Positive model - Import export

MECHANICAL/HYDRAULIC FM LIFTERS FOR FURNITURE Ideal for transporting furniture, safes, containers and machine tools. The FM series mechanical/hydraulic lifter kit for furniture is suitable for moving furniture components in furniture stores, during removals or simply when you need to move furniture safely and without any effort. The maximum load capacity of the pair is 600kg (FM60 mechanical model) and 1800kg (FM180/A - FM 180/B hydraulic models). The kit consists of 2 lifts with lifting plates with non-slip coating and a strap for fixing. Lifting is by means of a screw with crank for the FM 60 model and a practical lever with a hydraulic pump for FM 180. The lifts are equipped with non-marking pivoting rubber wheels with steering lever. RAL 1028 yellow paint for the FM 180 models and blue for the FM 60 model Operation: Position the lifting plates below the part to be lifted, adjust the upper support and tension the safety belt.

This exceptionally versatile tool for post-mould assemblies is ideally suited to all levels of production: from a single unit for prototype assembly, to multiple units on an assembly line. The SPIROL® Model CM Manual Compression Limiter Installation Machine easily accommodates quick change-overs by simply: • Replacing the fixture • Swapping insertion punch/pusher tip • Adjusting the positive stop for new install height. The use of high quality shafting and bearings results in smooth operation, precise positioning, repeatability, and durability. The Model CM Manual Compression Limiter Installation Machine installs Compression Limiters ranging in diameter from M3 to M10 metric and #4 to 3/8" unified, and has a maximum insertion force of 0.9kN (200 lbs).

The Model PMH easily accommodates quick change-overs. The fixture is simply replaced at the base of the machine, and the pin diameter is easily changed by switching the pin driving chuck. The precisely machined rack and casting results in smooth operation, precise positioning, repeatability, and durability. The Model PMH Heavy Duty Manual Pin Inserter installs pins ranging in diameter from 0.8mm-10mm (.031”-.375”) with a maximum insertion force of 6.7 kN (1,500 lbs).

This exceptionally versatile tool is ideally suited to all levels of production: from a single unit for prototype assembly, to multiple units on an assembly line. The Model PM Manual Pin Inserter easily accommodates quick change-overs. The part holding device (fixture) is simply replaced from the base of the machine. The pin diameter is easily changed, positive pin depth easily adjusted, and part size variation easily accommodated. The use of high-tech shafting and bearings results in smooth operation, precise positioning, repeatability, and durability. The Model PM Manual Pin Inserter installs pins ranging in diameter from 0.8mm-4mm (.031”-.156”) with a maximum insertion force of 0.9 kN (200 lbs).

An accurate and consistent method to install virtually any Compression Limiter into plastic applications requiring up to 4.5kN (1000 lbs). Install just one Compression Limiter into one assembly, or several Limiters across multiple assemblies simultaneously for increased productivity. The Model CP’s quick-change tooling creates the flexibility to adapt the platform to a variety of products within seconds. The Model CP has a 230mm x 280mm (9”x11”) work area and is built on a rigid steel frame with high-precision shafting and linear bearings resulting in smooth operation, precise positioning, repeatability, and durability. The Model CP is available with optional enhancement features for error-proofing and maximum efficiency.

High precision Torque Gauge Suitable for fine torque measurements required in inspection, research and assembly of small parts, such as precision instruments, electronic products. There are various application types, e.g. for measuring rotating objects, also for measuring torque on orthodontic springs et al. Graduation and side memory pointer (except ATG045CN) are on the body. This ensures excellent visibility in different operating positions. ATG models have a three-jaw chuck which firmly grasp the object. Main body and chuck are locked when pushing “push lock button”. Push lock button makes body and chuck secured while using chuck. Key Features - Accuracy ± 2% - Bi-directional measurement – cw / ccw - Dial scaled 270 degrees each direction, built-in overload protection - Side scale ensures excellent visibility - Models with -S suffix have additional memory pointer in top display - Aluminium cover and steel cuck (#321) as standard.

