Polyurethane painting - Import export

TECHNICAL DEFINITION • White fine grain repair filler for interior and exterior use • Does not shrink • High resin content • FINEX SYSTEM is a multi-purpose filler, which allows to fill holes and cracks, and to repair windowsills and damaged angles ACCEPTED SUBSTRATES Cement, concrete, bricks, concrete blocks, stone, aerated concrete, plaster, old paint, old tiling. SUITABLE SURFACES Once completely dry, FINEX SYSTEM can be covered with all types of paint, watertightness system, plaster- or cement-based fillers, and silicate, epoxy or polyurethane paint. TECHNICAL CHARACTERISTICS • Grain size : fine • Adhesion : complies with standard DTU 42.1 • pH : 9 once dry • Setting starts after 50 minutes • Setting ends in 1 hr 10 min PREPARATION OF SURFACES BEFORE APPLICATION The substrate must be clean, dry, free of dust and of any trace of stripping oil. Walls that are peeling off must be scraped beforehand. Strip any old paint in poor condition and remove any old thick plastic covering.

Standard: AISI, ASTM, BS, DIN, GB, JIS, AS ETC   Thickness:  0.12-3.5mm   Width:1250/1220/1200/1000/914/762(before corrugation)930/915/910/905/900/880/875/815/810/790/780/680/670/660/655/650(after corrugation) or as required.   Ditch and Peak after corrugation: 12 Ditches/11 Peak; 11 Ditches/10 Peak; 9 Ditches/ 8 Peak   Length: In coil or as required   Zinc Coating: Z40-275g/sqm    Paint Top: 15 - 35 Microns    Paint Back: 5 - 35 Microns    Coating Color: ALL RAL Cards Color    Coating Type: Top Painted : PVDF / HDP / SMP / PE / PU                            Primer Painted : Polyurethane / Epoxy / PE                            Back Painted : Epoxy / Modified Polyester   Coil Weight: 3-8 Tons   Coil ID: 508/610mm Color: RAL Code Or According To Customer's Sample   Spangle: No spangle, With spangle   MOQ: 5 Tons   Package: Standard Sea Worthy Package   Port: China

Riga Ignisafe Birch plywood impregnated with fire retardant. Types Riga Ply (raw plywood), BB/BB, BB/WG or WG/WG Riga Form overlaid on one face with a dark brown phenol film (F I/BB, F I/WG) Fire classes / standards It is possible to impregnate in conformity with: C s1 d0 (C class) according to EN 13501 (application – walls and ceiling) B s1 d0 (B class) according to EN 13501 (normally required in higher risk areas such as escape routes and staircases) M1 class according to French Standard NF F 16101 (requirements for materials with application in railway industry) Application Anywhere where high fire safety is required – mostly in transport and building industry. Riga Ignisafe is normally for interior applications (epoxy, polyurethane and alkyd paints are recommended) In outdoor use the surface must be protected by paint (water-soluble latex paint) Finishing material can significantly affect conformity to the fire class. Painting should be done according to the paint manufacturer's instructions. Riga Ignisafe must not be heated above 100 0C. Advantages Riga Ignisafe significantly slows down fire spread, reduces heat and smoke generation, ensures extra evacuation time, thus saves lives and restricts damage costs Riga Ignisafe can be painted and glued Overlaying Riga Ignisafe is without overlay or is overlaid on one face with a dark brown phenol film. Impregnation Plywood is impregnated with a fire retardant. Impregnation can affect strength parameters; however they will exceed standard minimum requirements. Sizes 1220 mm x 2440 mm 1250 mm x 2500 mm 1220 mm x 3000 mm 1250 mm x 3000 mm Cut to size panels and machining available in accordance with the customers’ requirements. Thickness 9, 12, 15, 18, 21, 24 mm. Other thicknesses available upon requests.