Pneumatic components - Import export

— Whitworth pipe thread — Chambered O-ring — Sealing NBR, FKM — Material brass nickel-plated — Temperature range 32 to 122 °F (0 to +50 °C) — Working pressure range -13 to 218 psi (-0,9 to 15 bar) — Speed 800 rpm — Hybrid stainless steel ball bearing with ceramic balls

— Whitworth pipe thread- Chambered O-ring — Sealing NBR — Material brass nickel-plated — Temperature range -4 to 176 °F (-20 to +80 °C) — Working pressure range -14 to 232 psi (-0.95 to 16 bar)

- Whitworth pipe thread - Thread G2 for manual override - Chambered O-ring - Sealing: NBR - Material: brass nickel plated, Al black anodized - Allowable medium: air - Temperature range 14 to 158 °F (-10 to +70 °C) - Working pressure range 14,5 to 145 psi (1 to 10 bar) - Nominal flow rate measured when throttle is open at 87 psi (6 bar) and 14,5 psi (1 bar) pressure drop between inlet and exhaust

— Whitworth pipe thread — Chambered O-ring — Sealing NBR, FKM — Material brass nickel-plated — Temperature range 32 to 122 °F (0 to +50 °C) — Working pressure range -13 to 218 psi (-0,9 to 15 bar) — Speed 800 rpm — Hybrid stainless steel ball bearing with ceramic balls

- stainless steel 1.4301 - working pressure von 2 bis 10 bar - pressure range von 2 bis 8 bar - flow-optimised - fine adjustment of pressure - quiet operation - suitable for water and air applications - 1/8 inch thread

At SPOLMONT s.r.o., we specialize in providing comprehensive solutions for compressed air systems, ensuring efficient and reliable performance for various industrial applications. Our expertise in the installation and assembly of pneumatic components is particularly valuable in the automotive industry, where precision and reliability are paramount. Our Services Include: Installation of Pneumatic Parts in the Automotive Industry: Expert installation of pneumatic parts designed for the automotive sector, with systems operating at 6bar and 12bar pressure levels. Complete Assembly of Grippers and Tables: Professional assembly of grippers and tables tailored to specific industrial requirements. Utilization of high-quality components to ensure durability and efficiency. Assembly of Pneumatic Components: Specialized assembly of pneumatic components for automotive applications, including both pneumatic and electro-pneumatic systems.

Compressed air preparation helps to prevent malfunctions on pneumatic components and increases their service life. Machine failures and downtimes are reduced. Whether compressed air preparation, regulation or cleaning, we have multi-part service units, from pressure regulators, filter controllers, oilers, condensate diverters and oil-water separators to system expansions and various accessories as well.

Compressed air preparation helps to prevent malfunctions on pneumatic components and increases their service life. Machine failures and downtimes are reduced. Whether compressed air preparation, regulation or cleaning, we have multi-part service units, from pressure regulators, filter controllers, oilers, condensate diverters and oil-water separators to system expansions and various accessories as well.

Compressed air preparation helps to prevent malfunctions on pneumatic components and increases their service life. Machine failures and downtimes are reduced. Whether compressed air preparation, regulation or cleaning, we have multi-part service units, from pressure regulators, filter controllers, oilers, condensate diverters and oil-water separators to system expansions and various accessories as well.

Compressed air preparation helps to prevent malfunctions on pneumatic components and increases their service life. Machine failures and downtimes are reduced. Whether compressed air preparation, regulation or cleaning, we have multi-part service units, from pressure regulators, filter controllers, oilers, condensate diverters and oil-water separators to system expansions and various accessories as well.

Compressed air preparation helps to prevent malfunctions on pneumatic components and increases their service life. Machine failures and downtimes are reduced. Whether compressed air preparation, regulation or cleaning, we have multi-part service units, from pressure regulators, filter controllers, oilers, condensate diverters and oil-water separators to system expansions and various accessories as well.

Compressed air preparation helps to prevent malfunctions on pneumatic components and increases their service life. Machine failures and downtimes are reduced. Whether compressed air preparation, regulation or cleaning, we have multi-part service units, from pressure regulators, filter controllers, oilers, condensate diverters and oil-water separators to system expansions and various accessories as well.

Compressed air preparation helps to prevent malfunctions on pneumatic components and increases their service life. Machine failures and downtimes are reduced. Whether compressed air preparation, regulation or cleaning, we have multi-part service units, from pressure regulators, filter controllers, oilers, condensate diverters and oil-water separators to system expansions and various accessories as well.

Compressed air preparation helps to prevent malfunctions on pneumatic components and increases their service life. Machine failures and downtimes are reduced. Whether compressed air preparation, regulation or cleaning, we have multi-part service units, from pressure regulators, filter controllers, oilers, condensate diverters and oil-water separators to system expansions and various accessories as well.

