Printing data - Import export

Slitting and perforating of paper and foil.

Online printing of variable data such as batch number, production date, etc. Suitable for installation on blister packaging machines. Can be equipped with different inkjet systems.

Meto sterilisation labels to indicate that medical instruments have been sterilised. Identification, monitoring and documentation with a label.
Meto sterilisation labels facilitate reliable process control for medical sterilisation using steam, ethylene oxide and gamma rays thanks to a permanent change in the colour of the indicator ink. It is also possible to print out additional data such as the steriliser, person responsible, date, batch number and use-by date.

Within the thickness measurement instruments range is the Cygnus Mini ROV Mountable ut thickness gauge. This gauge is pressure tested to 500m and designed to be mounted onto small observation ROVs with or without a manipulator facility, allowing the operator to carry out thickness measurements in areas that have previously been unfeasible using large ROVs or divers. Supplied with CygLink software to display and log thickness measurements from the ROV metal thickness tester to a computer at the surface which can then be saved to a file and printed out. CygLink has two data logging facilities Quick Log for simple recording of thickness measurements and Structured mode with four templates available. The Cygnus Top Side Repeater (TSR) is available as an option and has the facility to display the thickness measurements remotely and overlay them on to a video signal. This allows the measurements to be superimposed on the ROV camera’s monitor screen.

Cygnus ROV Mountable ultrasonic thickness gage is depth rated to 500m and designed to operate in the harshest operating conditions, ideally suited for asset integrity inspections and pipeline inspections using ROV. Dedicated software displays and logs thickness measurements from the ROV UTG on to a computer at the surface. The Cygnus Topside Repeater (TSR) is available as an option and has the facility to display the thickness measurements remotely and overlay them on to a video signal. This allows the measurements to be superimposed on the ROV camera’s monitor screen. Supplied with CygLink software to display and log thickness measurements from the ROV wall thickness gauge on a computer at the surface which can be saved to a file and printed out. CygLink has two data logging facilities Quick Log for simple recording of thickness measurements and Structured mode with four templates available Single Point, Multi Point, Grid Point and Key Point.

Torque Readout with built-in Transducer. The basic, easy-to-use readouts include a built-in torque transducer and has a variety of measurement modes including track, peak, pulse and click. The ReadStar TT can be used as a portable device or fixed permanently using the mounting bars. The new and improved torque tester incorporates a bigger and clearer OLED screen display to view readings and results and the redesigned, easy to use keypad offers a familiar feel with simple function keys to effortlessly switch between modes and settings. The new internal memory now allows for a massive 999 readings to be stored and the addition of a new micro USB port allows for a wider range of connections for printing and exporting data. The new port also allows for additional power options. The ReadStar TT is supplied with a built-in transducer and a standard rundown adapter, and is available in 0.5Nm, 1Nm, 4Nm, 12Nm and 30Nm ranges. A premium joint kit is also available, sold seperately.

unprecedented opportunities thanks to newest 3D-print technology: whether ultra-stable up to 103°C/217,4°F heat-resistant plastic parts or elastical silicone up to 65 shore – we can meet your very special needs on a wide range – with a print resolution of up to 15 μm! Realizing ideas quickly: we print your prototypes, devices, models, sales samples, artworks or even final products made of plastics or silicone. For your individual 3d-print, we need your data-model in STEP- or STL-format. We are looking forward to your inquiries!

Our comprehensive scan service enables the precise conversion of physical objects into high-quality 3D models, laying the foundation for innovative projects. State-of-the-Art 3D Scanning Technology: Utilizing cutting-edge technology, we ensure accurate digital reproductions of physical objects. With precision and detail, we capture the finest structures for the highest quality digital models. Adaptability to Various Objects and Materials: Our flexible 3D scan service is suitable for diverse objects and materials, offering versatile scanning solutions tailored to your individual requirements. Precision Data Capture for 3D Printing and Modeling: The captured data is perfectly aligned with the demands of 3D printing and modeling, ensuring seamless integration into the manufacturing process.

