Pressure measurement - Import export

Bourdon tube pressure gauges Stainless steel, polypropylene or phenolic Wetted parts AISI 316L or monel Dial size: 63 mm,100 mm to 160 mm Ranges from -1...0 to 0...1600 bar Solid front, safety version S3

The compact ECO2-Ei digital manometers are budget-friendly and provide a good resolution. The minimum or maximum value since the last reset can be displayed at the same time as the current pressure value in a wide variety of units of pressure. The swivel adapter allows the device to be optimally positioned. Power is supplied by a conventional CR2430 coin cell battery (provided). Intrinsically safe – suitable for use in explosive atmospheres.

The compact LEO2-Ei digital manometers are budget-friendly and provide high accuracy. The minimum or maximum value since the last reset can be displayed at the same time as the current pressure value in a wide variety of units of pressure. The swivel adapter allows the device to be optimally positioned. Power is supplied by a conventional CR2430 coin cell battery (provided). Intrinsically safe – suitable for use in explosive atmospheres.

The LEO1-Ei digital manometers have a measuring interval of 5000 individual measurements per second, which allows them to record fast pressure peaks. The minimum or maximum value since the last reset can be displayed at the same time as the current pressure value in a wide variety of units of pressure. Power is supplied by a conventional CR2430 coin cell battery (provided). Intrinsically safe – suitable for use in explosive atmospheres.

The high precision of the LEX1-Ei digital manometers makes them ideally suited to calibration and test applications. The minimum or maximum value since the last reset can be displayed at the same time as the current pressure value in a wide variety of units of pressure. Power is supplied by a conventional CR2430 coin cell battery (provided). Intrinsically safe – suitable for use in explosive atmospheres.

The LEO3 digital manometers also output the pressure values as an analog signal for display purposes and have an RS485 interface for integration in bus systems and communication with computers. The current 4...20 mA measured value is shown on the display at the same time as the pressure value. The minimum or maximum value since the last reset can also be displayed at the touch of a button. Power is supplied directly via the 4...20 mA circuit.

The compact ECO2 digital manometers are budget-friendly and provide a good resolution. The minimum or maximum value since the last reset can be displayed at the same time as the current pressure value in a wide variety of units of pressure. The swivel adapter allows the device to be optimally positioned. Power is supplied by a conventional CR2430 coin cell battery (provided).

The compact LEO2 digital manometers are budget-friendly and provide high accuracy. The minimum or maximum value since the last reset can be displayed at the same time as the current pressure value in a wide variety of units of pressure. The swivel adapter allows the device to be optimally positioned. Power is supplied by a conventional CR2430 coin cell battery (provided).

The LEO1 digital manometers have a measuring interval of 5000 individual measurements per second, which allows them to record fast pressure peaks. The minimum or maximum value since the last reset can be displayed at the same time as the current pressure value in a wide variety of units of pressure. Power is supplied by a conventional CR2430 coin cell battery (provided).

The high precision of the LEX1 digital manometers makes them ideally suited to calibration and test applications. The minimum or maximum value since the last reset can be displayed at the same time as the current pressure value in a wide variety of units of pressure. Power is supplied by a conventional CR2430 coin cell battery (provided).

The high-accuracy LEO-Record-Ei digital manometers can record pressure and temperature autonomously for long periods thanks to their memory function. The data logger can be connected to a computer via the RS485 interface for configuration and for reading out the recorded data. The current pressure value can be displayed in a wide variety of units of pressure. Power is supplied by a high-quality 3,6 V lithium battery. Intrinsically safe – suitable for use in explosive atmospheres.

Measurement using the impact pressure method Measuring range 0 – 0.5 mWS Connection via polyamide flange with quick-action elbow gland Enclosure rating IP 67 Including 5 metres of rigid PU hose (Ø 8 mm)

The DCT 531P was designed for use in the food / beverage and pharmaceutical industry. The compact design with hygienic versions guarantees an outstanding performance in terms of accuracy, thermal behaviour and long term stability. The integrated RS485 interface is characterized by a robust and reliable data transmission that works failure-free even over long distances. Additionally, the modular construction concept of the device allows to combine different electrical and mechanical connections. Features: — nominal pressure: 0 ... 100 mbar up to 0 ... 400 bar — accuracy: 0.25% FSO — output signal: RS485 with Modbus RTU protocol — CIP / SIP cleaning up to 150 °C — diaphragm with low surface roughness — reset function — ingress protection IP 67 / IP 69 Optional Features: — different process connections — cooling element for media temperatures up to 300 °C

Different types of pressure transmitters exist: differential pressure transmitter for measuring a pressure difference ΔP but also a relative or absolute pressure transmitter. For more specific applications, it will be necessary to use: a differential pressure transmitter to correct variations of pressure and temperature of a gas two transmitters for the same differential pressure flow element to increase the measuring range For more details on these cases, please see the Frequently Asked Questions tab on this page.

The annular chamber (carrier rings) is proposed for orifice plates, for venturis and for nozzles. It has several advantages: it favors the circulation of the fluid over the complete circumference of the pipework and offers a more stable and precise averaged pressure; in the case of the orifice plate, it also allows to change only the plate in case of maintenance or change of process compared to a monoblock where the complete system must be changed. This type of mounting is particularly recommended for pipe diameters smaller than DN50.

The 3D diaphragm pressure gauge is used to measure the pressure of neutral and aggressive media. The manometer is hermetically separated from the media by a diaphragm made of PTFE-TFM 1700 to protect it against the corrosive affects of the media. The pressure is measured through a buffer fluid that transfers the pressure onto the measuring chamber of the manometer. The large surface of the diaphragm ensures high-precision measurement results.

