Pneumatic regulators - Import export

The pressure regulator type 8042 is a smart combination of a pilot pressure regulator with a sliding gate control valve and is excellently suited for gases and vapors. The pressure regulator, which operates with auxiliary pneumatic energy, is characterized by highest dynamics and control quality. External or manual set point adjustment completes the compact and simple design of the valve and regulator.

Pneumatic timers are used for the precise time control of pneumatic signals in pneumatic circuits or systems. The pressure-independent function of time delay starts when pressure is applied to the control port. After the pre-selected time is elapsed, an internal 3/2 way valve is switched. The pneumatic timer is reset to the initial condition if the control port is vented for at least 300 ms. The adjustable time delay depends on the chosen version and amounts between 0.5 and 180 s. Due to its design the control pressure level must not be below working pressure level. As a result of the fire-risk evaluation according to EN 13463-1, the pneumatic timers are not subject to ATEX regulations. This means they may also be used in explosion hazardous areas as defined in IIG/ IID.

The simple and compact design of this miniature PE converter with fixed switch-on pressure of 0.8 bar allows its use in various applications such as medical technology, dental treatment units, robotics, analysis systems, process and safety engineering. Easy mounting and high functional reliability are other advantages. By using silver contacts a long lifetime can be ensured even at high switching frequencies. As a result of the fire-risk evaluation according to EN 13463-1, the pneumatic timers are not subject to ATEX regulations. This means they may also be used in explosion hazardous areas as defined in IIG/ IID.

The simple and compact design of this miniature PE converter with fixed switch-on pressure of 0.8 bar allows its use in various applications such as medical technology, dental treatment units, robotics, analysis systems, process and safety engineering. Easy mounting and high functional reliability are other advantages. By using silver contacts a long lifetime can be ensured even at high switching frequencies. As a result of the fire-risk evaluation according to EN 13463-1, the pneumatic timers are not subject to ATEX regulations. This means they may also be used in explosion hazardous areas as defined in IIG/ IID.

In the tried-and-tested, gasketed design, the EC-series offers many benefits to the user on top of its ease of operation. Due to the internal drainage, use in even the most hygienically clean areas is possible. The press lock is performed by an automatically self-regulating pneumatic/hydraulic closing system. The automatic closing pressure maintenance ensures that the plate pack always remains closed. An adjustable pressure switch with a potential-free contact is provided for integration into the customer's control system. This prevents the feeding pump from running uncontrollably. Also, as with all AQUACHEM filter presses, the discharge manifold can be generated here at the customer's request. Due to the gasketed design, the seamless backflushing of the filter media in the filter press is possible. The filter press frame is phosphated and powder-coated, offering a high level of protection against external influences.

The semiautomatic sealing device PolySeal Vario PN is suited for the sealing of all sorts of plastic and glass containers. electro-pneumatic stepless pressure regulation sealing head heatig block, swingable, anodised aluminium hollowed out sealing die heat protection shield stabiliser roller guide with running slide container holder, adjustable container holder optional (see picture) VARIOTRONIC - regulation of temperature, sealing time and pressure The sealing device is modularly upgradeable to the PolySeal Vario Twin.

New pneumatic packing machine bar welding with pneumatic regulation of the height of the head for closing in low of the envelopes. Ideal for welding envelopes for different measures of clotes for more transport cleaning and sure.

This packing machin is used in the packaging sector because it allows of enveloped the clothes both in the superior part and in that inferior. The superior machine can welding both horizontal and tilted (--/. Today with this new model is possible the regulation pneumatically of the height of the inferior settling bar, finally finding an application in the laundry.

1,500 BAR (21,750 PSI) SUBSEA & LARGE TENSIONER APPLICATIONS High flow tension pump. Corrosion resistant frame works well for applications near salt water. High flow ideal for subsea applications where compressed air is the required power source. Quality means Lower Life-Cycle Costs: Over 100,000 cycles Continuous duty up to 50°C (122°F) ambient Proven design = Proven reliability Enhanced Usability: Calibrated 150mm (6") Pressure Gauge Dual oil outlets with quick-connect, no spill couplings Pneumatic Filter/Regulator/Lubricator included Stainless Steel carry frame Designed with Safety in Mind: Easily adjusted pressure regulator valve Air pressure safety relief valve

TOPSIDE BOLT TENSIONER & HYDRAULIC NUT PUMP Standard flow tension pump. Corrosion resistant frame works well for applications near salt water. Standard flow ideal for land based (topside) tension applications where the required power source is compressed air. Quality means Lower Life-Cycle Costs: Over 100,000 cycles Continuous duty up to 122°F (50°C) ambient Proven design = Proven reliability Enhanced Usability: Calibrated 6" (150mm) Pressure Gauge Dual oil outlets with quick-connect, no spill couplings Pneumatic Filter/Regulator/Lubricator included Stainless Steel carry frame Designed with Safety in Mind: Easily adjusted pressure regulator valve Air pressure safety relief valve

Marks cables 10 to 220 mm in diameter. Marking by means of engraved, concave marking wheels matching the cable diameter. Marking wheels mounted on toe bearings on two horizontally and vertically adjustable swivel arms. The embossing pressure is adjustable by means of a pneumatic device with fine pressure regulator. Hose connection for marking wheel-cooling system that prevents hot insulation material from sticking to the marking wheel type area. A water-collecting tub is arranged below the embossing wheels. SPECIFICATIONS Max. printing speed: 100 m/min Product diameter: 10 mm to 220 mm Marking wheels: 121 mm in diameter (groove bottom) ACCESSORIES Marking wheels Pressure rolls

SEAMIAUTOMATIC SEALING DEVICE suitable for the sealing of all sorts of plastic and glass containers. 1. foil application device PolySeal Vario DIS (left hand side) • electro-pneumatic • stepless pressure regulation • stepless manual height adjustment with height scale • foil dispensing with 2 spot pre-sealing • removable pre-sealing plates • heat protection shield • vacuum suction nozzle • roller guide with running slide • foil magazine for stackable pre-cut sealing lids • VARIOTRONIC, control unit for the regulation of temperature, sealing time and pressure 2. sealing device PolySeal Vario PN (right hand side) • electro-pneumatic • stepless pressure regulation • stepless manual height adjustment with height scale • sealing head heating block, swingable, anodised aluminium • hollowed out sealing die • heat protection shield • container holder • VARIOTRONIC, control unit for the regulation of temperature, sealing time and pressure

The semiautomatic sealing device PolySeal Vario PN is suited for the sealing of all sorts of plastic and glass containers. • electro-pneumatic • stepless pressure regulation • sealing head heatig block, swingable, anodised aluminium • hollowed out sealing die • heat protection shield • stabiliser • roller guide with running slide • container holder, adjustable container holder optional (see picture) • VARIOTRONIC - regulation of temperature, sealing time and pressure The sealing device is modularly upgradeable to the PolySeal Vario Twin.