Compressed air preparation helps to prevent malfunctions on pneumatic components and increases their service life. Machine failures and downtimes are reduced. Whether compressed air preparation, regulation or cleaning, we have multi-part service units, from pressure regulators, filter controllers, oilers, condensate diverters and oil-water separators to system expansions and various accessories as well.

Promix supplies key components to optimize the production of light foams such as XPS insulation boards, XPET construction boards, XPE foam films, etc. Thanks to the improved cell structure, the foam density can be further reduced, and the throughput of the plant increased, resulting in significant cost savings in production. Replacement of iso-butane for the sake of the environment Iso-butane and other hydrocarbons are excellent blowing agents for high expansion foam production.However, they are also highly harmful to the environment and highly flammable, which increases the production risk. Promix gas dosing stations in combination with other retrofittable process engineering components enable at least a partial switch to the non-flammable and environmentally neutral gases CO2 and nitrogen. Your optimization potential ,Improved mechanical product properties ,Lower foam density ,Replacement of hydrocarbon blowing agents with CO2 and nitrogen ,Increased line throughput

Monitor the quality in your extrusion line, fiber production, polymer production or food and chemical production continuously in real time with the Promix Visco-P inline viscosity meter. Prevent scrap production and reduce raw material costs through active raw material management. Promix Visco-P is a true online rheometer that helps you monitor your production process and save production costs. Ask for a test unit and see for yourself! Advantages Promix Visco-P inline viscosity measurement ,Continuous monitoring of raw material quality and process conditions in real time ,Raw material cost reduction through active raw material management ,Precise inline viscosity measurement in the melt stream – without bypass ,Suitable for all viscous media ,Additional benefit of melt and temperature homogenization in the Promix melt blender, which also serves as a measuring section ,Can be integrated into any extrusion line ,Test units available

Promix gas dosing stations for physical foaming have been specially designed and developed to meet the needs of foam extrusion. Promix gas metering technology is characterized by high dosing accuracy, reliability and amazingly simple operation. Promix gas dosing stations meet all the requirements of a modern gas metering system for foam extrusion. These include high-precision mass flow control, process visualization by means of trend charts, operator-definable operating limits, data acquisition, and synchronization of the dosing rate with the extruder output. Implementation in the extruder control system via fieldbus system is also possible. •,Mass flow from 1 g/h up to 20'000 g/h •,Dosing pressure up to 680 bar

Microcell foam extrusion systems from Promix are used for a wide variety of applications and for almost all polymers. Thanks to the production of very homogeneous microcellular foam structures, high-quality foam products with very low densities and excellent mechanical properties can be produced. Physical foaming can reduce material consumption and thus costs by an average of 20%. This not only saves money but also has a positive impact on the environment. Promix Foam extrusion systems set standards in the production of microcellular foam products with very homogeneous cell structure and high process consistency. The systems operate with environmentally friendly blowing fluids nitrogen or CO2 and are easy to integrate into existing or new extrusion lines. Depending on the application, density reductions of 5 to over 70 % can be achieved.The technology can be used for packaging films, sheets, foam core and corrugated pipes as wellas profiles, cable sheating, blow molds and blown films.

The Procell nucleation additives developed by Promix are specially adapted to the Microcell foam extrusion of plastic melts. They lead to microcellular foam structures, a key factor for high mechanical strength of the foamed product. Homogeneous, very fine-cell foam structures are the key to high mechanical strength. Promix has developed specific Procell nucleation additives. These are specially adapted to the Promix Microcell foam technology and lead to microcellular foam structures. The additives can be used in foam extrusion and light foam extrusion for many polymers such as PP, PET, PE, PS, ABS, PLA and are suitable for food contact applications. Contact us for a test sample.

Promix specializes in demanding cooling and heat exchanger tasks such as cooling and heating of viscous or decomposition-sensitive media / plastic melts. The Promix P1 heat exchanger is the unique combination of a very efficient static mixer and a powerful cooler. The novel patented technology opens up completely new process engineering possibilities in the cooling and heating of plastic melts and other viscous fluids. The simultaneous mixing and cooling processes in the P1 allow for very efficient cooling and heating without the formation of deposits or the risk of product decomposition. Advantages Promix P1 heat exchanger Very efficient cooling of polymer melts close to the solidification point Precise temperature control and uniform temperature distribution at the outlet Very robust construction Extremely gentle cooling and heating of residence time critical fluids Unique self-cleaning behavior Reliably scalable from laboratory test to production scale Test options

Mixing nozzles and static mixers from Promix ensure excellent melt homogeneity and efficiently prevent color streaks or flow lines. Quality problems in injection molding are often solved by modifying the process parameters. Masterbatch concentration and back pressure must be increased, which makes production costs more expensive. This does not have to be the case! Mixing Nozzles from Promix ensure excellent melt homogeneity. Color streaks or irregularly distributed additives in the component are a thing of the past. The ready-to-connect mixing nozzle is installed on the injection molding machine replacing the standard nozzle. Contact us for a mixing nozzle to test.

