Protection plates - Import export

Frame made of aluminium profile bars connected by "Tox" connections - Intumescent gas, smoke and flame tight seal in case of fire - Restraint security - Hidden latches - Screwed GKF gypsum plasterboards - Quick and easy installation The 60-minute ceiling fire dampers are designed for installation in false ceilings for self-contained fire protection, one of the requirements being "combustible load only on the room side" and the fire resistance class being EI 60. They provide effective protection against fire progression from the room into the false ceiling area. The integrated aluminium frame is equipped with a fire stop. The cover of the inspection hatch is fitted with a DF fire protection plate and protected against smoke entry by a versatile all-round seal. The cover is secured on both sides by automatic safety hooking arms. The safety catching arms ensure that the lid is intercepted every time the hatch is opened. The lid is easy to remove and replace.

Frame made of aluminium profile bars connected by "Tox" connections - All-round EPDM lip seal - Restraint security - Hidden latches - Screwed GKF gypsum plasterboards Tested for fire resistance from underneath (room side) NF EN 1634-1 : +A1 : 2018 Fire dampers EI 30 are designed to be installed in false ceilings for self-contained fire protection, one of the requirements being "combustible load only on the room side" and the fire resistance class being EI 30. They provide effective protection against the progression of fire from the room into the false ceiling area. The integrated aluminium frame is equipped with a fire stop. The cover of the inspection hatch is fitted with a DF fire protection plate and protected against smoke entry by a versatile all-round seal. The cover is secured on both sides by automatic safety hooking arms.

Cost-effective solution for fire-protected shaft walls - With peripheral lip seal (silicone) against smoke penetration - Quick and easy installation. Fire resistance on duct side and room side NF EN 1634-1 : +A1 : 2018 The inspection hatch is specially designed for installation on technical ducts with one of the requirements "external and internal heat load of the duct" and a fire resistance class EI 30. It offers a safe protection against the spread of fire from a room into the duct or counteracts it. The aluminium mounting frame is equipped with a fire protection strip. The cover of the inspection hatch is filled with DF fire protection plates and protected against the passage of smoke by a four-sided circumferential seal. The cover is secured on both sides by self-adjusting safety arms. These safety arms ensure that the cover stops every time the door is opened. The cover can be easily removed and replaced

Frame made of aluminium profile bars connected by "Tox" connections - All-round EPDM lip seal - Restraint security - Hidden latches - Screwed GKF gypsum plasterboard Tested for fire resistance from underneath (room side) NF EN 1634-1: +A1: 2018EN 1634-1: +A1: 2018 Fire dampers EI 60 are designed to be installed in false ceilings for self-contained fire protection, one of the requirements being "combustible load only on the room side" and the fire resistance class being EI 60. They provide effective protection against the progression of fire from the room into the false ceiling area. The integrated aluminium frame is equipped with a fire stop. The cover of the inspection hatch is fitted with a DF fire protection plate and protected against smoke entry by a versatile all-round seal. The cover is secured on both sides by automatic safety hooking arms.

Frame made of aluminium profile bars connected by "Tox" connections - All-round EPDM lip seal - Restraint security - Hidden latches - Screwed GKF gypsum plasterboards Tested for fire resistance from underneath (room side) NF EN 1634-1 : +A1 : 2018 Fire dampers EI 90 are designed to be installed in false ceilings for self-contained fire protection, one of the requirements being "combustible load only on the room side" and the fire resistance class being EI 90. They provide effective protection against the progression of fire from the room into the false ceiling area. The integrated aluminium frame is equipped with a fire stop. The cover of the inspection hatch is fitted with a DF fire protection plate and protected against smoke entry by a versatile all-round seal. The cover is secured on both sides by automatic safety hooking arms.

Frame made of aluminium profile bars connected by "Tox" connections - All-round EPDM lip seal - Restraint security - Hidden latches - Screwed GKF gypsum plasterboards Tested for fire resistance from underneath (room side) NF EN 1634-1: +A1: 2018 Fire dampers EI 120 are designed to be installed in false ceilings for self-contained fire protection, one of the requirements being "combustible load only on the room side" and the fire resistance class being EI 120. They provide effective protection against the progression of fire from the room into the false ceiling area. The integrated aluminium frame is equipped with a fire stop. The cover of the inspection hatch is fitted with a DF fire protection plate and protected against smoke entry by a versatile all-round seal. The cover is secured on both sides by automatic safety hooking arms.

We have developed strong and reliable supply chain for applying additional part treatment beside machining. We can offer any kind of plating, heat treatment or grinding. Some of most common type of galvanic surface protection: Zinc plating in barrels and on racks zinc-nickel alloy in barrels phosphating in zinc phosphate nickel plating in barrels tinning in barrels copper plating in barrels chemical polishing and passivation of copper and copper alloys recrystallization annealing and tempering. Heat treatment: Hardening and tempering nitriding and nitrocarbunizing carburizing and carbonitriding annealing and other treatment.

