Plug inserts - Import export

Sensors are often installed in difficult-read positions. The GIA 0420-M12 plug-in display from the GHM GROUP can be turned in all viewing directions to enable readings of critical measurements directly at the location. Sensor manufacturers, plant builders and operators benefit from a flexible display device that can be installed even more easily with the worldwide standard M12 plug connection.

Wall distributor 5622E with 4 slots and FI/LS protection. The housing is made of stainless steel. The door can be locked with a profile half cylinder lock, even with standard plugs inserted. The surface-mounted wall distributor 5622E is suitable for indoor and outdoor use, protection class IP 44 (electrical units). The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost.

Wall distributor 5606E with 6 slots. The housing of the wall distributor is made entirely of stainless steel. The door can be locked with a profile half cylinder lock and can also be closed with standard plugs inserted. The 5606E on-wall distributor is suitable for indoor and outdoor use, protection class IP 44 (electrical units). The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost.

Round raised access floor box 9912A with a device carrier, frame and removable lid made of solid aluminum, anodized in natural aluminum. The housing is made of sendzimir galvanized sheet steel. The lid can be closed with the plugs inserted. Further equipment variants on request.

Floor socket 9902D made of solid aluminum with 2 slots. The cover is anodized in natural aluminum and closes in a straight or angled shape even when the standard plugs are inserted. By turning the cover by 180°, this version is also suitable for cleaning with wet sweepers. Further equipment variants on request.

Round floor socket 9902B made of aluminum with 2 slots. The rimless lid can be covered with floor coverings and closes in straight or angled form even when standard plugs are inserted. Possible height adjustment (20 mm) via integrable leveling feet. Further equipment variants on request.

Floor socket 9902A made of solid aluminum with 2 slots. The reversible cover is anodized in natural aluminum or can be covered with carpet, linoleum etc. and closes in a straight or angled shape even when the standard plug is inserted. Further equipment variants on request.

Floor socket 9901A made of solid aluminum with one slot. The reversible lid is anodized in natural aluminum or can be covered with carpet, linoleum, etc., closes in a straight or angled shape even when the standard plug is inserted. Further equipment variants on request.

Floor socket 8804T made of aluminum with lid for laying on. The lid also closes when the standard plugs are inserted in straight or angled form. Ideal for carpets! The lid is made of 1,5 mm stainless steel. Own coverings can be integrated in the lid. Further equipment variants on request.

Floor socket 8804B made of aluminum with lid for laying on. The lid closes even when the standard plugs are inserted in straight or angled form. The rimless lid can be covered with your own coverings! Further equipment variants on request.

Floor socket 8802T made of aluminum with lid for laying on. The lid also closes when the standard plugs are inserted in straight or angled form. Ideal for carpets! The housing and the gear tray are made of solid aluminum, the lid of 1,5 mm stainless steel. Own coverings can be integrated in the lid. Further equipment variants on request.

Floor socket 8802B made of aluminum with lid for laying on. The rimless lid can be covered with floor coverings and closes in straight or angled form even when standard plugs are inserted. Further equipment variants on request.

Floor socket 8802A made of solid aluminum with lid to hang on. The lid is anodized in natural aluminum and closes in a straight or angled shape even when the standard plugs are inserted. Other colors and equipment options on request.

Floor socket 3202E consisting of a hinged connection module made of 1,5 mm stainless steel, polished. The hinged lid also closes when the plugs are inserted. The equipment rack can be removed for assembly. Particularly suitable for raised floors, exhibition areas, etc. Further equipment variants on request.

Wall distributor 5620E with 2 CEE slots and a housing made of stainless steel. The door can be locked with a profile half cylinder lock, even with standard plugs inserted. The on-wall distributor 5620E is suitable for indoor and outdoor use, protection class IP 44 (electrical units). The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost

CEE floor box 6400E with one slot. The housing of the CEE floor box is made of stainless steel, the device carrier is made of aluminum. Installation can take place anywhere in the floor, since pipelines are used for the line feed. The lid closes even when the plug is inserted. Further configuration variants on request.

