Pneumatic motors - Import export

The very different requirements created by diverse welding techniques mean that specific products have to be specially developed. The industrial fabrics we use have specific coatings that leave the cover flexible but resistant to spatter and weld splashes. Their para-aramid base has excellent mechanical strength. Production tooling protection is a necessity. ASP offers a wide range of protective covers for all types of welding guns, regardless of the welding technology involved (pneumatic, hydraulic or electric motor).

A flow valve is a critical component in various systems where the regulation of fluid flow is necessary. It’s designed to control the rate at which fluid passes through a system, ensuring that the flow matches the requirements of the application.Flow control valves are essential in industrial usage, hydraulic systems, and pneumatic systems. They play a crucial role in regulating the flow of fluids, ensuring optimal performance and efficient operation of machinery and equipment. Control valves can be actuated in various ways, including pneumatically, hydraulically, or with electric motors. Some valves, known as automatic control valves, do not require an external power source and operate solely on fluid pressure.When selecting a flow control valve, it’s important to consider factors such as flow rate and pressure requirements, material compatibility, and environmental conditions.

These are flexible shafts with cylindrical pin or thread to connect to: Drilling machines, pneumatic motors, lathes, cutters, straight grinders, angle grinders, other electric- or pneumatic driving units

For driving the FLUX pump a wide range of electrical to pneumatic motors is available. Even if you work in hazardous areas or with flammable liquids. Depending on the application, different pumps can be driven by different motors. Thus, the output of a drum pump depends, among other things, on the power of the motor. Here you will find the most economical and safest drive solution for your application. Battery motor: FBM-B 3100 Commutator motors: FEM 3070 FEM 4070 F 457 F 458 F 460 Ex Compressed-air motors: F 416 Ex FPM

Strong plasmaburned back plate provides smooth and straight operation Removable and adjustable hub disk Fast and precise expansion via bevel gear with exceptionally wide ranges, allows clamping of all internationally common coil sizes From 1000 kg capacity equipped with lever type expansion Alternatively with guide rod coil fixation instead of expansion system (mainly for pallets) Pneumatic hold down arm Motorized pivoting Electropneumatic brake system Larger mandrel segments Traveling feature Different loading heights Various expansion ranges Different back plate sizes Loop control systems

HIgh Speed Automatic Rotary Piston Filling Machine is designed for meeting the high capacity packaging demand, Once production requirements exceed the capability of inline piston fillers. it works on same volumetric principle with the inline piston filler,with rotary head, syringe, piston & nozzle. Features: The main frames and construction is made of 304SS Robust, Sanitary design construction with automatic CIP cleaning function Mechanical cam and nozzles design, which ensure the working more stable. Controls platform: Siemens Gears and motors: SEW Germany Pneumatics: Festo Germany or SMC Sensors: Banners “No bottle – no fill” device with anti-breakage safety Pistons entirely in stainless steel, Cylinders in high thickness stainless steel No tool removal of pistons and valve plugs No dead corner, food grade.

- Size 150 - 200 - 250 - 300 - 350 - 400 - 500 - 600 - 700 - 800 mm - One-piece valve body in carbon steel or AISI 304 - Square section packing seal, compressed between two stainless steel profiles held in place by two aluminum flanges that allow easy access, maintenance and adjustment of the packing, even with the valve installed - Invitation hopper for the passage of the product - Given its compact and robust structure, it is also suitable for heavier applications with materials such as gravel, sand and coal - ATEX certified version upon request - Pneumatic, manual or motorized actuators

- Size DN100 - 150 - 200 - 250 - 300 - 350 - 400 - 2 half-bodies in cast aluminum with double flange: identical upper and lower flange - Possibility of installing the fitting for flexible connection SFU - Pressure / vacuum seal up to 0.2 bar - Disc in aluminum or stainless steel AISI 304 (upon request in AISI 316) - NBR gasket (upon request suitable for contact with food) - HNBR Therban - Viton - Gasket profile: for sealing only on the disc or covering the flanges - DN5482 splined drive shaft or ISO 5211 square, both in standard or extended length - ATEX certified version upon request - Manual, motorized or pneumatic actuators

HIgh Speed Automatic Rotary Piston Filling Machine is designed for meeting the high capacity packaging demand, Once production requirements exceed the capability of inline piston fillers. it works on same volumetric principle with the inline piston filler,with rotary head, syringe, piston & nozzle. Features: The main frames and construction is made of 304SS Robust, Sanitary design construction with automatic CIP cleaning function Mechanical cam and nozzles design, which ensure the working more stable. Controls platform: Siemens Gears and motors: SEW Germany Pneumatics: Festo Germany or SMC Sensors: Banners “No bottle – no fill” device with anti-breakage safety Pistons entirely in stainless steel, Cylinders in high thickness stainless steel No tool removal of pistons and valve plugs No dead corner, food grade.

