Results for
MAGAGER, UNIPESSOAL, LDA
Portugal
PRO-ENTRY BENCH LATHE 10507771 This LATHE features a sturdy, rigid design and is manufactured from a combination of high quality gray grained iron and hardened steel. The IRWIN Bench Vice also features a cast steel handle that folds away before the vise can be overloaded and a two-start rolled acme screw that can fully open the jaws in minimal winding. It is an ideal tool for any professional or DIY enthusiast who requires a compact, multi-functional vise with superior clamping force, safe use and robust construction. Features and benefits: Body and sliding jaw are cast from close-grit gray iron, which is machined onto all friction surfaces for smooth, reliable action. Main screw made of high quality hardened steel Anvil included on the back of the body Safety stop system prevents the blade from being separated from the body Hardened steel jaws extend jaw life and are replaceable SG shatterproof iron nut can be replaced when damaged
Request for a quoteMAGAGER, UNIPESSOAL, LDA
Portugal
Protection of welded joints. Allows welded parts to be lacquered. GALVASPRAY sprays a protective zinc finish. High resistance to oxidation and corrosion (more than 80 hours in salt fog) Quick drying (about 5 minutes) and no drips. Volume: 400 ml (liquid) - 520 ml (nominal). Propellant gas: propane/butane. Base: zinc powder in vegetable resin. Instructions for use: Clean and degrease the area to be treated. Shake the can before using for at least 1 minute. Spray 25 cm away from the piece in short, even passes.
Request for a quoteMAGAGER, UNIPESSOAL, LDA
Portugal
Workshop Bench Lathe 125 mm IRWIN RECORD No. 5 The collets, chuck and main vise are made of steel. The lathe has a double drive mechanism and an Acme thread to speed up the opening and closing of the collets with minimal rewinding. The workshop bench vice is the most used in the IRWIN® Record® range. SLIDING CALIPPER AND STRUCTURE OF FINE GRAIN GRAY CASTING: Suitable for all types of friction surfaces ensuring a smooth grip. SAFETY TOP: Prevents the guide from coming loose from the structure. HARDENED STEEL COLLECTORS: Extends the life of the collets and can be replaced. UNBREAKABLE SG IRON NUT: It can be replaced in case of wear. CAST STEEL CHUCK: Bends if the tool is subjected to excessive pressure. ACME THREAD WITH DOUBLE DRIVE MECHANISM: For faster operation.
Request for a quoteMAGAGER, UNIPESSOAL, LDA
Portugal
Workshop Bench Lathe 115 mm IRWIN RECORD No. 4 The collets, chuck and main vise are made of steel. The lathe has a double drive mechanism and an Acme thread to speed up the opening and closing of the collets with minimal rewinding. The workshop bench vice is the most used in the IRWIN® Record® range. SLIDING CALIPPER AND STRUCTURE OF FINE GRAIN GRAY CASTING: Suitable for all types of friction surfaces ensuring a smooth grip. SAFETY TOP: Prevents the guide from coming loose from the structure. HARDENED STEEL COLLECTORS: Extends the life of the collets and can be replaced. UNBREAKABLE SG IRON NUT: It can be replaced in case of wear. CAST STEEL CHUCK: Bends if the tool is subjected to excessive pressure. ACME THREAD WITH DOUBLE DRIVE MECHANISM: For faster operation.
Request for a quoteMAGAGER, UNIPESSOAL, LDA
Portugal
Fully mechanized on all load bearing surfaces Replaceable hardened steel chucks Unbreakable iron nut can be replaced when used
Request for a quoteMAGAGER, UNIPESSOAL, LDA
Portugal
Silicone-free water-based anti-splash Spraymig H2O, based on highly efficient water-soluble substances. It prevents splashes from sticking to robot nozzles, tips and workpieces and considerably extends the life of the nozzles. Allows quick changing and cleaning of nozzles. It is possible to paint, galvanize, varnish parts. A preliminary test is recommended. Very low consumption for high effectiveness. Water-based and odorless. No influence on porosity and cold cracking. No influence of the diffusible hydrogen content in the weld metal. Soluble and silicone-free. Biodegradable. Allows you to lacquer parts. Physical and chemical properties: Appearance: clear colorless liquid. Density at 20 °C: 1.00. Pure pH: 7. Propellant gas: dimethyl ether. Base: water-based emulsion of organic substances
Request for a quoteMAGAGER, UNIPESSOAL, LDA
Portugal
Silicone-free water-based anti-splash Spraymig H2O, based on highly efficient water-soluble substances. It prevents splashes from sticking to robot nozzles, tips and workpieces and considerably extends the life of the nozzles. Allows quick changing and cleaning of nozzles. It is possible to paint, galvanize, varnish parts. A preliminary test is recommended. Very low consumption for high effectiveness. Water-based and odorless. No influence on porosity and cold cracking. No influence of the diffusible hydrogen content in the weld metal. Soluble and silicone-free. Biodegradable. Allows you to lacquer parts. Physical and chemical properties: Appearance: clear colorless liquid. Density at 20 °C: 1.00. Pure pH: 7. Volume: Spray: 400 ml (liquid), 520 ml (nominal) Propellant gas: dimethyl ether. Base: aqueous emulsion of organic substances.
Request for a quoteMAGAGER, UNIPESSOAL, LDA
Portugal
aluminum welding wire MIG/MAG (GMAW) Welding | ED701763 General purpose filler alloy for 5XXX and 6XXX series alloys The most widely used soldering alloy High strength filler metal
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
MAGAGER, UNIPESSOAL, LDA
Portugal
Copper clad solid wire used in general purpose, single or multipass soldering for use with CO2 shielding gas or Air/CO2 mixture. MIG/MAG welding (GMAW)
Request for a quoteMAGAGER, UNIPESSOAL, LDA
Portugal
For welding with self-shielded cored wire (FCAW-S)
Request for a quoteMAGAGER, UNIPESSOAL, LDA
Portugal
Smooth and stable arc. Well suited for positional welding (particularly vertical and overhead). Good slag removal even in narrow spaces. Stick (SMAW)
Request for a quoteEUROPONTEX IMPORTAÇÂO & EXPORTAÇÂO
Portugal
Stick Electrode, fluxes, solid wires, SAW wires, flux-Cored wires, welding Processes and Machines.
Request for a quoteResults for
Consumables - Import exportNumber of results
24 ProductsCompany type