Recommended applications: The HAGOlifter is most suitable for HAGO manhole covers without hinge. With this convenient lifter the lifting of manhole covers becomes child's play. Even heavy covers can be lifted and moved to the side by just one person and without any particular efforts. Scope of delivery: The HAGOlifter is delivered as a complete set consisting of: 2 pcs. Lifting unit (painted red) with aluminium wheels and rubber tyres 2 pcs. Fixing screws M10 (for HAGO manhole covers made of aluminium) 2 pcs. Fixing screws M12 (for HAGO manhole covers made of galvanized and stainless steel) 2 pcs. Rubber protection plates (to place on sensitive floors) Also available in special design HAGOlifter HL-31 XH (extra high) with extended lifting height (31 cm). The design HL-31 XH is only required for the manhole cover BV(E)HS 400/110 (concerns only size 100 x 100 cm) or for the particularly high HAGO special covers.

stainless steel*excellent stability*optimum height for use with Usbeckl aboratory Burners*space saving delivery and storage due to dismountable feet*Added value: Plate holder offers protective mat function

1000VDC PV4.0 Diode Connector Product Description: Insulation material: PPE/PA Rated current(Without Diode): 30A Rated current(With Diode): 10A(Diode Rated Current 15A) Rated voltage: 1000VDC Test voltage: 6kV(50Hz,1min)  Typical contact resistance: ≤0.25 mΩ Contact material: Copper, Tin plated Degree of protection: IP67 Overvoltage category/Pollution degree: CATIII/2 Safety degree: II Flame class: UL94-V0 Insertion force/Withdrawal force: ≤50N / ≥50N Ambient temperature range: -40℃…+85℃(IEC) Upper limiting temperature: 110℃(IEC) Connecting system: Crimp connection Nut cap locking force: 1.5-1.8Nm

Diode Connector Product description: Insulation material: PPE/PA Rated current(Without Diode): 30A Rated current(With Diode): 10A(Diode Rated Current 15A) Rated voltage: 1000VDC Test voltage: 6kV(50Hz,Imin)  Typical contact resistance: ≤0.25 mΩ Contact material: Copper,Tin plated Degree of protection: IP67 Overvoltage category/Pollution degree: CATIII/2 Safety degree: II Flame class: UL94-V0 Insertion force/Withdrawal force: ≤50N / ≥50N Ambient temperature range: -40℃…+85℃(IEC) Upper limiting temperature: 110℃(IEC) Connecting system: Crimp connection Nut cap locking force: 1.5-1.8Nm

1000VDC PV4.0 Diode Connector Product description: Insulation material: PPE/PA Rated current(Without Diode): 30A Rated current(With Diode): 10A(Diode Rated Current 15A) Rated voltage: 1000VDC Test voltage: 6kV(50Hz,1min)  Typical contact resistance: ≤0.25 mΩ Contact material: Copper,Tin plated Degree of protection: IP67 Overvoltage category/Pollution degree: CATIII/2 Safety degree: II Flame class: UL94-V0 Insertion force/Withdrawal force: ≤50N / ≥50N Ambient temperature range: -40℃…+85℃(IEC) Upper limiting temperature: 110℃(IEC) Connecting system: Crimp connection Nut cap locking force: 1.5-1.8Nm

1000VDC PV4.0 Diode Connector Product description: Insulation material: PPE/PA Rated current(Without Diode): 30A Rated current(With Diode): 10A(Diode Rated Current 15A) Rated voltage: 1000VDC Test voltage: 6kV(50Hz,1min)  Typical contact resistance: ≤0.25 mΩ Contact material: Copper,Tin plated Degree of protection: IP67 Overvoltage category/Pollution degree: CATIII/2 Safety degree: II Flame class: UL94-V0 Insertion force/Withdrawal force: ≤50N / ≥50N Ambient temperature range: -40℃…+85℃(IEC) Upper limiting temperature: 110℃(IEC) Connecting system: Crimp connection Nut cap locking force: 1.5-1.8Nm

Use: Connector panels for thermocouple and resistance thermometer measurement circuits for installation in control rooms, operating panels, laboratory areas, switch panels, push-in housings, etc. Mechanical design: • Aluminium front plate, anodised, protected against corrosion. • Measurement circuit numbering, abrasion- and wipe-proof. • Attachments of stainless steel and nickel-plated brass. • The assembly type and design prevent the fitted built-in couplings from being pushed in or out. • The bevelled connection levels enable easy connection and disconnection of the conductors in the installed condition. • Individual built-in couplings can be replaced by loosening only a few screws. • Flat, flush front surface enables easy cleaning. • Standard panels with 1

Brass float valves of open design in 3 and 4 inches can be combined with our hollow float balls made of high-quality PE-HD plastic (max. 70 °C), alternatively also with copper or stainless steel balls. The chemical nickel plating provides corrosion protection.

