Power drill - Import export

DEWALT’s lead design engineer for drills was tasked with designing a high power right angle drill that is lightweight, compact, and portable. The goal with the design was to maximize performance while minimizing the size of the tool. The design would incorporate a mechanical clutch built to limit maximum torque output to 70 ft-lbs. Absent the clutch, with the huge gear reduction of 75:1, the drill would be capable of producing a lock rotor torque at the spindle of 175 ft-lbs, transmitted directly to the operator of the tool. It was determined early on that the clutching thrust required in the space available could only be achieved by a Disc Spring design. Compared to conventional coil springs, Disc Springs offer a higher load capacity in less space. Additionally, longevity and reliability is a high measure of quality for professional tools used on a daily basis. The life and performance warranty of the tool was reliant on the Disc Spring design. Visit SPIROL.

The sample drill for stalk material is a sampler especially for hay, silage, straw, herbs, bushes or other stalky plant dry material where other drills quickly get tangled. The special geometry of the drill tip cuts effectively and quickly into different stalky materials. The hay and silage sample drill takes samples quickly, cleanly and easily from a silo or bale. Sampling with mechanical assistance from a drill or powerful cordless screwdriver allows the sample to be taken effortlessly with little manual effort. The sample drill can be used flexibly both horizontally (sampling from the side) and vertically (sampling from above). The robust and durable tube drill is completely made of stainless steel 1.4404/1.4034 (316L/420) or aluminium/stainless steel 1.4034 (420). The practical ejector helps to empty the sample from the sample drill.

The FireBird® Gold Edition sets blind rivet nuts up to M8 all materials with 20.000N traction power • Drill-on of the blind rivet nut with reduced • torque and automatic switch-off • Triggering the setting process clearly • separated from the drill-on action • Automatic drill-out function after the end of the setting process • Drill-off with high torque • Sturdy, compact and shockproof tool housing Ergonomics • Fatigue-free working through well balance weight repartition and ergonomic grip • Easy stroke adjustment with Li-Ionen-Energy • High energy yield due to high voltage • Low weight allows for extremely easy and fast operation • Extremely low self discharge • New battery shape allow the tool to be stored standing on its battery • Constant setting speed • Automatic switchover from setting to drilling • Fast and simple change system for threaded mandrels More details on delivery limits will be answered in a specific enquiry (details are only exemplary)!

Thread standard: Metric, ISO DIN 13 Type: Machine bit tap Form D, for through and blind holes Application: General use Material of product: HSSG Surface treatment: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 900 N/mm2 Standard: Factory standard Tolerance: ISO2/6H Bit taps have been designed for thread cutting using battery-powered screwdriver drills and electric hand drills with right-hand and left-hand rotation. But they are also suitable for thread cutting by hand or in a stationary drilling machine. Your battery-powered screwdriver drill should have a minimum power of 7.5 Volts. Take care that the tool and the axis of the hole are exactly aligned and use a suitable cutting oil. For thread cutting we recommend using battery-powered screwdriver drills and electric hand drills with lowest rotaionsettings (0 - 450 RPM) and maximum torque settings.

Thread standard: Metric, ISO DIN 13 Type: Combined machine bit tap (core hole drilling and thread tapping) for through holes Application: Combined (core hole drilling and thread tapping) Material of product: HSSG Surface treatment: no For materials: Materials of medium mechanical strength, non ferrous metals and thermoplastics Tensile strength up to: 600 N/mm2 Standard: Factory standard Tolerance: ISO2/6H Combined Bit taps have been designed for drilling, tapping and deburring in one operation using battery-powered screwdriver drills and electric hand drills with right-hand and left-hand rotation, but they are also suitable for thread cutting in a stationary drilling machine. It is possible with this tool to produce through threads up to a maximum threaded depth of 1 x D. They are especially usefull for mounting an dsmall batch production. Take care that the tool and the axis of the hole are exactly aligned and use a suitable cutting oil.

Manufacturer of electric motors including brushless DC motors. Used in electric tools, home, automotive, medical, printing, and computer applications. Motors can be customized. voltage 12v 12v 9v 24v rated speed 3500 2800 7700 5000 RPM rated torque 6.38 4.5 9.6 7.22 mNm

N ° 1 drilling rig brand Boart longyear - nenzi, model DB 540 installed on self-propelled brand merlo, model Am 15, 2 axes 4x4x4. CE certified Self-propelled Merlo 4x4x4 (4-wheel drive, 4-wheel steering) with hydrostatic transmission. Self-propelled merlo with perkins engine, power 80 hp Drilling unit with deutz brand diesel engine, model F6L 912, power 100 hp Stroke for 3 mt: effective stroke 3600 mm Max pull 9 tons Rotation head with max torque 1100 kgm; 8 mechanical speeds max speed 550 rpm Double vice with max passage 300 mm Hydraulic winch with max pull 3000 kg @ 1st layer Triplex pump from surveys, Boart-nenzi brand, Triplex 200 model; max flow 200 lt / 1 ', pressure up to 50-60 bar Mast extension to handle 6000 mm length pipes Excellent general conditions Perfect for carrying out geognostic surveys up to 350-400 meters deep. Overhauled and repainted Viewable at our office Price upon request

