Results for
GRIST 99 PRINTING HOUSE
Poland
The multitude of printing finishing and refinement techniques currently available on the market can give people unfamiliar with this topic a headache. We help our clients in their selection so as to maximize the desired effect, while not burdening their budget too much. We encourage you to familiarize yourself with the methods of refinement that we offer in our printing house. If you have any additional questions, we remain at your disposal.
Request for a quoteAKOMEX GROUP
Poland
Packaging with a new generation ANTYVIR varnish helps to protect against growth of microorganisms and transmission of infections after direct contact with packaging. A bioactive layer of the varnish effectively and continuously reduces growth of bacteria and viruses.
Request for a quoteTORRO SP. Z O.O.
Poland
It is possible to mix "glitter" type solids with varnish and apply them in-line on printed materials. The best visual results are obtained by applying these two varnishes in one pass during the printing of the actual run. The advantage of drip-off over selective lacquering, e.g. screen printing, is that a perfect fit is achieved even on very small elements and that raster varnishing is possible. Thanks to the varnishing techniques used by our company we obtain very visually attractive products such as folders, leaflets or packaging. Proposed effects: drip-off glossy, drip-off matt with large or small grain. This technique is especially recommended for materials printed on all kinds of chalk papers and cartons refined with metallic foils.
Request for a quoteALLIED FOR TECH
Poland
We offer the highest quality varnishes from the best producers, with a choice of the full range of colors and shades according to the RAL and NCS palettes.
Request for a quoteAKOMEX GROUP
Poland
Packaging with a new generation ANTYVIR varnish helps to protect against growth of microorganisms and transmission of infections after direct contact with packaging. A bioactive layer of the varnish effectively and continuously reduces growth of bacteria and viruses. PROPERTIES: ˈ ANTYVIR VARNISH kills up to 99.96% of staphylococcus aureus bacteria and up to 99.97% of E. coli bacteria ˈ The varnish is intended for printing easily absorbable surfaces which are in indirect contact with food ˈ Confirmed effectiveness in an independent microbiological test, consistent with ISO 20743:2013 ˈ Antibacterial properties are activated by light and air ˈ Durability of up to 1 year
Request for a quoteAKOMEX GROUP
Poland
Varnishing (dispersion, UV, oil, hybrid and others) Iriodin application Laminating with gold and silver foil Braille application Hot foil stamping Foil window patching Single-level and 3D clinching of graphical elements
Request for a quoteTORRO SP. Z O.O.
Poland
The predominant part of our production is packaging with cardboard boxes metallized with silver, gold and rainbow film. Our many years of experience in the implementation of the most complex and variously refined works performed for customers from Poland and abroad, give you a guarantee of perfectly made packaging. We print PACKAGING with a wide range of enhancements: hybrid UV varnish, pearl varnish, heavy varnish, varnishes with particles such as mica or iron, 3D effect varnish (embossing) and convex varnish, giving us the possibility of creating sensory packaging.
Request for a quoteFORTIS M. BOROWY SP. J.
Poland
Super thin and comfortable non-slip mouse pads are printed in full colour directly onto 0.3mm PVC foil using UV printing technology. To protect the print we cover the bottom with a layer of white paint and then apply special non-slip varnish in a dotted pattern. Thanks to this combination, the mouse pads are durable, easy to clean and look stylish. We produce mouse pads in any size and shape, depending on the customer's wishes. Standard: 220 x 180 mm or Ø210 mm.
Request for a quoteJERZY PRZYBYLSKI CARPENTRY LTD
Poland
When looking at the Silvia bed, what comes to the fore are the 20 cm by 4 cm rounded legs at the top. The frame is four solid beams 20 cm high and 4 cm thick. Wood types: alder, beech, cherry, oak, ash, maple, alder, walnut / 21 colours
Request for a quoteGLADIUS - CUSTOM HOTEL FURNITURE
Poland
Hotel furniture "WAVE" combines contemporary design and the "spirit" of 70's furniture and 3D-CNC milling technology. We have combined light beech wood bases with a high-quality furniture board and a varnished and 3D milled MDF. The "WAVE" hotel furniture line is perfect for facilities of a higher standard. The MDF used for their production gives unlimited possibilities in terms of color, staining and milling pattern. In this case, the designed wave pattern perfectly reflects the character of the "FALEZA" hotel, picturesquely situated on the top of a cliff in Jastrzębia Góra on the coast of the Baltic Sea. Perfectly matched colors of materials and accessories complement the whole, creating a refined and cozy interior matching the style of the object's profile.
Request for a quoteZAKŁAD STOŁARSKI ŁUKASZ CIECZKO
Poland
The cots have three removable rungs, three levels of bottom adjustment With the possibility of mounting a drawer and a drawer cover. Possibility of installing a railing - enabling the cot to be converted into a couch. Size of the package: Without drawer 1240x700x130mm, weight 11kg With drawer 1240x700x140mm, weight 20kg
Request for a quoteZAKŁAD STOŁARSKI ŁUKASZ CIECZKO
Poland
The cradle has 9 levels of adjustment of the bottom, can be converted into an attachment for the parents' bed. Packaging dimensions: 940x590x110mm, weight 11kg
Request for a quoteZAKŁAD STOŁARSKI ŁUKASZ CIECZKO
Poland
Bed 160×80 packed in one cardboard box with dimensions of 165cm x 37cm x 13cm, weight 28.6 kg. Bed 180 × 80 packed in one cardboard box with dimensions of 184 cm x 35 cm x 12 cm, weight 29.6 kg. Possibility of a drawer (separate carton).
