Miscellaneous industrial equipment - Import export

DESIGN - MANUFACTURE - INSTALLATION - COMMISSIONING COMPLETE INSTALLATIONS MINING - QUARRYING - RECYCLING

DESIGN - MANUFACTURE - INSTALLATION - COMMISSIONING COMPLETE INSTALLATIONS MINING - QUARRYING - RECYCLING

Exchangers in stainless steel or carbon steel, made using the cold precision bending method.

This equipment allows the recovery of thermal energy dissipated by the chimney. Economizers provide greater thermal efficiency of the boiler, greater operating stability due to the modulating water supply system. Rapid recovery of investment.

Over 200 Boilers Installed! Ideal steam generator for small and medium-sized clothing factories, dry cleaning and ironing shops, sports facilities, etc. As determined by Decree-Law 97/2000 of May 25, this generator does not require a stove for its operation, nor an installation license . In article 3, paragraph 2 of Decree-Law 78/2004 of April 3, this generator does not require gas measurements (P≤100KW) . These are vertical development boilers without coils , which use automatic pressurised burners, and can use gaseous or liquid fuels. The design of this steam generator allows an increase in combustion and heat transfer efficiency, as well as a reduction in the unburned rate; The furnace and body are concentric and separated by the water towel to be vaporised. The following characteristics are noteworthy: Small installation dimensions High efficiency Double layer thermal insulation of ceramic blanket and rock wool providing high efficiency.

The use of gas economizers and primary and secondary air preheating allows for yields of over 90%.

In order to reduce particle emissions into the atmosphere, several projects require the adoption of dust removal systems. Cyclone systems are those that have the lowest total acquisition cost - including investment and operating costs - due to their simplicity and robustness. We have a partnership with Advanced Cyclone Systems, which specializes in developing the most advanced cyclones in the world, for each project tailored to each boiler. Advanced Cyclone Systems guarantees compliance with current legislation exclusively with cyclone systems, called Hurricane or ReCyclone .

The OVERFIRE System ensures the reduction of CO, NOx and unburned particles emissions. Incandescent particles in their ascending path receive 21% oxygen and incinerate, while larger particles are precipitated towards the combustion zone by the effect of the air curtain. This system is optimized for each boiler using three-dimensional development software.

Advanced combustion control platform and all boiler components, ensuring combustion efficiencies of over 90%. By using frequency inverters, we ensure very low electrical consumption/steam produced ratios. The use of a 15” touch panel allows easy viewing and operation of the entire boiler. By providing an internet connection, the system is prepared for remote assistance.

The introduction of control systems with automatic control, O2/CO and vacuum probes where the precision of the air/fuel ratio allows combustion efficiency levels >90% and emission levels within environmental limits. The introduction of optimized cyclones “Advanced Cyclone Systems”, the most advanced in the world, guarantees reduced particle emissions. The OVERFIRE System guarantees the reduction of CO, NOx and unburned emissions. The incandescent particles in their upward trajectory receive 21% oxygen and incinerate, while the larger ones, due to the effect of the air curtain, precipitate towards the combustion zone.

Converting boilers to burn biomass is the most economical solution, taking into account the use of the existing pressure vessel. Transforming a 4ton/h boiler to Biomass.

Steam, Hot and Superheated Water Generators High-performance, automatic, triple-pass gas-tube generators with an inversion chamber completely surrounded by water. The generators are designed according to the German boiler construction code TRD, using Siemens-Martin mild steel plates and tubes in their construction. Standard versions for steam productions between 600 and 12,000 kg/h, suitable for burning liquid or gaseous industrial fuels. Versions on request for other productions and solid fuels.

Housings for Equipments Sport Housing for Medical applications

The NORMFINISH NP12 blasting booth is an abrasive projection system with water (wet sandblasting system), suitable for the "soft" finish of parts. Equipped with a special pump that allows a continuous supply of water and abrasive to the stripping nozzle. At the outlet of the nozzle, to the water / abrasive mixture, compressed air is added to increase the speed and additional power of the working mixture. The mixture is collected in a funnel, with pump stirring to keep the abrasive in suspension. Dust-free process Degreasing and sandblasting in one process Low impact on surfaces Smoother surfaces, with less adhesion to contaminants. Dimensions of the blasting chamber (width x depth x height): NP12: 1110 x 885 x 870 mm

The NORMFINISH stripping cabinet, under pressure, is equipped with a very efficient cyclone to guarantee the cleaning of the abrasive in order to prolong its life. This results in less wear on the equipment and better visibility of the operation. The pressure pot is equipped with a metering device which ensures a constant and optimized air / abrasive flow rate, which results in an efficient and fast sanding operation. Efficient abrasive cleaning thanks to the inclusion of cyclone Suitable for all types of abrasives Easy abrasive change Ergonomic construction. With a robust construction and an ergonomic design for easy use, thisblasting cabinet allows a quick change of any type of abrasive, for different treatments (cleaning, stripping, shot blasting, etc.). Several optional accessories are available. The best solution for high productivity operations. Dimensions of the blasting chamber (width x depth x height): DP12: 1100 x 930 x 830 mm DP14: 1370 x 1020 x 890 mm

The NORMFINISH stripping cabinet, in suction, is equipped with a very efficient cyclone to guarantee the cleaning of the abrasive in order to prolong its life. This results in less wear on the equipment and better visibility of the operation. The suction guns with injector, as well as the mixing chamber, ensure a constant and optimized air / abrasive flow, which results in an efficient and fast blasting operation. Efficient abrasive cleaning thanks to the inclusion of cyclone Suitable for all types of abrasives Easy abrasive change Ergonomic construction. Dimensions of the blasting chamber (width x depth x height): DI12: 1100 x 800 x 740 mm DI14: 1370 x 890 x 810 mm

The MISTRAL MI04 stripping cabinet, in suction, is equipped with a very efficient cyclone to guarantee the cleaning of the abrasive in order to prolong its life. This results in less wear on the equipment and better visibility of the operation. MISTRAL MI04 is a cabinet of solid construction, developed with LEERING technology and a long experience to obtain a cabin with an excellent value / performance ratio. Fast and efficient sandblasting Trouble-free operation Good visibility thanks to proper circulation and air filtration Solid construction and good sealing. Dimensions of the blasting chamber (width x depth x height): MI04: 1105 x 795 x 874 mm

Components and parts for machine builders,

The equipment that guarantees total hygiene and safety control The Pass-120 Boot Sanitizing Station is a disinfection equipment that guarantees strict hygiene control of the operator's boots. With automatic soap dosing system and two rotating brushes 700 mm long and 170 mm in diameter. This equipment is very easy to implement, has an ergonomic design and an input and output system controlled by photocells. The most competitive price-quality ratio on the market Automatic soap dosing Entry and exit step controlled by photocells 700 mm long rotating brushes Footwear sanitized in milliseconds Stainless steel construction Cabinet with lock for the disinfectant bottle