PNEUMATIC CENTERING DEVICE WITH MOTORIZED ROLLERS (MOD. CP-FM) MANUFACTURERS VERSION Feeder - centering device useful for centering boxes max width mm. 650 and max weight kg. 50. Can be combined with automatic taping and labeling machines. The box centering machine mod. CP-FM consists of a motorized roller conveyor and two pneumatically operated side guides. The metal parts are painted with epoxy powder while the other components are galvanized. The pneumatic centering device with motorized rollers is a module for builders to be completed and adapted to an automatic line. It is available in two versions: Manufacturers version and "plug and play" version: In the "manufacturers" version, the centering device is supplied complete with: - Motorized roller conveyor with start and stop button and emergency mushroom, at a fixed speed of 15 meters / minute - Pneumatic tail lifts and compressed air system up to the gate movement management valve.

Fully automatic operation cutting of aluminium and non-ferrous metal NC Control with touch screen display 5,7” Piece counter showing target/actual number of pieces Piece multiplier when cutting bundles Indication of cycle time Multiple feed device – max feed 3.250mm Table separation before the saw blade retracts so the profile is not touched by the saw blade Electronic material feeder, ball screw spindle and servo motor incl. pneumatic horizontal and vertical clamps Float mounting feeder to balance bend profiles Waste piece from 85mm Reducer of clamping pressure horizontal and vertical Cycle spray mist device with level indicator and automatic stop Cut-off length from 3mm Automatic cut-out when bar is finished Technical Data: Motor up to 18,5kW, S 6 40%, 400 V, 50 Hz, 2850 R.P.M. r.p.m. infinitely adjustable Saw blade speed 3.500 – 5.800 R.P.M Saw blade Ø 400mm Profile width max 200mm height max 120mm

Our vibration motors are manufactured using top-quality metals, such as a special blend of aluminium injection and ductile ggg 40 cast iron, in an IP66 protection standard. They offer various speed, frequency, and voltage options for maximum efficiency. We conduct thorough analyses, tests, and research and development studies before and after casting to produce premium-quality products. Vibration motors are a type of motor that generate vibrations using electrical or pneumatic energy. Vibration motors are utilized in various industrial machines that require vibration energy such as food and flour factories, construction, subways, motorways, hydro power plants, forced water tunnels, steel mills, concrete factories producing prefabricated elements, mining, and asphalt and cement plants. Additionally, they are employed in the operation of sand dewatering machines, recycling plants, steel and similar silos, feeders, sieves, vibratory discharge channels, compaction and flow processes.

Motorized rotation Hydraulic wedge type expansion Highend arbor with double bearing Extremely stiff design SHDH Series PullOff Reel with manually adjustable brakes SHDR Series Payoff Reel with threephase motor Pneumatic or hydraulic hold down arms Electromotive or hydraulic traveling feature w optional automatic centering Hydraulic coil car and fullsize back plates Conical keeper rolls w optional motorized travel Larger mandrel heights and segments Vectorcontrolled drive systems for heavy coil weights Servo drive and control systems, etc.

FEATURES High power centrifugal fans up to 4400 m3/h. Visual filling indicator. Continuous work cycle with no maintenance requirement. Structure entirely made of steel. Anti-return wheels with parking brake. Class M polyester filter. Container capacity: 160 Lt. Quick release for opening the container. Filter agitation with integrated pneumatic motor (OPT). Silencer to reduce vacuum noise level in accordance with standards.

Single-head ascending mitre saw with automatic blade lift. Trimming option. Accessories: pair of vertical pneumatic clamps, integral blade guard, cutting square, air filter, air gun, service keys, horizontal pneumatic clamps, three-phase motor, 450 mm carbide blade, laser pointer with side supports, digital display.

CMK 95/65-S4 Station Thermoforming Machine is eligible to form round and rectangular shape lids, plates and trays, single or mu iti compartment containers, hinged lid containers, leaking-proof containers, egg viyole, flower pots and seeding trays. Machine has the bigger forming area than 85 series station machine, and it is better if high is targeted. Machine adopts the latest thermoforming technology itself and intelligent control. This model combines maximum speed and bulk production, high quality and efficiency, and low consumption in energy. lts mould is equipped to perform well with polymer plastics as well as biodegradable plastics. OTHER TECHNICAL SPECIFICATION AII units are fully automatic Movable touch control panel Screen size 15″ and colour Electricity panel assembled to the machine and cooling by AC Ethernet portal Possible to store different mould settings Convenient and fast mould change and pneumatic fixing Pneumatic control systems with servo motors

