Results for
DC DI CANDIA RUOTE
Italy
The POLY-D wheels are manufactured through a new vacuum - dryer - high pressure process, entirely developed by DC, which results in the higher quality wheel in its range of products. Lifetime of these wheels has been improved thanks to the complete absence of air bubbles inside the finished product, obtained through our new production process. The POLY-D wheels can be fitted into a specific series of brackets for which are specifically studied and produced to fulfill the extremely wide variability of conditions to which they are submitted, for both industrial and food industry. Brackets are fully certified and manufactured with food and sanitary grade Stainless Steel in AISI 304, and are available in both metric and inches standard sizes, and are also available in double-layer galvanized pressed steel. The POLY-D wheels can be used on trolleys for food industry, tannery industry, equipment and trolleys for meat and fish industry, slaughterhouses, ice cream machinery and flower trolleys
Request for a quoteROLLON GMBH
Germany
“Lift and move” motion profile with multiple stations and long travel lengths. Synchronized movement system with hard anodized profiles. Polyamide nylon wheels with a rack and pinion system manage horizontal and vertical movement. Column modules carry out lifting movement via a recirculating ball screw drive. The column modules are operated with a single geared motor through a transmission with shafts and corner stops. LOAD CAPACITY ACCORDING TO DYNAMICS Reported data must be verified according to the application. Please get in touch with our technical department for more information.
Request for a quoteMEVATEC S.R.O.
Czech Rep.
Version with 4 polyamide wheels.
Request for a quoteMEVATEC S.R.O.
Czech Rep.
Using this transport truck you will transport your plastic crates in Euro format anywhere with ease. Size is intended for basic dimension 60 x 40 cm also suitable for 2 crates with dimension 40 x 30 cm. Compatible with EURO and also coneshaped crates. Sturdy butight structure. Easily maneuverable thanks to its four swivel steerable wheels from polyamide.
Request for a quoteDC DI CANDIA RUOTE
Italy
The D-NAMIC wheels are manufactured through a new vacuum - dryer - high pressure process, entirely developed by DC, which results in the higher quality wheel in its range of products, and the only one to be covered by a lifetime warranty against the de-bonding of the Polyurethane tyre from the wheel centre. The Polyurethane tyre grant a high cut and tear propagation resistance, is mechanically bonded to the wheel core, and the coupling is further strengthened by a surface adhesion which is obtained without the use of any glue or chemical bonding. The D-NAMIC wheels can be fitted into a specific series of brackets for which are specifically studied and produced to fulfill the extremely wide variability of conditions to which they are submitted, for both industrial and food industry. D-NAMIC are recommended on trolleys for food industry and chemical industry, industrial trolleys, equipment and trolleys for meat and fish industry, slaughterhouses and textile industry.
Request for a quoteDC DI CANDIA RUOTE
Italy
The D-FLEX wheels are manufactured through a new vacuum - dryer - high pressure process, entirely developed by DC, which results in the higher quality wheel in its range of products, and the only one to be covered by a lifetime warranty** against the de-bonding of the elastic Polyurethane tyre from the wheel centre, plus they grant a high cut and tear propagation resistance. Combines the load capacity and the resistance to wear and tear of the polyurethane with the ability to overcome obstacles and to reduce noise, vibrations and impacts of the elastic rubber. The Polyurethane tyre is mechanically bonded to the wheel core, and the coupling is further strengthened by a surface adhesion which is obtained without the use of any glue or chemical bonding. Recommended on trolleys for food industry and chemical industry, industrial trolleys, equipment and trolleys for meat and fish industry, slaughterhouses, pharmaceutical industry, floor-washing machines and scrubbers, and for traction.
Request for a quoteTORWEGGE GMBH & CO. KG
Germany
Heavy-duty castors with polyurethane wheel - polyamide 6 wheel body with ball bearing - polyamide 6 can absorbs and release moisture - heavy welded steel construction The strongest Torwegge housing series consist of a welded steel construction for maximum dynamic stresses. The swivel castor housings are equipped with sealed axial rib ball bearing an tapered roller bearing and thus particularly sensitive against surges and beats. The housing head is screwed and secured by a heavy center bolt. The material polyamide (PA 6) is a high-quality plastic with a high load-carrying capacity. Polyamide is hygienic and odorless. It is also resistant to salt water, as well as many acids and alkalis up to a certain concentration. This material is often used in the food and pharmaceutical industries.
Request for a quoteTORWEGGE GMBH & CO. KG
Germany
Standard castor with polyurethane wheel - polyamide 6 wheel body with ball bearing - polyurethane tread, approx. 95° shore A - standard steel sheet housing, galvanized Torwegge‘s standard housings are made from deep-drawn, galvanized steel sheet. The solid-riveted, double ball bearing in the slewing ring delivers an advantageous price-performance ratio when used for hand-held logistics applications. Castors in standard housing are commonly used by a variety of sectors in transport racks. They can carry a max. load of 1,200 kg at 4 km/h. The material polyurethane (PU) has a high load capacity with low abrasion. It also features high chemical resistance. These properties make polyurethane suitable for almost any application.
Request for a quoteTORWEGGE GMBH & CO. KG
Germany
Smooth running polyurethane castor with polyurethane wheel - polyamide 6 wheel body with ball bearing - polyurethane tread, approx. 95° shore A - with thread guards to protect the ball bearing from dust and dirt - standard steel sheet housing, galvanized Torwegge‘s standard housings are made from deep-drawn, galvanized steel sheet. The solid-riveted, double ball bearing in the slewing ring delivers an advantageous price-performance ratio when used for hand-held logistics applications. Castors in standard housing are commonly used by a variety of sectors in transport racks. They can carry a max. load of 1,200 kg at 4 km/h. The material polyurethane (PU) has a high load capacity with low abrasion. It also features high chemical resistance. These properties make polyurethane suitable for almost any application.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Results for
Polyamide wheel - Import exportNumber of results
18 ProductsCountries
Company type