Results for
NORELEM FRANCE
France
Coupling stainless steel 1.4057. Screws stainless steel 1.4301. For applications that require a small construction volume and low surface pressure. The keyless locking coupling can be fully recessed in a hub connection. for shaft diameters 6 20 mm suitable for hubs with low wall thickness minimum axial offset possible selfcentring Assembly Lightly oil keyless locking coupling on the tapered faces and contact points of the shaft and hub. Do not use MoS2 or grease. Insert keyless locking coupling in the hub seat and slide onto shaft. Tighten screws crosswise in several increments to the defined tightening torque. Dismantling Remove all screws and screw into the extraction threads of the front flange. Tighten screws crosswise in several steps until the keyless locking coupling loosens. Tolerances Shaft Recommended tolerance h8. Surface quality Rz ≤ 16 µm. Hub Recommended tolerance H8. Surface quality Rz ≤ 16 µm.
Request for a quoteHS UMFORMTECHNIK GMBH
Germany
DVK-HD® quick closure pipe couplings are ideal for a quick and safe mounting in pressure conveyors. The coupling is closed with two clamping levers, therefore a quick opening and closing of pipe connections is possible. The clamping lever can be locked in any desired position by a simple upward pull.
Request for a quoteEC PLAZA
South Korea
Product Descriptions 1) TOTAL 8 Types : GRIP-S / GRIP-L / FLEX-S / FLEX-L / DOUBLE-S / DOUBLE-L / HINGE-S / HINGE-L 2) Size : 15, 20, 25, 32, 40, 50, 65, 80, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500, 550, 600, 650, 700, 750, 800, 850, 900, 1000 3) Applications - All types of pipes for water supply lines or various industries. - Used for connection between pipes or emergency repair of pipe-lines. 4) Materials : Stainless steel CF8 & CF8M 5) Working Pressure : 10 bar Features - HISTEN Couplings are designed to maximize flow with minimum pressure loss. - Stainless steel body with High quality sealing materials and optimized design prevent fluid leakage. - Easy and quick installation for general piping application or emergency repair. - Various rubber packing materials are applicable in accordance with different fluids and conditions. - No welding, no heavy tools required, and can be applicable to various pipe materials. - Holds own patents related to the Gasket
Request for a quoteHS UMFORMTECHNIK GMBH
Germany
DVK-HD® high pressure pipe couplings are perfect for a quick and well-priced mounting for pressure conveyors. They have the following characteristics: for outer pipe diameter from 60.3 to 206.0 mm length: 100, 150, 200 mm or longer metal casing made of aluminium AlMgSi 0.5 F22 massive aluminium clamps (double secured) screws M12 with massive threaded bars pressure-resistant up to maximum of 12 bar (see table) vacuum-resistant up to maximum of 0.8 bar (see table) circular version, therefore very easy to mount white EPDM gasket or nitrile gasket, temperature-resistant and food-safe optionally available with silicone gasket (-60°C to +200°C) Mounting these pipe couplings is safe and hazard-free because no welding works are necessary. They also can easily be dismantled – connecting pieces and pipes can be reused.
Request for a quoteGUMMIWARENFABRIK EMIL SIMON GMBH & CO. KG
Germany
We produce hoses and technical hose products for many well-known engine and vehicle manufacturers in dimensions from 10 to 250 mm at any length and various working pressures. COUPLING Pressure-resistant hose elements as a straight connector or de-coupling element in pipelines for pressures up to 20 bar. SPIRAL HOSE Suction and pressure-resistant versions from -0.9 bar to +20 bar, with or without cuffed ends. Can also be laid in narrow radiuses. CHARGE AIR HOSE As an industrial hose, hose elbow or corrugated spiral hose for suction and pressure lines. As bellows with external metal rings in the pressure area. HOSE ELBOWS Stable shape connecting elements, either for suction and/or pressure in any geometry. Other versions and dimensions on request.
