - 125 mm Pitch: 30,5 mm E-Tube, rip-open along the outer radius E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining and separating of the Zipper E-Chain®. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. Zipper Zipper E-Chain® Short installation time: Lightning fast opening and closing of lids with zipper Zipper lid can be separated and joined in any chain link Small pitch for low-noise, silent operation High accelerations: 100 m/s² and more Interior separation possible Zipper E-Tube resistant against chips and dirt Closed E-Tube with zip-open system Protection against dirt and chips Lightning fast opening of the lid in a band Modular design - simple lengthening and shortening Small division for low-noise, silent operation, high accelerations Typical industrial sectors and applications Automatic insertion machines Semiconductor devices Linear motors, handling systems Any kind of technical equipment Measuring instruments Machine tools (Zipper E-tube) Clean room Class 1 (ISO class 3) for Series 15, tested by the Dryden Engineering Company, California. iF-Design-Award for Zipper-Design UL94-V0 classification on request 58 dB(A) determined at the igus® laboratory, v = 1.0 m/s unsupported, Series 09.50.028.0

PLANTUS MICELLAR contains lavandula angustifolia, lauris nobilis, rosa damascena. Lavandula angustifolia is a powerful natural anti-oxidant and has an anti-aging effect. It makes your skin look lively and bright with its moisturizing and nourishing effect. Lauris nobilis contains sineol which reduces inflammation, purifies the skin from dirt and protects it from external factors. While Plantus Micellar helps removing make-up with the antioxidant effect of the rosa damascena in it, it reduces the formation of acne by protecting the moisture balance.

The white protective overall is available in three sizes M/L/XL. It has well-fitted trouser legs and sleeves and a tight-fitted hood. In order to provide the greatest degree of protection, the coverall is equipped with a zipper that possesses an additional protection in form of an extra layer of fabric. The protective overall is made of lightweight and breathable material that has good protective properties and reduces the risk of germs being transferred to the skin. The material provides excellent protection and serves as a barrier for solid particles against splashes and bacteria. Application: protection against harmful external factors, protection of the employee’s body against dirt, as well as chemical, biological, mechanical and thermal factors. The product can be used as a medical protective overall, disposable overall, as well as a chemical protective overall.

Double-acting special cylinders with a customer-specific base flange, pre-assembled with fork mounts with flexible rubber bellows over the piston rod to protect against coarse dirt and aggressive environments. Specially designed for use in commercial vehicles or agricultural machinery.

Blown film consistent quality by the roll At Dürrbeck you can expect a large selection of tubular film in various widths and thicknesses and with a range of features. This variety is important as products vary in their shapes and sizes, and require different levels of protection. Plastic blown film is especially suitable for products with adjustable lengths. Blown film is typically made of low-density polyethylene (LDPE). Polyethylene is affordable, durable, watertight and tear-resistant. Depending on how it will be used, we also produce plastic blown film made of high-density polyethylene (HDPE), medium-density polyethylene (MDPE), and linear low-density polyethylene (LLDPE). Blown film made of DKFol®-Eco and DKFol®-Eco-Coex offers especially high strength with low thickness. These films allow for a reduction in thickness, without compromising on strength and stability.

Foil gloves Gloves are universal, they fit both the right and left hand. Designed for use wherever you want to protect your hands from dirt or contact with objects used by other people. They will prove themselves during shopping, for home use, in restaurants, pastry shops, hairdressing salons, gas stations, etc. Made of HDPE foil, they have high resistance to tearing and tearing. Key product features: Universal, fits the right and left hand Colour: transparent HDPE foil Thickness 10 microns Pack of 100 pieces - 50 pairs I invite you to wholesale cooperation

Protective caps for polygonal taper shank tool holders according to ISO 26623-1 Delicate polygonal taper shank tool holders are protected against dirt and damage during transportation and storage Incorporated latches prevent unintentional release from the shank Impact and crack resistant Polyethylene

Franke FTB linear tables impress with their compact and robust design. The integrated aluminum roller guide is maintenance-free and protected from dirt by a metal cover. It is driven by a spindle. Franke FTB linear tables are suitable for precise processes in many measuring, testing and positioning applications. They are available in stroke lengths from 100 to 1500mm.

With the GPL 3000 you can detect the smallest of leaks. Leak detection is particularly problematic for seals with swellable materials. The leak detection sprays cause the sealing materials to swell and the leak is temporarily sealed again. The use of a gas detector is essential in this area. The sensor in the GP 2000 is protected from dirt and mechanical stress by a metal protective cap. Clear display of the measured values makes it easy for inexperienced users to find leaks. Together with the robust metal sensor head and the stable casing, the GP 2000 is a professional leak detector for everyday work.

With the GPL 3000 you can detect the smallest of leaks. Leak detection is particularly problematic for seals with swellable materials. The leak detection sprays cause the sealing materials to swell and the leak is temporarily sealed again. The use of a gas detector is essential in this area. The sensor in the GPL 3000 is protected from dirt and mechanical stress by a metal protective cap. Clear display of the measured values makes it easy for inexperienced users to find leaks. Together with the robust metal sensor head and the stable casing, the GPL 3000 is a professional leak detector for everyday work.

With the GPL 3000 Ex you can detect the smallest of leaks. Leak detection is particularly problematic for seals with swellable materials. The leak detection sprays cause the sealing materials to swell and the leak is temporarily sealed again. The use of a gas detector is essential in this area. The sensor in the GPL 3000 Ex is protected from dirt and mechanical stress by a metal protective cap. Clear display of the measured values makes it easy for inexperienced users to find leaks. Together with the robust metal sensor head and the stable casing, the GPL 3000 Ex is a professional leak detector for everyday work.

Our shrink hoods and pallet covers are the ideal packaging solution for pallets, machines, appliances, large equipment and construction materials, as well as all other bulky items that need protection against dirt and other harmful influences. PE shrink hoods and pallet covers can also be used as lining for lattice boxes or other types of cartons. Dürrbeck pallet protectors and shrink hoods offer excellent protection against corrosion, moisture and more, at all times. As professionals in plastic packaging solutions, we produce shrink hoods and pallet covers to order – tailored to meet the various needs of our customers’ specific industry or goods.

For mesh boxes and mesh frames Fastening with straps with magnetic fastener Secure hold due to strongly adhering magnets Quick release and repositioning possible Flap protects against moisture and dirt

Ideal for assembly and operating instructions Transparent 160 mµ foil Fully self-adhesive and strongly adhesive Stretch pleat for documents up to a thickness of 15 mm Flap protects against dust and dirt

To better protect the sensor head of the GasPen from dirt, this protective cap can be put on the sensor head.

This very compact thin layer surrounds the lifting strap either on a single side or completely. It is extremely wearresistant and ideal for very rough surfaces. The Powerflex coating provides additional protection to the textile against dirt and the penetration of foreign particles.

Why make something complicated when you can make it easy? PE sheets – made to order in the size you need – save you the time and effort of manually or mechanically cutting plastic covers. PE sheets are pre-cut flat film sheets. PE sheets from Dürrbeck are manufactured bespoke to meet your needs. Plastic sheets are used as covers for pallets, as a liner between individual packaged units, or as a packaging material itself. When combined with stretch film pallet wrap, it provides excellent protection against dirt, dust and the elements. Our custom-made PE sheets also act as a simple liner or cover for goods in a warehouse or in transport. We produce plastic sheets loose or perforated on rolls – simply tear off, use, done! Dürrbeck plastic sheets are a favourite among customers because of their high quality, convenience and unbeatable value for money.