1000VDC PV4.0 Diode Connector Product description: Insulation material: PPE/PA Rated current(Without Diode): 30A Rated current(With Diode): 10A(Diode Rated Current 15A) Rated voltage: 1000VDC Test voltage: 6kV(50Hz,1min)  Typical contact resistance: ≤0.25 mΩ Contact material: Copper,Tin plated Degree of protection: IP67 Overvoltage category/Pollution degree: CATIII/2 Safety degree: II Flame class: UL94-V0 Insertion force/Withdrawal force: ≤50N / ≥50N Ambient temperature range: -40℃…+85℃(IEC) Upper limiting temperature: 110℃(IEC) Connecting system: Crimp connection Nut cap locking force: 1.5-1.8Nm

PV4.0 2 to 1 Solar Branch Inline Fuse Connector Insulation material: PPE/PA Rated current(Without fuse): Max. Input:30A                                               Max. Output:60A Rated voltage: 1500VDC Test voltage: 8kV Typical contact resistance: ≤0.25mΩ Rated Impulse voltage: 16kV Contact material: Copper, Tin plated Degree of protection: IP68 Safety degree: II Overvoltage category/Pollution degree: CATIII/2 Flame class: UL94-V0 Ambient temperature range: -40℃…+85℃(IEC) Suitable cable cross sections: 4-10sqmm Upper limiting temperature: 110℃(IEC) Fuse specifications: 1A-50A Regulatory approval: TUV/CE(EN60269/EN62208)

PV4.0 2 to 1 Solar Branch Inline Fuse Connector Insulation material: PPE/PA Rated current(Without fuse): Max. Input:30A                                               Max. Output:60A Rated voltage: 1500VDC Test voltage: 8kV Typical contact resistance: ≤0.25mΩ Rated Impulse voltage: 16kV Contact material: Copper, Tin plated Degree of protection: IP68 Safety degree: II Overvoltage category/Pollution degree: CATIII/2 Flame class: UL94-V0 Ambient temperature range: -40℃…+85℃(IEC) Suitable cable cross sections: 4-10sqmm Upper limiting temperature: 110℃(IEC) Fuse specifications: 1A-50A Regulatory approval: TUV/CE(EN60269/EN62208)

"Use:Connector panels for thermocouple and resistance thermometer measurement circuits for installation in control rooms, operating panels, laboratory areas, switch panels, push-in housings, etc. Advantage: Self-locking connector. The locking device prevents accidental faulty connections and unintentional disconnection during the measurement process. Compatible with Connector Mininiature CMP-XX. Mechanical design: • Aluminium front plate, anodised, protected against corrosion. • Measurement circuit numbering, abrasion- and wipe-proof. • Attachments of stainless steel and nickel-plated brass. • Montageart und Konstruktion verhindern ein Hinein- oder Herausdrücken der montierten Einbau-Kupplungen. • The bevelled connection levels enable easy connection and disconnection of the conductors in the installed condition. • Individual built-in couplings can be replaced by loosening only a few screws.

Install impact protection For screwing and riveting secutex impact protection with an internal perforated plate can be screwed or riveted in different ways. You can achieve universal impact protection in no time at all. For welding Welding is often the easiest and fastest way of fastening. The various protruding perforated sheet designs allow a very versatile use. For gluing If screwing or welding is not possible, the impact protection can be glued with the secutex special adhesive. Cutting and sawing The secutex material can be sawed with a conventional band saw. The material tries to avoid the cutting tool. Make sure that the wedge angle is as small as possible and adjust the cutting speed if necessary. Milling Use commercially available milling cutters with a small number of teeth. Circumferential speed approx. 200400 m / min, clearance angle ∂ 10 °, clamping angle y 25 °. The use of a drilling emulsion is recommended for cooling and surface optimization. Rotate

PV4.0 2 to 1 Solar Branch Inline Fuse Connector Insulation material: PPE/PA Rated current(Without fuse): Max. Input:30A / Max. Output:60A Rated voltage: 1500VDC Test voltage: 8kV Typical contact resistance: ≤0.25mΩ Rated Impulse voltage: 16kV Contact material: Copper, Tin plated Degree of protection: IP68 Safety degree: II Overvoltage category/Pollution degree: CATIII/2 Flame class: UL94-V0 Ambient temperature range: -40℃…+85℃(IEC) Suitable cable cross sections: 4-10sqmm Upper limiting temperature: 110℃(IEC) Fuse specifications: 1A-50A Regulatory approval: TUV/CE(EN60269/EN62208)

Corners – Frames – Plates Protective and case corners protect your product from mechanical damage and emphasise the sturdiness of your product. Label frames, surrounds, decorative panels and decorative plates complete the portfolio for boxes and cases. These fittings are available in a wide range of materials and surface options and can, depending on our product and your design requirements, be fastened using screws, nails or adhesive. Should you have additional questions or special requirements please contact us » Corners – Frames – Plates Protective and case corners protect your product from mechanical damage and emphasise the sturdiness of your product. Label frames, surrounds, decorative panels and decorative plates complete the portfolio for boxes and cases. These fittings are available in a wide range of materials and surface options and can, depending on our product and your design requirements, be fastened using screws, nails or adhesive. Should you have additional...