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
Female couplings with hose stem With one handle material: modular graphite cast iron/steel, galvanized Category Low pressure hoses and fittings / Mortar couplings and accessories / Sockets / With hose sleeve 1-lever / Binding hydraulic Product number supplier 332014221
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
Category Low pressure hoses and fittings / Industrial couplings / Tank truck-couplings / Tension ring lever / Stainless steel Product number supplier 330500055v
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
Category Low pressure hoses and fittings / Industrial couplings / Tank truck-couplings / Tension ring lever / Brass Product number supplier 330500055
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
Female couplings with hose stem With one handle material: modular graphite cast iron/steel, galvanized Category Low pressure hoses and fittings / Mortar couplings and accessories / Sockets / With hose sleeve 1-lever / Binding hydraulic Product number supplier 332014221
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
Female couplings with hose stem With one handle material: modular graphite cast iron/steel, galvanized Category Low pressure hoses and fittings / Mortar couplings and accessories / Sockets / With hose sleeve 1-lever / Binding normal Product number supplier 332014211
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
Female couplings with hose stem With one handle material: modular graphite cast iron/steel, galvanized Category Low pressure hoses and fittings / Mortar couplings and accessories / Sockets / With hose sleeve 1-lever / Binding normal Product number supplier 332014211
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
Male couplings from brass for water Distance between lugs 40 mm, gasket from Perbunan material: forged brass MS 58 Category Low pressure hoses and fittings / Claw couplings and accessories / Hose couplings with external thread / Brass Product number supplier 330163940
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
Hose couplings from brass for water Distance between lugs 40 mm, gasket from Perbunan material: forged brass MS 58 Category Low pressure hoses and fittings / Claw couplings and accessories / Couplings with hose connection / Hose couplings / Brass Product number supplier 330153840
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
Hose couplings from brass for water Distance between lugs 40 mm, gasket from Perbunan material: forged brass MS 58 Category Low pressure hoses and fittings / Claw couplings and accessories / Couplings with hose connection / Hose couplings / Brass Product number supplier 330153840
Request for a quoteGLOBAL GASES GROUP THAI CO LTD
Thailand
WIDE COMPATIBILITY — R134A refrigerant recharging hcse kit fits for R134A R12 or R22 refrigerant refrigerant to vehicle or home air-conditioning, with highly working performance. m PREMIUM QUALITY — R134A can tap, R134A low side quick coupler are made of aluminium alloy, mini split adapter fitting is made of brass altoy for high heat resistance durability and safety. m EASY INSTALLATION — Push & lock coupler with auto shut off, easy and convenient to use. Come with gauge for easily viewing during use and getting a correct charge. m DIMENSION — 1/2" female x 1/4" SAE male can tap opener, 59'length recharge hcse, 13mm R134A Low Pressure quick couple, 2.7' length gauge, R410A mini split adapter with 5/16" SAE female x 1/4’ SAE male thread. PACKAGE INCLUDES —- R134A air conditioning refrigerant charging hose with gauge. 1Pc R134A can opener, and R134A quick coupler. 1/4’’ SAE M to 5/16*F R410A Straight Adapter.
Request for a quoteHENSE SYSTEMTECHNIK GMBH & CO. KG
Germany
Thanks to a wide range of accessories, Hense operators can be individually configured for a wide variety of applications and optimally matched to the function of the overall system. To ensure perfect and safe operation, we are on hand to help you select and optimally coordinate all components.Servo valves, proportional valves and switching valves with different nominal sizes Pulsation damper for smoothing vibrations and uneven flow rates Subplates for positioning valves and pulsation accumulators close to the motor High-resolution rotation angle sensors that are coupled directly to the swivel motor shaft by means of a torsionally rigid coupling Pressure sensors Torque measuring shafts or reference torque measuring disks Clamping sets, shrink disks or profiled hubs for torque transmission Torsionally rigid couplings for reliable torque transmission with simultaneous shaft displacement Angled flanges for mounting the swivel motors parallel to the axis
Request for a quoteAVK REWAG
Netherlands
The Repico® Grip type coupling is designed to replace traditional pipe joining methods (welded, flanged, threaded, etc.). The Grip type pipe coupling offers a tensile or restraint connection between the pipes. This means that there is a leak free connection made and the pipes are held in position inside the coupling. A grip ring holds the pipe within the coupling. Of course any type of pipe material that can withstand the sealing pressure of the coupling can be connected. Note that there are different versions for metallic and plastic pipes. No special tools or skilled people are required to install the Repico® product program. The pipe ends only need to be deburred and cleaned. The bolts tightened evenly and torqued with a torque wrench ensures a secure and durable connection. The Repico® grip range has the following types: GLP, GMP, G, GF, please see their specifications in the separate sections.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
TECNORULLI S.R.L. CON SOCIO UNICO
Italy
Steel rollers with jacket consisting of tube and bearing mounting head rigidly coupled by pressure. They are mounted on pre-lubricated angular or radial ball bearings protected with double-labyrinth dust seals. Clamped steel rollers are used in belt conveyors with limited or medium-heavy loads. The diagrams and tables on page 34 show the dimensional characteristics and maximum loads. Operating temperature:-10 ÷ +90 [°C].