We offer a wide range of cash register paper rolls, made from the highest quality thermal paper for a clear and long-lasting print. All rolls of ROLTECH thermal paper for cash registers are equipped with an indicator at the end of the roll to ensure a better record of paper consumption. In our portfolio you can ond rolls compatible with the latest models of cash registers and printers. Avoid cash register jams and make clear printing with ROLTECH brand thermal paper rolls! Order the highest quality cash register rolls with a guarantee of up to 10 years for the legibility of the data printed on the paper and end of roll marker. On request, we customize the cash register rolls with color or black-and-white messages printed on the back with: logos, images, promotional messages, etc.

The POS (Point-of-Sale) is an electronic device that can retrieve, store and transmit card payment information. This device is found at the cash registers of stores and through which you can make card payments. All POS issues paper-based information about the transaction and therefore the quality of the printing paper plays an important and essential role in the day-to-day operation of the store. ROLTECH thermal paper meets all quality standards and provides the necessary support for a correct and long-lasting print. ROLTECH thermal paper rolls are compatible with POS Ingenico, VeriFone, Hypercom Optimum, Sagem, used by most banks for the operation of card payments. Order the highest quality cash register rolls with a guarantee of up to 10 years for the legibility of the data printed on the paper and end of roll marker. On request, we customize the cash register rolls with color or black-and-white messages printed on the back with: logos, images, promotional messages, etc.

Fully automatic labelling machine for labelling drums in accordance with the GHS Directive. All chemicals are subject to mandatory classification and labelling before they are placed on the market, and they are often marketed in drums and hobbocks of various sizes. This places increased demands on the flexibility of the labelling unit in terms of print data, multi-colour printing and application height (labelling height). Often, several labels are applied to the circumference of the keg (product label, hazardous goods label(s) and logistics label. For this purpose, the system can be equipped with several label dispensers and/or several printing and dispensing systems. Labelling can be carried out in continuous operation or at a standstill. Depending on the application and labelling requirements, the labelling system can also be positioned at a drum labelling station.

To serialize vials and other cylindrical products, we rely on the proven quality and reliability of our labelers. In order to achieve the best possible grading of the serialisation barcodes, we integrate thermal transfer printer or marking laser units directly on the label applicator. The vision system immediately inspects the print data after the printing process. If the inspection shows a negative result, we optionally offer a label reject station which automatically removes the label from the process and therefore does not waste a „good product“. Both the vision system and the print engine are fully integrated in the touch panel HMI. Shift registers in the label applicator as well as in the complete system enable product and label tracking through the complete system.

The workstation enables the manual serialisation of pharmaceutical packs and their aggregation into shipping cartons. For this purpose, each individual box is first printed with order-related serialisation data by a thermal inkjet printing system and then manually placed in a shipping carton. As soon as this is filled, the downstream thermal transfer printer creates an individual serialisation label. The correct print data and print quality are monitored by a camera system. The operator places the drug packs to be labelled at a reference edge of the conveyor belt. As soon as the printer has printed the serialisation data, it is checked for correctness by the integrated image processing system. In case of an error, the product stops at a certain position, which is marked by red LEDs. Depending on the number of products in the shipping carton/number of aggregation levels, approx. 10-12 products/min are serialised.

This workstation enables the manual serialisation of drug packages and their aggregation into shipping cases. For this purpose, each individual box is first printed with order-related serialisation data by a thermal inkjet printing system as it passes by and then manually placed in a shipping carton. As soon as it is filled, the downstream thermal transfer label printer creates an individual serialisation label. The correct print data and print quality are permanently monitored by a vision system. The operator places the medicine products to be serialized on a reference edge at the infeed. As soon as the thermal inkjet printer has printed the serialisation data, the integrated vision system checks that the data is correct. If an error is detected (e.g. insufficient grading), the product stops at a certain position marked by red LEDs. The removal of the rejected product must be confirmed by pressing a button on the HMI.

