Pneumatic screwing tools - Import export

The VSA stands as an independent capping machine featuring an intuitive touchscreen. While this capper can function autonomously, it also offers seamless integration into various CDA machines, including fillers (K-Net Auto, K-Line S), or comprehensive packaging lines. Multiple closing modules can be incorporated into this machine, including: The VS 400 (with tribological or lug screwing head), The VS 500 (featuring natural rubber screwing strips), The pusher (equipped with a stainless steel buffer), The crimper (designed for suitable crimping). The VSA allows for various closing configurations by combining up to two types of cappers, such as a VS400 with a pusher or a VS400 with a VS500. The choice depends on your project specifications and the cap requirements of your products. Manual placement of caps on the container before sealing is conducted by the operator.

Pneumatic gripper with 2 or 3 concentric fingers Single acting with rear central air connection High clamping force External clamping and vertical using only Without detection Screwing gripper technology The technology of this gripper allows it to develop a very large clamping force (about 10x the force of a gripper) so as to obtain the necessary tightening torque in the following applications – screwing cosmetic or hygiene bottles, with or without spout – screwing of pots or cans with torque control – screwing of thermostatic subassemblies – screwing push buttons The central rear pneumatic supply and single acting makes it easy to mount on a rotating joint. Screwing bottles with pump spoutThe wide angle opening version is generally used for screwing vials with pump spouts. The 2finger version makes it possible to tighten square or prismatic caps, but also to reduce cycle time by let go the bottle radially by opening the gripper at the height of clamping

Inductive and mechanical limit switches for the optional attachment to pneumatic piston actuators.

Electrically controlled pilot valves for direct mounting on pneumatic valve actuators.

Pneumatic gripper with 2 concentric fingers Finger selflocking closed gripper (toggle joint action) Elastic absorption at opening Interest of 180 ° angle grippers Grippers with 180° opening angle are generally used to suppress a clearance movement because the open fingers allow the product to pass laterally, for example during a linear transfer or for maintaining a product on a turntable. Selflocking on closing by toggle effect These grippers use toggle technology that allows selflocking of the jaws in the last degree of closure and a large clamping force. They therefore remain locked even in the absence of air pressure. They can only be used for a grip from outside the piece and for parts with an identical grip dimension. The detection cam mounted on the axis of rotation allows the 2 inductive sensors to detect any desired position. The option « opening screw limitation » allows to adjust the opening stroke if the 180 ° are not sought

Handling pneumatic gripper with parallel clamping with 2 concentric fingers. The guide is prismatic and mechanism is completely protected. Benefits of 2finger parallel tightening The clamping of these parallel grippers is the most polyvalent clamping it allows to take pieces of slightly different sizes with the same jaws, to grab a piece in a limited space at opening, to seize the part by the inside or the outside … For very different sizes of parts, it’s possible to grip them without changing jaws with Type 25 parallel long stroke grippers. Reliability and robustness of Type 24 parallel grippers With a hard anodized body and cylinder, prismatic steel guide, fully protected mechanism, these pneumatic parallel grippers are robust and reliable. The positions are detected by magnetic detectors (delivered separately) thanks to 2 Tgrooves on the upper face of the cylinder. This groove is compatible with many detectors on the market to facilitate maintenance.

Motorization by integrated pneumatic cylinder Driving by rack and pinion system Adjustable mechanical stops Hydraulic shock absorbers Inductive sensors The wrist of a manipulator arm These rotary modules are, for example, the wrist of a manipulator arm, the turner of parts on a conveyor or the axis of rotation of an oscillating manipulator. In general, they rotate the gripper that grips the part. These modules are equipped with hydraulic dampers and inductive sensors, the rotation guidance is ensured by 2 ball bearings that allow this module to be used in all directions, even with offcentered payload. Rotary cylinder without angular play at end of stroke The end stops located under the plate allow there to be no shock in the rack and pinion transmission and no angular play at the end of the stroke. The absence of angular play allows use in assembly or precise positioning applications with 2 positions and the absence of impact in rack

Pneumatic retractable stop Locking by toggle joint action Adjustable stop screw Operating principle of the retractable stop This retractable stop is drived by a doubleacting pneumatic cylinder. It is retracted by a 90 ° rotation of the finger. When it is engaged to stop the moving element, it is mechanically locked by a toggle joint action. The retractable finger supports an impact force of 2250 N or less, it is generally necessary to provide damping at the point of contact (elastic or hydraulic depending on the application). Detection by 2 inductive Ø8 detectors is optional. Using of the retractable pneumatic stop There are 3 common applications for this retractable stop • Create an intermediate position for a manipulator or a linear pneumatic gantry • Create a conveyor stop • Referencing a product on a workstation For an intermediate position of the pneumatic manipulator, a hydraulic shock absorber must be placed opposite the stop screw.

Standard rivets Ø 4,8 only in aluminium. Multifar rivets Ø 4 only in aluminium. Maximum force 5372 N. Stroke 19 mm.

From factory air line to pneumatic tool connection, available in various body materials, sizes and end configurations. Excellent durability. An excellent general purpose coupling for connecting factory air supply to pneumatic tools. Steel coupling is suitable for air. Brass or stainless steel are suitable for water. Note that fluid will come out from the plug when disconnected. Critical structural parts of steel models are heattreated for increased strength giving greater durability and resistance to wear. Available in various body materials, sizes and end configurations applicable to a wide range of applications.

-Pneumatic cylinders -Solenoid, Pilot, manual and mechanical operated directional control valves -Flow control valves -ISO and Micro valves -Pneumatic hoses -Air treatment units -Piston operated valves and pulse solenoid valves -One touch plastic - metal - stainless steel fittings -Pneumatic accessories

ENIGMA pneumatic elements are built to meet the toughest requirements for holding workpieces in place. Workpieces are fixed in almost all applications of a production environment. In the metalworking industry, welding, bending, grinding, testing, assembly, etc. is a basic requirement. Workpieces need to be held with a certain pressure force in a programmed process as soon as possible. After the workpiece is clamped, it is usually machined.