CMK 95/65-S3 Station Thermoforming Machine is eligible to form round and rectangular shape lids, plates and trays, single or mu iti compartment containers, hinged lid containers, leaking-proof containers, egg viyole, ete. Machine has the bigger forming area than 85 series station machine, and it is better if high capacity is targeted. Machine adopts the latest thermoforming technology itself and intelligent control. This model combines maximum speed and bulk production, high quality and efficiency, and low consumption in energy. lts mould is equipped to perform well with polymer plastics as well as biodegradable plastics. OTHER TECHNICAL SPECIFICATION AII units are fully automatic Movable touch control panel Screen size 15″ and colour Electricity panel assembled to the machine and cooling by AC Ethernet portal Possible to store different mould settings Convenient and fast mould change and pneumatic fixing Pneumatic control systems with servo motors

Motorization by integrated pneumatic cylinder Driving by rack and pinion system Adjustable mechanical stops Hydraulic shock absorbers Inductive sensors The wrist of a manipulator arm These rotary modules are, for example, the wrist of a manipulator arm, the turner of parts on a conveyor or the axis of rotation of an oscillating manipulator. In general, they rotate the gripper that grips the part. These modules are equipped with hydraulic dampers and inductive sensors, the rotation guidance is ensured by 2 ball bearings that allow this module to be used in all directions, even with offcentered payload. Rotary cylinder without angular play at end of stroke The end stops located under the plate allow there to be no shock in the rack and pinion transmission and no angular play at the end of the stroke. The absence of angular play allows use in assembly or precise positioning applications with 2 positions and the absence of impact in rack

RM2M offers a range of spring hose reels for fluids with either a fixed or swivel wall mount. The range is as follows: Painted steel reels. Maximum capacity 30m in 1''. Also available with 3/8'', ¼'', 1/2'', and ¾'' hose. For water and air. Maximum pressure 20 bar. Also available in 304 stainless steel version (not for food processing). Versions for hot water 130°C – 100 bar. Versions for hot water 130°C -200 bar. Versions for hot water 130°C -400 bar. Versions for oil 150 bar. Versions for grease 600 bar. Versions for diesel 10 bar. Versions for ADBLUE 10 bar. Versions for two identical hoses (simultaneous circulation of air and paint, for example). Versions for welding. Versions for LPG or methane. In addition to spring-retractable models, we can also offer motorized versions (hydraulic, pneumatic, electric (24VDC)) or manual versions with handle.

The GEMÜ 566 2/2-way globe control valve has a body with an integrated control mechanism which can be controlled by various operator types. In addition to a pneumatic version, manual and motorized versions are also available. The GEMÜ 566 valve was specially developed for the control of small quantities and enables flow rates from 63l/h to 2500 l/h. —Control of liquid media from 63 l/h to 2500 l/h —Linear or equal-percentage control characteristic options —Three operator types selectable (manual, pneumatic, motorised)

This production cutting machine is available as a manual and as a pneumatic variant. Its cutting motors ensure optimum cutting results thanks to their unique minimum vibration. 4.6 kW drive. For hydraulic hose assemblies up to 2” and industrial hose assemblies up to 4”. Unique drive motor with double bearings and oversized shafts •Reduce scrap with straight cuts •More cuts between sharpening while increasing profits •Less contamination in the shop and in the end product will result in more parts out the door and a better environment in the building •Maximizes motor life, giving you the lowest cost of ownership in the market •Cut faster and generate a more saleable product Quality steel blade •Long lasting German quality steel blades, lowering the cost of ownership Compact design •Ideal for a mobile service CE compliant •Brake motor for safety •Security shield

Embossing punching is an important technique in the automated production of car parts, guided by robots. A laser system with a sensor harness measures the car body and its machining plane so that the embossing depth can be determined with maximum accuracy. The car body part is then embossed accordingly and all necessary holes are punched. Embossing punching is used for the fixture of headlights, bonnets, sliding roofs, boot lids and locks as well as wings. Our embossing punching machines are suitable for single-layer steel and aluminium sheet metal. This offer includes: • Embossing punching frame (assembly elements or components can be perfectly aligned to a mating part of different dimensions) • Handling: robot-guided via defined interfaces (mechanical, electrical, pneumatic) • Servo motor-driven Tool inserts and measurement are not included in the scope of delivery. They must be chosen separately, based on the actual task. Contact us for a customised offer!