The LSS-PV model was developed to serialize small product batches cost-effectively and according to the requirements of country-specific FMD guidelines. The products are fed manually. A transport system with product carriers guarantees a precise and continuously accurate alignment of the products. After the printing process performed by a thermal inkjet printing system (TIJ), the print data is inspected. If the inspection result is positive, the products are either collected on the collection table at the outfeed of the system or glide over an optionally available transfer plate into an outer shipping case. Defective products are reliably separated from the GOOD products by the product reject station. This process is verified twice in the PLC.

This powerful HSF friction feeder is the optimal solution when empty folding boxes have to be marked with variable data offline from the production line. The modular design of the system enables an easy integration of the desired marking technology. The HSF separates the folding boxes from the stack in the infeed magazine. The cartons are guided to the printing station by two parallel running belt conveyors. Print information could be e.g. serialisation data in the form of bar codes or data matrix codes and text. Depending on requirements, thermal inkjet, laser coders or label print- and apply systems can be used (also in combination). The printed data is inspected and verified by an integrated vision system. The b+b Linemanager recognized all 21CFR Part 11 data for each serial number and is able to report this back to the Siteserver system (e.g. b+b Siteserver).

The latest generation of REA JET GK 2.0 high-resolution coding and marking systems using piezo technology is suitable for direct, high-contrast coding and marking on absorbent and porous surfaces, such as wood, cardboard and paper, with a variable print height of up to 100 mm. Applications: — Porous and absorbent surfaces: paper, cardboard boxes, wood, textiles, fleeces, building materials, polystyrene, grinding wheels etc. — Variable print data such as date, time, counter, shift code or database content — Alphanumeric texts, barcodes, data matrix codes, logos, warning notes — Coding and marking of packaging — IPPC coding and marking on pallet blocks — EPAL coding and marking of pallets — CE marking on wood — Marking of paper sacks — All-round coding and marking of fiber drums — Marking of OSB panels with logo — Coding and marking of pallet boxes — Marking of gypsum boards or board stacks with large logos — Serialization and track & trace applications

The requirements for product labelling are increasing and becoming more and more diverse. Track and Trace, product tracing, quality assurance, GS1 regulations require secure and reliable application of variable data. This applies to almost all industries, whether logistics, pharmaceuticals, food industry or chemicals such as agrochemicals. ​When printing variable data such as graphics or Data Matrix, barcodes, QR codes and comparable code types, uncompromising quality must be implemented. ​The EDS 420i and EDS 620i printing and dispensing systems are designed for industrial use and enable you to label your products and their packaging precisely, reliably and quickly using different applicators and label transfer modules. The modular design of the systems was the main focus in the development of the printing and dispensing systems

s with the MS-PV-AG model, the products are fed manually by the operator. Product carriers and adjustable guide rails ensure a stable product transport. As soon as the thermal inkjet printer has printed the serialisation data, the integrated vision system checks that the data is correct. If an error is detected (e.g. insufficient grading), the product is removed from the process and fed to a lockable collection box. It is not taken into account during the formation of the aggregation pedigree and is ejected and marked in the shift register as soon as the error is detected. As soon as the filling quantity per carton is reached according to the specified packing scheme, the system automatically generates a serialized label for the shipping carton. It is applied manually by the operator and confirmed by a handheld scanner that the aggregation label has been applied.

The PAE range is an innovative new generation of pallet labellers that can label pallets on up to three sides with either pneumatic and/or electric traversing axles. The labels are printed with individual data in real time immediately before dispensing. The series is designed to integrate thermal transfer printing modules from different manufacturers. Automatic height adjustments are available as an option in order to Application heights on the pallet to start up. The complete traceability of products is essential nowadays, which is why interest in intelligent pallet labelling processes is so high. The system can handle label formats up to DIN A4 format, enabling product labelling according to the global GS1 standards.