Request for a quoteZAKŁAD STOŁARSKI ŁUKASZ CIECZKO
Poland
With the possibility of mounting a drawer. Possibility of engraving on HDF board
Request for a quoteZAKŁAD STOŁARSKI ŁUKASZ CIECZKO
Poland
It has 3 removable rungs, 3 levels of bottom regulation Drawer can be installed Possibility of engraving on MDF board Possibility of installing a railing-enabling the cot to be converted into a couch Size of the package: Without drawer 1240x700x130mm, weight 14kg With drawer 1240x700x140mm, weight 23kg
Request for a quoteZAKŁAD STOŁARSKI ŁUKASZ CIECZKO
Poland
The cots have three removable rungs, three levels of bottom adjustment, Can be converted into a couch. Possibility of engraving on HDF board.
Request for a quotePHSC CHEMICALS SP. Z O.O.
Poland
Hydrogard S is a single-component, colourlessly drying preparation based on silanes and siloxanes in a solvent-based system, applicable for waterproofing of absorptive substrates of concrete, reinforced concrete used in road and bridge constructions, railroads, hydraulic inland and marine engineering objects, and in general constructions, including commercial, industrial and housing constructions as well as sports arenas and airport apron areas. NATIONAL TECHNICAL APPROVAL Road and Bridge Research Institute No. IBDiM-KOT-2021/0749
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
PHSC CHEMICALS SP. Z O.O.
Poland
KTX 05 strong is a single-component, water-based product containing microcrystalline- wax. It is colourless after drying and is used for protecting surfaces against graffiti. The coated surface is protected against aerosol spray paints, water-based markers, atmospheric pollution, dirt, acid rain and moisture. On application, KTX 05 strong accumulates on capillaries and pores' walls as a separating layer, which makes the surface impermeable to water and reduces adhesiveness of paints/pigments. It is applicable in 1 layer. KTX 05 strong is a hydrophobic preparation, has preservative properties as well as UV filters, thanks to which the colour of the protected surface remains unchanged. It reduces mineral substrates’ permeability to water and harmful substances. The substrate colour tone becomes slightly deeper, while the gloss decreases a little with the surface texture remaining unaffected. Availabe in a semi-matte version.
Request for a quotePHSC CHEMICALS SP. Z O.O.
Poland
Hydrogard W is a single-component, colourlessly drying preparation in a water-based system and in concentrated form, applicable as hydrophobic impregnation of absorptive substrates of concrete, reinforced concrete, used in road and bridge constructions, railroads, hydraulic inland and marine engineering objects, and in general constructions, including commercial, industrial and housing constructions as well as sports arenas and airport apron areas. NATIONAL TECHNICAL APPROVAL Road and Bridge Research Institute No. IBDiM-KOT-2021/0749
Request for a quotePHSC CHEMICALS SP. Z O.O.
Poland
Principal characteristics and qualities of KTX 30 coating: • a durable isomorphic system allows repetitive removal of graffiti; • single-component preparation – does not require component mixing, does not generate losses caused by the curing of coating that was not used in a specific time – easy application; • creates a thin (approx. 2 - 5 μm), transparent layer of anti-graffiti coating that is easy to wash out; • 1 coating layer ensures full protection; • quick drying – the coating becomes dry in 15 minutes; • exceptionally high efficiency – up to 111 m²/L; • vapour permeable; • graffiti removal with chemical removers; • anti-adhesive, facilitates tape and poster removal; • UV-resistant, does not turn yellow; minimum 10-year durability; • chemical resistance; • anti-static properties; • finishing variants: • matt or gloss; • renews damaged, fogged or oxidised surfaces and restores their natural gloss;
Request for a quotePHSC CHEMICALS SP. Z O.O.
Poland
KTX 05 is a one-component and water-based product which is colorless after drying and is used for protecting surfaces against graffiti. The coated surface is protected against aerosol spray paints, water-based markers, atmospheric pollution, dirt, acid rain and moisture. After application, KTX 05 accumulates on capillaries and pores’ walls as a separating layer, which prevents penetration into the substrate and reduces adhesiveness of paints/pigments. The coating is performed using two layers. KTX 05 is a hydrophobic preparation, has preservative properties as well as UV filters, thanks to which the colour of the protected surface remains unchanged. It reduces mineral substrates’ permeability to water and harmful substances. The substrate colour tone becomes slightly deeper, while the gloss increases a little with the surface texture remains unaffected. Available in a semi-matte version. KTX 05 has been awarded Technical Approval of IBDiM: No. AT/2016-02-3286.
Request for a quotePHSC CHEMICALS SP. Z O.O.
Poland
KTX anti-poster prevents various glues from penetrating into the protected surface. It causes stickers, labels, posters and tapes, regardless of the type of glue, to stick to the substrate very poorly. It makes it very easy to unstick the labels and posters, and there are no traces of glue remaining on the surface. Sometimes just rain is enough to cause the posters to come off. The anti-poster coating is perfect for protecting urban infrastructure: lamp posts, street lights at crossroads, electricity and telecommunication casings etc.
Request for a quotePHSC CHEMICALS SP. Z O.O.
Poland
PX 07 is a single-component, colourlessly drying dispersion of styrene-acrylic copolymer. It is used for priming absorptive, mineral substrates before application of anti-graffiti coating, which minimises or prevents the covered surface form darkening. It also enhances and evens out its absorptiveness. The product perfectly penetrates into the surface while improving its adhesive properties thanks to small size dispersion particles. PX 07 allows diffusion, has hydrophobic properties, protects the surface from penetration by hazardous substances and is UV and erosion resistant.
Request for a quoteResults for
Varnishes - Import exportNumber of results
24 ProductsCountries
Company type
Category