SEAMIAUTOMATIC SEALING DEVICE suitable for the sealing of all sorts of plastic and glass containers. 1. foil application device PolySeal Vario DIS (left hand side) electro-pneumatic stepless pressure regulation stepless manual height adjustment with height scale foil dispensing with 2 spot pre-sealing removable pre-sealing plates heat protection shield vacuum suction nozzle roller guide with running slide foil magazine for stackable pre-cut sealing lids VARIOTRONIC, control unit for the regulation of temperature, sealing time and pressure 2. sealing device PolySeal Vario PN (right hand side) electro-pneumatic stepless pressure regulation stepless manual height adjustment with height scale sealing head heating block, swingable, anodised aluminium hollowed out sealing die heat protection shield container holder VARIOTRONIC, control unit for the regulation of temperature, sealing time and pressure

If you want to explore MIG welding, Lincoln Electric's Handy MIG® machine is your ideal solution. Designed for flexibility and simplicity, this MIG welding machine is notable for its portability and ease of use, connecting to a 230V, 20 amp power source. Equipped with four voltage settings and a system for continuously adjusting the wire feed speed, the Handy MIG® is capable of welding mild steel from thin thicknesses up to 3.2 mm. The equipment is supplied almost ready to use, including almost all the accessories necessary to start MIG welding: a torch with mounted cable, an earth cable with clamp, a gas nozzle, a gas regulator with hose, a wire coil solid, contact tips, and a protective mask with filter plate and lens. You just need to add a shielding gas cylinder. Additionally, it includes a coil of self-shielded flux-cored wire, additional contact tips and a hammer with cleaning brush, expanding the functionality of the Handy MIG® for welding with and without gas.

Custom Titanium Plated Decorative Parts Ming Xiao Manufacturing Co., Ltd engaged in Lathe Turning Parts manufacturing more than 20 years,We produce various metal parts for all industries, and provide rich finish surface treatment services, such as the Titanium nitride decorative parts. What is Titanium plating finish? Titanium plating is a chemical method to attach titanium metal to the surface of other objects. The formed titanium coating has excellent corrosion resistance and can be used to protect the plated object and improve surface wear resistance. There is also a saying that plating titanium or its compounds (such as titanium nitride) on the surface of an object is collectively referred to as titanium plating. As a professional precision CNC turned parts supplier from China,we can custom producing all kinds Carbon & Stainless steel turning parts,Copper & Brass turning parts,Aluminum Turning Parts & Machined parts.

Product Identification Chemical name: 3,3'-(oxydimethanediyl)bis(3-ethyloxetane) Synonyms: 3-Ethyl-3[[(3-ethyloxetane-3-yl)methoxy]methyl]oxetane CAS No.: 18934-00-4 Molecular formula: C12H22O3 Molecular weight: 214.30 Boiling point: 274.58 °C @ 760 mmHg Density: 0.992 g/mL Refractive index: 1.453 Specification Appearance: Colorless transparent liquid Purity: 99.00%min by GC Moisture: 0.10%max Package Regular Packing: N.W 20kg/200kg iron drum lined with plastic Sample Packing: 0.1kg-1kg plastic bottle Transport Information Classification: Non-dangerous goods HS Code: 2932999099 Status & Application Status: Industrial scale Application: 1) Used for preparing thermal curing ink-jet ink. 2) Used for Protective film for polarizing plate that suppresses egg-shaped blur in liquid crystal display devices (especially IPS type liquid crystal display devices) under high temperature and high humidity conditions

Electrical control panel for starting and capacity control of : the compressor, the air dryer, the cooling water system with pump when supplied. Cabinet made of 2mm enamelled plate, protection to IP54 hermetically sealed and containing: Main circuit breaker and fuses. Star delta starter for compressor. Fuses for auxiliary circuits. Safety device to prevent compressor starting against load. Microprocessor description overview Capacity control with fully automatic start and time delayed stop of the compressor. Monitoring of air an oil temperatures on each stage, as well as oil and air pressures. Safety controls. Memorised defect system. Service intervals for maintenance. Details of loaded and total running hours. Simple keypad operation. Multi language message displays. RS485 data communication line for remote control or monitoring. Diagnostics, reprogram, Analog, digital configuration… new model available 2009 sept. Main Selection Monitoring Start control Pressure...