Profile grooves - Import export

Advantages of Heating Plates with Square Cartridge Heaters: -> Simple plate manufacture due to rectangular groove geometry, no deep-hole boring -> Simple heater installation by bending and pressing along the plate surface -> Complex plate geometries with bores and openings -> Optimal heat transfer due to 75% surface contact -> No casting with heat conductive compound -> Uniform temperature profiles due to thermally optimized groove layouts/power distribution and utilization of insulation plates -> high process temperatures (up to 450°C in aluminium, up to 700°C in stainless steel) Example "Heated Stamp": D=100 mm out of tempered tool steel up to max. 700°C continuous temperature. Fitted with 2 Square Cartridge Heaters 1500 W/ 230 V, 4,5 x 4,5 mm x 600 mm, with 50 mm unheated at the termination end. Annealed and formable with a nickel sheath, resistant up to 850°C surface temperature. Connection by fibreglass insulated pure nickel high-temperature leads (max. 500°C)

Pelton turbines are used in hydropower plants with a high head. The sealing system specifications are equally high.Control of the turbine output is infinitely variable from part to full load by adjusting the nozzle spear valve. The control unit for linear adjustment of the jet needle can be protected against water and silt infiltration by the MANOY® system seal WP. Types 466 and 486 (both inner sealing) were specially developed for these applications. Types 461 and 481 are for outer sealing configurations. In the context of design, types 481 and 486 must have a split housing. All versions can be supplied with customized profile dimensions for existing groove designs.

The Amroc-Panel stands up to the highest expectations when used as drywall, and features superior walking comfort, compressive strength and acoustic insulating characteristics. The "one man" panel in a 1,250 x 625mm size has proven its use. It has a sanded surfaces on both sides, and features a tongue and groove edge profile on all sides. The panel can be used in floating installations, requiring the panels to be glue-bonded at the profiled edges at all times. A felt substrate layer (or similar) is used as a footfall sound insulator and increases walking comfort. Furthermore, a vapor diffusion barrier must be installed under the floorboard. As an additional installation option, the panels can be mounted to floor beams for modernization work on old structures. For this application, the panels are also bonded to each other with glue and are additionally mounted to the sub-structure with screws.

Thanks to the latest machinery and our qualified staff, we are able to perform precision mechanical metal processing and both customised processing of parts and manufacture from drawings, with high quality standards.Specifically, our company offers: Mechanical turning Mechanical milling Mechanical boring Mechanical drilling Mechanical slotting for the production of keyways for keys, key bits and grooved profiles. We also specialize in the installation of mechanical assemblies, including complex ones.

Milling connector set ; for quick and stable connection of two aluminium profiles without profile machining. different sizes: — Profile 30, 40, 45 — profile groove 8 or 10 material: — Steel, zinc plated Set contents: 1 milling connector 1 screw DIN 912 1 hammer nut

Cube connector (set) 2D and 3D, to connect three aluminum profiles at right angles with cover caps to cover the bores Different sizes: — Profile: 20, 30, 40, 45 — Profile: 1" — Profile groove 5; 6; 8; 10 Material: — Cube connector: die-cast aluminium, bright or aluminium-coloured — Cover cap: PA plastic — Mounting set Steel, galvanised Various types/versions: — Individually with cover caps — optionally incl. mounting set Various screws are available: ISO 7380 M5x14 or UNC 1/4-20x1" self-tapping screws S8x25-SW5 or S12x30 - Torx T50 Translated with www.DeepL.com/Translator (free version)

Uni-connector, For making a T- and butt joint as well as a mitre joint 45° between two aluminium profiles BUTT- or T-CONNECTORS different sizes: — Profile 20, 30, 40 — Profile groove 5, 6, 8 Available individually or with various assembly sets with slot nut and screw! JUNCTION BUTTING JOINERS: — Proiflslot 8 in set with 2 screws ISO 7380 - M6 x 35 Material: Zinc die-cast

Plate connector (set); To tee and Length-connect two aluminum profiles different sizes: — Profile 30, 40, 45, 80 — profile groove 8 or 10 Material selection: — Die-cast aluminium blank or aluminium-color — Zinc die-cast blank or aluminium-color — Plastic PA, glass fibre reinforced (black) Available separately or with various mounting setswith hammer nuts, T-slot nuts and (self-forming) screws! Other surfaces and other colors on request

T-Slot Nuts and Rhombus T-Slot Nuts for Aluminum Profiles for groove width: 5 - 6 - 6,5 - 8 - 10 - 11 - 12 different designs possible: — single, double — retractable, swiveling — with/without thread — ESD-capable different fixations possible: — spring plate — spring ball — pressure spring different materials possible: — steel, galvanized — plastic — stainless steel separate spring for slot nut as mounting and positioning aid available as accessory many different designs in lengths and widths with/without fixation in the delivery assortment individual designs on request