N ° 1 drilling rig, Ellettari brand, Ek 200 P model with separate control unit. Year of construction: 1999 Recently revised Power unit on wheels Diesel engine with 60 hp power Drilling unit with modular Mast rubber tracks for booms 1 m or 1.5 m long maximum pull 2000 kg Rotation head with maximum torque 700 kgm. 5 speeds Floating shaft with internal passage 40 mm Air / water / mud adduction head Excellent movements Immediately available Visible at our office Price upon request

Find Air Leaks. Decrease Energy Consumption. Maximize Uptime. Compressed air is the most versatile and therefore widely used resource in industry. Using atmospheric pressure to transfer energy during industrial processes, compressed air can be found powering air tools like drills and hammers, hydraulic air cylinders for automation in manufacturing processes and much more. Compressed air is also used to power air brakes on mobile fleets and trains. Air Compressor Expenses It is so commonly found in industry it is often referred to as the fourth utility to electricity, water and gas. Of the four, compressed air consumes the most energy. Air compressor systems can differ very greatly in size, output and cost. What remains constant, is the initial investment in a compressor system is only 25% of the expenses associated with it, over its lifetime. The other 75% of the costs go to energy used to compress the air.

Brand Services represents German ZUWA-Zumpe company in Poland. German ZUWA-Zumpe company supplies the pumps on Polish market. German ZUWA-Zumpe company delivers their pumps to OEM producers. The scope of pumps: Impeller pumps Drill powered pumps Pumps and refuelling systems for diesel Oil pumps AdBlue pumps Gasoline pumps Barell and nad pumps Waste water pumps Side channel pumps Diaphragm pumps PTO pumps Hand pumps

The short flute developed at our request by the company DIAGER makes it possible to meet the constraints of asbestos sites and avoids gel drips on the operator during drilling in the roof. It is also a visual cue to avoid drilling too deep. SPECIFICATIONS • Solid carbide insert with selfcentering point • Pad angle 135° • 3 simultaneous contact points • The new propeller offers a double cut halfround and square • SDSplus compatible attachment

The short flute developed at our request by the company DIAGER makes it possible to meet the constraints of asbestos sites and avoids gel drips on the operator during drilling in the roof. It is also a visual cue to avoid drilling too deep. SPECIFICATIONS • Solid carbide insert with selfcentering point • Pad angle 135° • 3 simultaneous contact points • The new propeller offers a double cut halfround and square • SDSplus compatible attachment BENEFITS • The 3piece monobloc cutting insert is an allconcrete solution • Selfcentering point provides precision when starting the hole

The short flute developed at our request by the company DIAGER makes it possible to meet the constraints of asbestos sites and avoids gel drips on the operator during drilling in the roof. It is also a visual cue to avoid drilling too deep. SPECIFICATIONS • Solid carbide insert with selfcentering point • Pad angle 135° • 3 simultaneous contact points • The new propeller offers a double cut halfround and square • SDSplus compatible attachment BENEFITS • The 3piece monobloc cutting insert is an allconcrete solution

The MOTOSHTORM bit is designed for easy ice drilling with a motor engine in any weather conditions. Due to the exact attack angle of blades, drilling is extremely fast. Reliable polymer coating withstands temperature fluctuations and heavy mechanical loads. Polymer powder coating is applied using European hightech equipment. The bit can be attached to a screwdriver or a motor engine. To connect the bit to the motordrill shaft, you must use a screw, a washer, and a nut, which are installed using the keys included in the kit. When attaching the bit to a screwdriver, an adapter (sold separately) and a wing screw (included) are required. If the ice is more than one meter thick, then an extension (sold separately) must be installed on the bit, which will increase the drilling depth by 2540 cm.

Iceberg is a seamless bit with classical clockwise rotation, which can be attached to a screwdriver, a motor engine, or a handle and is designed for easy ice drilling. The upper part of the bit has a “warm” antislip casing for its comfortable transportation. The removable head is made of durable composite material that withstands great loads and guarantees a constant cutting angle of the blades. Highquality steel semicircular blades are suitable for all types of ice and provide easy drilling. It is recommended to apply ICEBERG 130R blades for Wet Ice to avoid slippage while drilling when using ICEBERG bits with a screwdriver, a motor, or an engine. To connect the drill to a powerengine shaft, a wing screw is used (included in the kit). The engine can be attached either directly to the bit or through an extension. An adapter is required to attach the bit to the screwdriver. To increase the drilling depth, it is possible to add a telescopic extension.