PALLET TRUCK FOR FRUITS AND VEGETABLES PROFESSIONAL SERIES FP PRO-ORTO The pallet trucks for fruit and vegetables Ferplast FP PRO-ORTO series are specially designed for those who work in the fruit and vegetable sector and need to move containers and pallets or crates with greater width. They are also characterized by: - Structure in deep-drawn sheet steel with rounded fork tips. (galvanized steel sheet structure for the FPGS HY 25/122 ORTO model) - Hydraulic unit built in cast iron (resistant and reliable), mounted on a high precision thrust bearing. (steel hydraulic unit for the FPGS HY 25/122 ORTO model) - 3-position control lever with adjustable descent speed. - Lifting with rudder drive and automatic recall in vertical position. - Safety valves for lifting and overload limit switches. - Directional wheels diameter 200 mm, in Nylon with polyurethane band (fully nylon wheels for the FPGS HY 25/122 ORTO model).

The oven becomes a complete cooking station! Wood-fired front access model. Can be positioned on both sides of the oven.

WOMEN’S STOCK CLOTHING BY KNOWN DANISH BRAND A CATEGORY VARIOUS POSITIONS AND MODELS

• According to DIN EN 61810-1, IEC/EN 60669-1 • Switching reliability according to IEC/EN 60669-2-2 • Safe separation according to IEC/EN 61140, IEC/EN 60335 • OB 5693: horizontal model OB 5694: vertical model • Bistable, mechanical latching of contact • For impulse operation, at failure operation 100 % ED possible • Same pulse (energy and direction) for both switching positions • AC and DC - model • Patent on function principle • On request wash proof

• According to DIN EN 61810-1, IEC/EN 60669-1 • Switching reliability according to IEC/EN 60669-2-2 • Safe separation according to IEC/EN 61140, IEC/EN 60335 • OB 5693: horizontal model OB 5694: vertical model • Bistable, mechanical latching of contact • For impulse operation, at failure operation 100 % ED possible • Same pulse (energy and direction) for both switching positions • AC and DC - model • Patent on function principle • On request wash proof

• According to DIN EN 61810-1, IEC/EN 60669-1 • Switching reliability according to IEC/EN 60669-2-2 • Safe separation according to IEC/EN 61140, IEC/EN 60335 • OB 5693: horizontal model OB 5694: vertical model • Bistable, mechanical latching of contact • For impulse operation, at failure operation 100 % ED possible • Same pulse (energy and direction) for both switching positions • AC and DC - model • Patent on function principle • On request wash proof

• According to DIN EN 61810-1, IEC/EN 60669-1 • Switching reliability according to IEC/EN 60669-2-2 • Safe separation according to IEC/EN 61140, IEC/EN 60335 • OB 5693: horizontal model OB 5694: vertical model • Bistable, mechanical latching of contact • For impulse operation, at failure operation 100 % ED possible • Same pulse (energy and direction) for both switching positions • AC and DC - model • Patent on function principle • On request wash proof

Omnitrack Flexible Conveyors – Versatile & mobile conveyor modules. Compact conveyors extend up to 3.6 times their retracted length & sturdy castors are then locked once positioned. All models are height adjustable & assembled with either Skatewheels for flat based items & tighter turns, or Conveyor Rollers for Increased support of irregular/deformable items. Rollers & wheels are produced from low-inertia, high-impact PVC. - 80 kg/metre load rating. - Adjustable working height (650 – 1100mm). - Maximum axle pitch 125mm (extended). - 400 mm or 600 mm standard conveyor width. - Other models & materials available.

Universal Operating Table with electro-hydraulic adjustment by means of hand-held control for three to four different positionings (depending on the model version): - High/Low, - Lateral - Trendelenburg/Reverse Trendelenburg - Back section adjustment Model versions with kidney bridge and 250 mm longitudinal shift for unrestricted X-raying. Hand-held control with backlit keys for for a safe operation in the darkened OR theatre and an optional “Return-to-zero“ function. An emergency control at the table column (optional) and manual hydraulic activation of table functions via preselector and pump lever ensures uninterrupted surgical proceedings. Rechargeable batteries with external battery charger. Mobile on four double castors, auxiliary directional castor and central brake activated by foot pedal. SAF mattresses preventing pressure ulcers fixed by disinfection-proof adhesive gel strips providing optimal retention and hygiene.

The ENCODER machine series was specifically developed for integration in all kinds of automated systems. Variable control possibilities: For the EP series we offer three different electronic control possibilities. Variable installation positions: The ENCODER EP/1 models, equipped with a piston on the ink/ doctoring cup and adequate overhead control, guarantee all print positions. Fitted with the ENCODER aluminium stand, the ENCODER EP/1 have a free choice of positioning within 360° and the distance to the printing component can be additionally adjusted with a handwheel.