Insufficient surface quality, long cooling times, uneven thickness tolerances or other quality problems often limit maximum production output. Promix melt blenders eliminate these limitations sustainably and lead to significant cost savings. Would you like to optimize your extrusion process? Improved melt homogeneity and a more uniform melt temperature create tighter thickness tolerances and better surface quality. And quite often, it can also increase production throughput. Promix offers you highly effective static mixers and melt blenders at low investment costs. They are supplied ready for installation, including heater bands and holes for pressure and temperature sensors. The melt blenders are usually installed downstream of the screen changer & gear pump, and upstream of the die. The very short installation length allows easy retrofitting in existing extrusion lines.

The machine structure with solid base plate is extremely compact and stable. All necessary components are integrated in the machine housing: mechanical axes, pneumatic components, control with drive electronics and mounted 12 "touch display. Depending on the desired version, the F-Décor 305 can produce surface patterns like circular grainings, côtes de Genève, engravings or decorative millings on mechanical watch parts. The machine guarantees high precision and high productivity. The F-Decor 305 is delivered ready for connection with either 1 or 2 working spindles.

The machine is universal for glass bottle and plastic bottle rinsing with air.. It blows inside of bottle with clean air and sucking the dust out of the bottle. Under more than 5 years of manufacturing experience ,the air rinser with development and production with a new generation of bottle washing machine equipment, scientific and reasonable equipment adopts PLC and touch screen control, simple operation, convenient maintenance, stable and reliable performance; The working principle is: when the bottle into the conveyor, the compressed air will be discharged high pressure air to clean the container, when blowing air meanwhile will suction the dust. Main features: 1. Specially design for bottle and jar rinsing with ionized air before filling, it combined ionized air flushing with UV sterilizing. 2.The whole washing machine is a full automatic system, PLC control, 7 inch touch screen operator, Simens, Schneider, Airtac, Omron world famous electric and pneumatic components.

Air couplers, also known as air fittings, are essential components in pneumatic systems used to connect various air tools to an air compressor or air hose. They work by using a simple push-and-pull mechanism that allows for quick and easy connection and disconnection of air hoses and tools. Those who work in the automotive, construction, and manufacturing industries, as well as DIY enthusiasts and any other individual that uses compressed air to any extent, may find air couplers beneficial. They are useful for powering various pneumatic tools, such as impact wrenches, spray guns, and sanders. Air couplers are also handy for inflating tires, powering pneumatic nailers, and staplers, and cleaning dusty or dirty surfaces. Featuring a chrome coating and a large body, Ronix 20PP is such an air coupler that can be used in any situation that needs the transfer of compressed air.

Air couplers are essential components in pneumatic systems that provide a safe and reliable connection between various air tools and hoses. They work by allowing compressed air to flow through different components of the system, enabling the tools to function efficiently. Anyone who uses pneumatic tools regularly, such as mechanics, construction workers, or DIY enthusiasts, will undoubtedly need air couplers to keep their system running. Keeping this importance in mind, we have designed and manufactured the Ronix 20SM air coupler with a chrome-coated body and an operating pressure of 10kgf/cm².

Pneumatic retractable stop Locking by toggle joint action Adjustable stop screw Operating principle of the retractable stop This retractable stop is drived by a doubleacting pneumatic cylinder. It is retracted by a 90 ° rotation of the finger. When it is engaged to stop the moving element, it is mechanically locked by a toggle joint action. The retractable finger supports an impact force of 2250 N or less, it is generally necessary to provide damping at the point of contact (elastic or hydraulic depending on the application). Detection by 2 inductive Ø8 detectors is optional. Using of the retractable pneumatic stop There are 3 common applications for this retractable stop • Create an intermediate position for a manipulator or a linear pneumatic gantry • Create a conveyor stop • Referencing a product on a workstation For an intermediate position of the pneumatic manipulator, a hydraulic shock absorber must be placed opposite the stop screw.

Clevis Joints Din 71752 Materials: Carbon Steel Q235 or same grade free cutting steel Y15, Stainless Steel 304, 316 Finish: whre or yellow zinc plated, nickel plated. Stanard Clevis Joints are CNC machined Larger volume can be cold forged China source of Clevis Joints sales@mxmparts.com WhatsApp: +86 13780014913