Domes produced with ECKOLD machines in automotive industry make sure that there is only a minimum offset between the securing screws and the surrounding metal. ECKOLD machines can produce two or even three domes in a single process. Our dome embossing machines are suitable for both single and double sheet steel or aluminium parts and come with a hydro-pneumatic or servo motor drive system. With our machines, domes can be embossed without preliminary holes (even when combined with final hole punching for a defined diameter). This offer includes: Dome embossing frame Embossings: 1 piece/stroke Embossing geometry: according to data set Drive: pneumohydraulic Mechanical interface: support stand Embossing inserts are not included in the scope of delivery. They must be chosen separately, based on the actual task. We optionally offer hydraulic or servo motor drives as well as multiple embossings/stroke.

Volumetric filling system is suitable for products which are able to free falling and homogenous in density. Weight of each filling is controlled by adjusting the dimensions of filling cups. Different cups with adjustable dimension should be used for different type of products.The sensitivity of target weight is equal to sensitivity of product density. All surfaces touching to products are AISI 304 stainless steel. Easy dismountable collar set design. Package length should be controlled by print mark or feeding duration. Printer state is checked continiously. Wrapping material is driven by AC motors. Pneumatic driven horizontal sealing and cutting. Impulse or heat sealing units for different type of wrapping materials. Suitable for CE standarts. 7 inch touch screen wtih several languages. Optional Fittings and Equipments Gas flushing system. Product feeding screw. Finished product conveyor Special Vacum supported belts. (Increases belt life time and machine speed)

Suitable for granule type of products. The weighing unit iscontrolled by a seperate microprocessor and touch screen.Supports many usefull functions such as multi dumping,automatic product conveyor control, self cleaning,reciperecord for different products, different language and etc. Different amount of weighing buckets in different dimensions should be provided with respect to type of product. Parts touching to products are easy to dismount and cleaning. All surfaces touching to products are AISI 304 stainless steel. Easy dismountable collar set design. Package length should be controlled by print mark or feeding duration. Printer state is checked continiously. Wrapping material is driven by AC motors. Pneumatic driven horizontal sealing and cutting. Impulse or heat sealing units for different type of wrapping materials. Suitable for CE standarts. 7 inch touch screen wtih several languages.

Suitable for granule type of products. The target weight is controlled by linear vibration units. With respect to product type and desired speed; 2 or 4 line types are available. The magnitude of vibration level for each line is adjustable. The accuracy of each filling is controlled by tuning each line vibration magnitude. The average accuracy is depend on product type. All surfaces touching to products are AISI 304 stainless steel. Easy dismountable collar set design. Package length should be controlled by print mark or feeding duration. Printer state is checked continiously. Wrapping material is driven by AC motors. Pneumatic driven horizontal sealing and cutting. Impulse or heat sealing units for different type of wrapping materials. Suitable for CE standarts. 7 inch touch screen wtih several languages.

The machine is designed for powder and similar fine products. The target weight of each filling is Controlled with fast and accurate servo driven specific auger (worm screw). The auger type and diameter changes with respect to product type and target weight. All surfaces touching to products are AISI 304 stainless steel. Easy dismountable collar set design. Package length should be controlled by print mark or feeding duration. Printer state is checked continiously. Wrapping material is driven by AC motors. Pneumatic driven horizontal sealing and cutting. Impulse or heat sealing units for different type of wrapping materials. Suitable for CE standarts.

Technical data Dimensions (L/W/H) 121/92/164 cm Total weight 370 kg Equipment Continuous seat height adjustment via pneumatic springs or electric motor (optional) Laser pointer for the correct positioning of the rotation axis Continuous adjustment of the hip stabilizer for optimal pelvic stabilization (seated position) Continuous height adjustment of the lateral upper body stabilizer (seated position) Continuous adjustment of lateral upper body stabilizer for optimal fixation (seated position) Adjustment of the start position in 10° increments Very fine weight gradation in 1 kg increments Measuring sensor for isometric measurements Measuring sensor for measurement of mobility Protective panel made of frosted glass Options Pre-installed network equipment in compliance with the German Medical Devices Act (Medizinproduktgesetz) Proxotrain tergumed module Proxotrain Info point Computer trolley

Technical data Dimensions (L/W/H) 126/150/164 cm Total weight 400 kg Equipment Continuous seat height adjustment via pneumatic springs or electric motor (optional) Continuous adjustment of footrest (seated position) Continuous height adjustment of the knee stabilizer Continuous adjustment of knee stabilizer for optimal fixation (seated position) Continuous adjustment of pelvic stabilizer (seated position) Continuous adjustment of shoulder stabilizer (seated position) Adjustment of the start position in 10° increments Very fine weight gradation in 1 kg increments Rotatable and tiltable SmartPanel with training software Measuring sensor for isometric measurements Measuring sensor for measurement of mobility Protective panel made of frosted glass Options Pre-installed network equipment in compliance with the German Medical Devices Act (Medizinproduktgesetz) Proxotrain tergumed module Proxotrain Infopoint Computer trolley