The pressure switch P01 has been designed especially for use in mobile machines. The EMC characteristics as well as the impact and vibration resistances have been designed for this field of application. This facilitates their use in adverse ambient conditions such as can be found in mobile hydraulics. The integrated electronic switches (NPN or PNP) can be preconfigured ex-works. The P01 is available for pressure ranges from 0...10 bar to 0...1200 bar, whereby a switching accuracy of 1 % of the measurement range end value can be achieved. The maximum permitted media temperature totals 150 ºC; the ambient temperature totals 125 ºC. The parts coming into contact with media have been produced from stainless steel (1.4548) and guarantee, in combination with the welded thin-film measurement cell, maximum media compatibility. Optionally, a damping device can be integrated into the media access.

The M01 series has been especially designed for applications in adverse ambient conditions in the same way value is placed on high resistance to aggressive media. Furthermore, the modular principle permits many combinations of pressure connection, pressure range, output signal and connector, so that the right sensor can be found for most applications. For pressure ranges from 10 to 2000 bar, which are frequently required for use on mobile machines, welded stainless steel measurement cells are used which are suitable for media temperatures from −40 to +150 °C. Depending on the type of measurement cell and the material coming into contact with the media, the M01 is resistant to aggressive/non-aggressive gases and liquids. On request, versions in 316L design for use in hydrogen pressure measurements are available. In addition to CE and UL certificates, every M01 product with a 1.4542 stainless steel measurement cell possesses an E1 approval verifying its suitability for use in vehicles.

The Pressure Switch F01 fulfils the high requirements of the EN13849-1 Machinery Directive. The F01 can be used for systems with Performance Level PL d and for safety-critical applications. The F01 has an E1 approval. The F01 is available for pressure ranges from 10 to 1200 bar and has two switching outputs which switch inverted to each other. The F01 is also available with one switching and one analog output. The current output is read back by the F01 to ensure the output signal is emitted correctly. To be able to use the F01 in many applications, users can select different pressure connections. The electrical contact takes place via a 5-pole M12 connector. Through the calibration of the transmitter via temperature, a total accuracy of 1 % FS can be achieved within a range of 0...80 °C. The maximum media temperature totals +125 °C. The stainless steel parts coming into contact with media guarantee maximum media compatibility in combination with the welded thin-film measurement cell.

"Kombibar" Combined pressure measurement device Features: Combination of diaphragm seal technology with pressure transmitter and mechanical gauge A wide range of variations can be realized All process connections of LABOM´s diaphragm seal portfolio available Redundant measurement of 2 devices in one process connection Options: Explosion protection for gases Optional with switch function

The pressure transmitters of the 9LD series use the chip-in-oil technology developed by KELLER, uniting a pressure measuring cell, digital temperature compensation and signal processing in a compact housing made of stainless steel or Hastelloy. The transmitters are extremely resistant to environmental influences and delivery highly accurate measurement results as a digital output signal. The I2C interface and the low supply voltages make it easy to integrate in microcontroller-based systems. The extremely low power consumption is ideal for battery-operated devices. The D line is perfect for IoT solutions.

The pressure transmitters of the 9LC series use the chip-in-oil developed by KELLER, uniting a pressure measuring cell, digital temperature compensation and signal processing in a compact housing made of stainless steel or Hastelloy. The transmitters are extremely resistant to environmental influences and deliver compensated measurement results as an analog, ratiometric 0,5...4,5V output signal over a wide temperature range.

The pressure transducers of the PD-10L series have been developed to measure differential pressure. These OEM pressure transducers have a single silicon diaphragm in their interior, which is pressurised from both sides and measures the pressure difference directly. This design enables them to measure tiny pressure differences even at an extremely high line pressure.

Pressure gauge and thermometer are suitable for the various pressure and temperature measurement applications. We offer solutions for gas and liquid measurements. The range covers capsule, plate or Bourdon-tube pressure gauges and measuring instruments made from various materials with versions extending from standard models to stainless steel versions, for use in corrosive environments, and electronics measuring equipment.

Pressure gauge and thermometer are suitable for the various pressure and temperature measurement applications. We offer solutions for gas and liquid measurements. The range covers capsule, plate or Bourdon-tube pressure gauges and measuring instruments made from various materials with versions extending from standard models to stainless steel versions, for use in corrosive environments, and electronics measuring equipment.

Pressure gauge and thermometer are suitable for the various pressure and temperature measurement applications. We offer solutions for gas and liquid measurements. The range covers capsule, plate or Bourdon-tube pressure gauges and measuring instruments made from various materials with versions extending from standard models to stainless steel versions, for use in corrosive environments, and electronics measuring equipment.

Pressure gauge and thermometer are suitable for the various pressure and temperature measurement applications. We offer solutions for gas and liquid measurements. The range covers capsule, plate or Bourdon-tube pressure gauges and measuring instruments made from various materials with versions extending from standard models to stainless steel versions, for use in corrosive environments, and electronics measuring equipment.

Pressure gauge and thermometer are suitable for the various pressure and temperature measurement applications. We offer solutions for gas and liquid measurements. The range covers capsule, plate or Bourdon-tube pressure gauges and measuring instruments made from various materials with versions extending from standard models to stainless steel versions, for use in corrosive environments, and electronics measuring equipment.

Pressure gauge and thermometer are suitable for the various pressure and temperature measurement applications. We offer solutions for gas and liquid measurements. The range covers capsule, plate or Bourdon-tube pressure gauges and measuring instruments made from various materials with versions extending from standard models to stainless steel versions, for use in corrosive environments, and electronics measuring equipment.