Request for a quoteWITTE PUMPS & TECHNOLOGY GMBH
Germany
The CHEM gear pump series was developed especially for the requirements of the chemical industry. The series is used for pumping and transferring low to medium viscosity media. The CHEM series is extremely flexible in its design and areas of application. Technical details: — Suction pressures from vacuum up to 15 bar and suction pressures with magnetic coupling up to 25 bar — Delivery volume 1.28 cc/rev to 12,000 cc/rev — Temperatures up to 300 degrees — As special pumps for the chemical industry according to customer specifications — Viscosities up to 1.000.000 mPas
Request for a quoteROTORSTECH
Slovakia
The range of PK compressors includes the following models: PK-1.75A, PK-3.5A, PK-3.5AM, PK-5.25A. Compressors of this series are used both as part of compressor stations and installations with diesel and electric drive, and as brake compressors for railway rolling stock. •High efficiency and productivity. •Excellent price/quality ratio. •Long period of use •Ease of maintenance •Low lube oil consumption/ Basic delivery set: •Compressor •Heat exchangers •Fan •Safety valves •Driven half-coupling •Air filter •Spare parts kit Additional equipment: •Tubular electric heaters •Transition housings •Manometers and emergency pressure sensors •Leading half-coupling for connecting the electric motor
Request for a quoteSPX FLOW EUROPE LTD - THE NETHERLANDS
Netherlands
WIND TENSIONERS Our tensioners have quality designed in with standard features that enhance durability and efficiency to get the job done faster and safer: Quality Means Lower Life-Cycle Costs: Achieves 90% proof load requirement for ISO 898 Grade 10.9 bolts Fully enclosed load cell eliminates debris in piston retraction mechanism Auto-Engaging Geared Nut Rotator Self-energizing, long life seals Enhanced Usability: Piston stroke limit indication High pressure swivel coupling (swivel is optional on WSS & WSL) 19,580 psi (1,350 bar maximum operating pressure) Automatic piston retraction mechanism Designed with Safety in Mind: Overstroke prevention for safe operation Anti-slip grip surface Tool lifting-strap as standard WDD UP TOWER WIND TENSIONERS Robust Gearbox Drive Auto-Engaging Geared Nut Rotator Small diameter, high load 2-Stage hydraulic load cell Fast application using 1/2" drive Cycle counter optional (Add “A” to end of part number) Max Pressure: 19,580 psi (1,350...
Request for a quoteSPX FLOW EUROPE LTD - THE NETHERLANDS
Netherlands
WIND TENSIONERS Our tensioners have quality designed in with standard features that enhance durability and efficiency to get the job done faster and safer: Quality Means Lower Life-Cycle Costs: Achieves 90% proof load requirement for ISO 898 Grade 10.9 bolts Fully enclosed load cell eliminates debris in piston retraction mechanism Auto-Engaging Geared Nut Rotator Self-energizing, long life seals Enhanced Usability: Piston stroke limit indication High pressure swivel coupling (swivel is optional on WSS & WSL) 19,580 psi (1,350 bar maximum operating pressure) Automatic piston retraction mechanism Designed with Safety in Mind: Overstroke prevention for safe operation Anti-slip grip surface Tool lifting-strap as standard WSS & WSL FOUNDATION WIND TENSIONERS Suitable for ISO Metric threaded and all-thread bars Geared or Manual Nut Rotator Long & short stroke models Maximum operating pressure 19,580 psi (1350 bar) Uses standard system 'nut' for reaction Contact factor for op
Request for a quoteSPX FLOW EUROPE LTD - THE NETHERLANDS
Netherlands
WIND TENSIONERS Our tensioners have quality designed in with standard features that enhance durability and efficiency to get the job done faster and safer: Quality Means Lower Life-Cycle Costs: Achieves 90% proof load requirement for ISO 898 Grade 10.9 bolts Fully enclosed load cell eliminates debris in piston retraction mechanism Auto-Engaging Geared Nut Rotator Self-energizing, long life seals Enhanced Usability: Piston stroke limit indication High pressure swivel coupling (swivel is optional on WSS & WSL) 19,580 psi (1,350 bar maximum operating pressure) Automatic piston retraction mechanism Designed with Safety in Mind: Overstroke prevention for safe operation Anti-slip grip surface Tool lifting-strap as standard WSD COMPACT TOWER WIND TENSIONERS Robust Gearbox Drive Auto-Engaging Geared Nut Rotator Low height hydraulic load cell Fast application using 1/2" drive Cycle counter optional (Add “A” to end of part number) Maximum operating pressure 19,580 psi (1350 bar) Twin...