Ready for world wide use — Full Unicode support: all global languages can be printed for companies with international customers — Support of all True Type Fonts (TTFs): maximum design flexibility for your print — XML-based data structure and communication protocol: globally used standard for data compatibility — Sturdy and high-quality stainless-steel casing designed for daily work in rough industry environments — 24V power supply: for direct integration into machines and systems

* 122 types of diagnostic reports * Automatic arrhythmia detection and report * Reporting in DICOM, BMP, JPG, PDF, SCP-ECG, FDA-XML formats * Can be integrated into HBYS system * Handwriting of patient data * Monitoring and printing of 600 seconds ECG waveforms * Pace-maker detection

Patients from the fields of orthopaedics, neurology or geriatrics often need to work on a consistently smooth gait pattern. The BIODEX Gait Trainer 3 offers the suitable training options for all groups of patients. Motivation through feedback With the BIODEX Gait Trainer 3, patients acquire a smooth gait pattern. In addition, balance, coordination, endurance and the cardiovascular system are trained. Work on the treadmill strengthens the leg muscles. On the screen or via an audio message, the patients and therapists receive direct feedback on the smoothness of the gait pattern. The therapists can then make corrective interventions if necessary and the patients are motivated. Data for the clinic IT Running speed, step length and step frequency can be tested and compared with reference values. The training results and follow-up are documented completely and can be saved and printed out. Data export is ensured by an optional software module. Thus, all the important data is...

LEIBINGER is offering its customers a straightforward and cost-effective option for quickly and reliably checking the product marking applied by a LEIBINGER inkjet printer in the form of its V-check vision system. V-check does this by automatically comparing printed data such as letters, digits, logos or images against a reference sample, guaranteeing high production reliability.

With the production planning program JETedit3 you can create print jobs and graphics for the inkjet printer LEIBINGER JET3 even at your desk, far away from the printer. Is the printing data for the particular job created, it is saved and it can be transferred via Ethernet or RS232 connection to up to 16 JET3 printers. The transfer of jobs and data from machine to machine by USB-stick is not necessary anymore.

Typical application examples for WINJET3 Mailing include addressing packages as well as printing lottery numbers on raffle and lottery tickets. The software sends variable print data to one or multiple printers. Furthermore, the Mailing version includes all advantages of the WINJET3 Standard software: Up to 16 LEIBINGER JET3up inkjet printers can be controlled and monitored centrally from one computer.

The LEIBINGER JET2neoEP continuous inkjet printer is the easy and reliable marking and coding solution for standard applications in the egg industry. The JET2neoEP reliably marks and codes eggs and egg cartons within the egg sorting machines. Compatible with egg sorting and packaging machines from the leading manufacturer Moba Group » Easy and complete integration with plug-and-play connection » Approved installation kits for Moba and Diamond egg sorting machines » Automatic creation and modification of print jobs using the egg sorting machine‘s control system or a manual solution at the printer » Accurate printing for each egg » Highly accurate printing on the egg or egg carton » Central print data management » Best before date and other variable data are updated automatically » Option to mark and code the packaging before or after filling it » Marking and coding imprint can be changed conveniently in the event of multiple customers

To meet the tough demands of industrial applications, the high-performance, durable tabletop printers of the 64-series are most ideal. With a print speed of up to 400 mm/sec, the 64-series printers operate faster than any other printer in the marketplace and therefore become the best choice for increasing productivity and reducing expensive operator time for printing labels. Our 64-series printers are dedicated to printing barcodes, fonts and logos on any label material in excellent quality. Unique standard features, such as ribbon save, 600 meter ribbon rolls, print width up to 203 mm (8 inch) and print speed up to 400 mm/sec deliver immediate cost saving without compromising on print quality. The standard data interfaces like Ethernet and USB enable easy integration into existing processes and internal networks in any industry and location.