Workplace equipment and furnishings made of profile technology Slot: 5 - 10 INFORMATION SUPPLY Monitor arms and monitor holders VESA compatible, height adjustable, horizontally and vertically alignable Labelling clip: Labelling of profiles TOOL SUPPLY Cup holder: For placing a bottle or hanging a tool MATERIAL SUPPLY Grab containers: Provision of small parts on separation surface and selective pick-up Can be mounted by swivelling into the profile slot and onto the suspension profile and perforated plate optional adapter can also be swivelled horizontally in the profile groove Optional fixing option Highly visible marking field black, yellow, red, green, grey Tool hanger: Attachment of tools LIGHTING Magnifying luminaire D160 with articulated arm and dimmer fatigue-free and ergonomic work without irritating shadows electrostatic discharge version also available other colors/sizes on request

Various designs (set): for right-angled connection or at 45° angle of 2 round tubes — with/without anti-twist device for right-angled connection of a round tube profile with an aluminium profile — independent of the groove — Groove 8 or 10 for ball but connection of 2 round tubes intersecting connection of 2 round tube profiles parallel connection of 2 round tube profiles or to an aluminium profile Translated with www.DeepL.com/Translator (free version)

Low profile armless cam & groove fittings

We use Shneider and Telemechanic products in electrical materials. -Engine, runs from 0 to 18 thousand cycles. There is no risk of burning based on coercion. And also - this is a special engine used automatically. Drive brand - Mitsubishi. The cutting and calcining tools used are brands from the Czech Republic and Italy. - You can perform many operations such as evicting water, drilling a door, opening a trunk. - It is possible to work both in aluminum and in PVC Universal template. (possibility of making optional templates) Possibility of working alone with triple drilling, copy milling or grooving system. Pneumatic profile clamping system. It is fully automatic with one button operation.

Contactless coded electronic sensor Total safety management with an AWAX controller Suitable for groove profiles and single or double doors Level of performance with AWAX controller: up to PL = e Safety category: up to 4 with an AWAX controller Time before dangerous failure: MTTFd = 334 years Max. activation distance: 10 mm, 2 mm hysteresis Safety contacts/diagnostics: 2 x NO 0.8A max/24V redundant / 1xNF (78S) or 1 x NO (98S) 250mA Detection encoding: mono-code inviolable Indicator: LED indicates code recognition Reset: automatic Attachment: 4 tamper-proof M4 screws (optional ref: BH4). Suitable for grooved profiles. Screw caps provided. Mounting position: 1 Material: Polycarbonate Electrical connection: 2 M12 metal bases for instant serial connection Water resistance: IP 67/68 Temperature: -25°C to +60°C Marking: screen printed + serial no. for traceability

Contactless encoded electronic sensor with relay Category 3 total safety management without an external controller Suitable for groove profiles and single or double doors Level of performance without an external controller: PL = d Level of performance with AWAX controller: up to PL = e Safety category without an external controller: 3 Safety Integrity Level: SIL 2 Cycle before dangerous failure: B10d = 2,000,000 at 2A Max. activation distance: 8 mm, 3 mm hysteresis Safety contacts/diagnostics: 2 x NO 2A/48V redundant / 1 x PNP 250mA (X5) or 1xNF (X5.2) auxiliary Detection encoding: mono-code inviolable Indicator: LED indicates code recognition Reset: automatic (SR version) or Manual (AR version) Attachment: 4 tamper-proof M4 screws (optional ref: BH4). Suitable for grooved profiles. Screw caps provided. Mounting position: 1 Material: Polycarbonate Electrical connection: 1 M12 connector (X5 version) or 2 M12 connectors (X5.2 version for instant serial connection) Water resistance: IP 67/68 Temperature: -25°C to +60°C Marking: screen printed + serial no. for traceability Certification: TÜV Rheinland 01/205/5238/12 License Test Mark 968/EL 214.01/12

Contactless coded electronic sensor Connectors / Wiring compatible with most hardware Suitable for grooved profiles Level of performance with AWAX controller: up to PL = e Safety category: up to 4 with an AWAX controller Time before dangerous failure: MTTFd = 100 years Max. activation distance: 8 mm, 2 mm hysteresis Safety contacts/diagnostics: 2 x NO 0.8A/24V redundant and 1 x 250mA PNP contact Detection encoding: mono-code inviolable Indicator: 1 LED indicating code recognition and 1 LED indicating code absence Reset: automatic Attachment: 4 tamper-proof M4 screws (optional ref: BH4). Suitable for grooved profiles. Screw caps provided. Mounting position: 1 Material: INOX 316L mirror polished Electrical connection: 2 x 50cm cords with M12 connector Water resistance: IP 69K Temperature: -30°C to +70°C. Marking: laser engraving with mechanical punching of the serial number for permanent traceability

RAIL AND ON-RAIL HANDLING SPECIALIST NEW OR USED RAIL We have at our disposal more than 2000 tons of new or used rails on stock. Rails are ex-stock and available Ex-works from PERSAN (val d’Oise, 40kms in the north of PARIS) Main sizes are : height of rail (H), width of base (P), width of head (B), and steel rails with a tensile strengh depending on the section used. Section of rails Vignole rails Type S (S7 -S10 - S14 - S18 - S20 S-30) Crane rails or Burbach Profil conforme aux spécifications techniques de la norme DIN 536-91 Grooved rail Profil conforme aux spécifications techniques de la norme DIN 536-91