Request for a quoteWALTER STAUFFENBERG GMBH & CO. KG
Germany
Description The multi-coupling has been created for connecting and disconnecting several hydraulic lines at the same time. This is done by an operating lever the guide crank of which is designed for a minimum of operating force. The connection of the hydraulic lines is done with flat face couplings. Due to the secial sealing it is possible to couple against trapped pressure on the male halves (max. 4x100 bar/ 5802 PSI) The main features of the multi coupling are: · Safety against commutability of hydraulic lines · Quick connecting · Coupling against trapped pressure · Optimally minimized leakage during coupling process Working Pressure 250 bar / 25 MPa / 3626 PSI Material Steel Surface Finishing Zinc-Nickel Standard Seal Material(s) NBR (Buna-N®), PTFE, PU
Request for a quoteOMEGA AIR
Slovenia
B-AIR™ point of use filter set is designed for high efficient preparation of top quality breathing air. On request B-AIR™ filter set can be supplied with wall mounting brackets, pressure regulator and quick couplings. WARNING! Breathing air filter set B-AIR is not declared as CO₂ and CO removal filter. Despite that B-AIR comprises filter element which can reduce CO content.
Request for a quoteWALTER STAUFFENBERG GMBH & CO. KG
Germany
Test Couplings with ball check for normal hydraulic applications and hydraulic applications with high-viscosity fluids. Area of Application ▪ Monitoring and control of pressure ▪ Venting ▪ Sampling in high- and low-pressure systems Advantages ▪ Coupling at system pressure level ▪ Leakproof connection before ball valve is open ▪ Simple connection to measuring, control and switching devices ▪ Self locking metal guard cap Media ▪ Suitable for hydraulic oils and other mineral oil based fluids (Check compatibility of sealing material) ▪ For use in conjunction with other liquid or gaseous media please consult STAUFF ▪ In case of ultimate tightness requirements for gaseous media, a special Gas-type is available Working Pressure ▪ Max. working pressure 630 bar / 9137 PSI For SMK style G and K the recommended working pressure of fitting manufacturer has to be applied. ▪ Joining under pressure up to 400 bar / 5801 PSI max. Materials Metal parts made of: ▪ Steel, zinc/nickel-plated = C6F...
Request for a quoteWALTER STAUFFENBERG GMBH & CO. KG
Germany
Test Couplings with piston valve for: ▪ Hydraulic applications with low-viscosity fluids (e.g. water, cooling lubricants, etc.) ▪ For high, pulsating pressures ▪ For customer philosophy “Soft sealing / non metal to metal seal” ▪ Pneumatic applications ▪ Natural gas applications with DVGW requirement SKK-DVGW ▪ Other gas applications without DVGW requirements SKK-GAS ▪ Filling (flow in opposite direction) SKK-FÜLL Area of Application ▪ Monitoring and control of pressure ▪ Venting ▪ Sampling in high- and low-pressure systems ▪ Filling of accumulators (special filling-version) Advantages ▪ Coupling at system pressure level ▪ Leakproof connection before ball valve is open ▪ Simple connection to measuring, control and switching devices ▪ Self locking metal guard cap Media ▪ Suitable for hydraulic oils and other mineral oil based fluids (Please pay attention to the sealing materials used) ▪ For use in conjunction with other liquid or gaseous media please consult STAUFF ▪ In case of...
Request for a quoteWALTER STAUFFENBERG GMBH & CO. KG
Germany
Adjustable Gauge Fitting EMV ▪ Fixed mounting of a pressure gauge without a test coupling ina existing port connection Materials - Metal parts made of: ▪ Steel, zinc/nickel-plated = C6F (CrVI-free) ▪ Stainless Steel V2A (1.4305 / AISI 303) or V4A (1.4571 / AISI 316Ti) on request Sealings made of: ▪ P = NBR (Buna-N®) or V = FPM (Viton®) Gauge Adaptor SMA Direct Gauge Adaptor SMD
Request for a quoteWALTER STAUFFENBERG GMBH & CO. KG
Germany
Test Couplings with ball check for normal hydraulic applications and hydraulic applications with high-viscosity fluids. Area of Application ▪ Monitoring and control of pressure ▪ Venting ▪ Sampling in high- and low-pressure systems Advantages ▪ Coupling at system pressure level ▪ Leakproof connection before ball check is open ▪ Simple connection to measuring, control and switching devices ▪ Self locking metal guard cap Media ▪ Suitable for hydraulic oils and other mineral oil based fluids (Check compatibility of seal material) ▪ For use in conjunction with other liquid media please consult STAUFF Working Pressure ▪ Max. working pressure 630 bar / 9137 PSI For SMK style G and K the recommended working pressure of fitting manufacturer has to be applied. ▪ Joining under pressure up to 630 bar / 9137 PSI max. Materials Metal parts made of: ▪ Steel, black zinc/nickel-plated = C6F* (CrVI-free) Optional: ▪ Stainless Steel V2A (1.4305 / AISI 303) on request ▪ Stainless Steel V4A...
Request for a quoteResults for
Pressure couplings - Import exportNumber of results
44 ProductsCountries
Category