Raised access floor socket 8512B, equipped with 12 slots. The box is made of stainless steel and the device carrier is made of aluminum. The frame (2 mm) and the lid (1.5 mm) are made of stainless steel (1.4301). The lid closes even when the standard plugs are inserted in straight or angled form. Various floor coverings (15 mm high) can be inserted into the removable lid. Further equipment variants on request.

Raised access floor socket 8504B with 4 slots. The housing is made of sendzimir galvanized sheet steel. The Frame and lid made of stainless steel. The lid also closes when standard plugs are inserted in a straight or angled shape. The removable lid can be covered with 15 mm flooring like parquet, cork, carpet, etc. Other equipment variants on request

Raised access floor socket 8502B with two slots. The housing is made of sendzimir galvanized sheet steel. The Frame and lid made of stainless steel. The lid also closes when standard plugs are inserted in a straight or angled shape. The removable lid can be covered with 15 mm flooring like parquet, cork, carpet, etc. Other equipment variants on request.

Raised access floor socket 8501B with one slot. The housing consists of sendzimir galvanized sheet steel. Frame and lid made of stainless steel. The lid also closes when standard plugs are inserted in a straight or angled shape. The removable lid can be covered with 15 mm flooring like parquet, cork, carpet, etc. Other equipment variants on request.

Height-adjustable floor tank 8920B with 20 slots. The housing is made of sendzimir galvanized sheet steel, the frame and lid are made of stainless steel. Floor coverings such as carpet, parquet, laminate etc. with a thickness of 15 mm can be used in the removable hinged lid. The lid closes even when the standard plugs are inserted in straight or angled form. Further equipment variants on request.

Height-adjustable floor tank 8912B with 12 slots. The housing is made of sendzimir galvanized sheet steel, the frame and lid are made of stainless steel. Floor coverings such as carpet, parquet, laminate etc. with a thickness of 15 mm can be used in the removable hinged lid. The lid closes even when the standard plugs are inserted in straight or angled form. Further equipment variants on request.

Height-adjustable floor tank 8908B with 8 slots. The housing is made of sendzimir galvanized sheet steel, the frame and lid are made of stainless steel. Floor coverings such as carpet, parquet, laminate etc. with a thickness of 15 mm can be used in the removable hinged lid. The lid, with two versions of cable outlets, closes even when the standard plugs are inserted in straight or angled form. Further equipment variants on request.

Height-adjustable floor box 8904B with 4 slots. The housing, frame and lid are made of stainless steel. Floor coverings such as carpet, parquet, laminate etc. with a thickness of 15 mm can be used in the removable hinged lid. The lid, with two versions of cable outlets, closes even when the standard plugs are inserted in straight or angled form. Further equipment variants on request.

Height-adjustable floor box 8902B with 2 slots. The housing, frame and lid are made of stainless steel. Floor coverings such as carpet, parquet, laminate etc. with a thickness of 15 mm can be used in the removable hinged lid. The lid, with two versions of cable outlets, closes even when the standard plugs are inserted in straight or angled form. Further equipment variants on request.

Floor box 8810B made of polished stainless steel for 10 units. It can be installed at any point in the floor, as pipes are used for the line feed. Because of its low height, this version is particularly suitable for floors in old buildings. The rimless lid also closes when the plugs are inserted and is designed for sticking on floor coverings. Further equipment variants on request.

Floor box 8808T with 8 slots made of polished stainless steel. It can be installed at any point in the floor, as pipes are used for the line feed. Because of its low height, this version is particularly suitable for floors in old buildings. The lid is designed for the inlay of carpets, cork floors or the like, with a covering thickness of 5–7 mm, and closes even when the plugs are inserted. Further equipment variants on request.

Floor box 8808E made of stainless steel. Inside there are two aluminum equipment supports for 4 units each. It can be installed at any point in the floor, as pipes are used for the line feed. Because of its low height, this version is particularly suitable for floors in old buildings. The stainless steel lid, surface polished, closes even when the plugs are inserted. Further equipment variants on request.

Floor box 8808B made of stainless steel. Inside there are two aluminum equipment racks for 4 units each. It can be installed at any point in the floor, as pipes are used for the line feed. Because of its low height, this version is particularly suitable for floors in old buildings. The rimless lid also closes when the plugs are inserted and is designed for sticking on floor coverings. Further equipment variants on request.