Platforms for stands - Import export

Our Premier is the foundation for the perfect guest experience – literally. Because although it’s a great double-decker structure on its own accord, it has one standout feature that makes it a true space winner: its modular platform than can host a wide variety of other Losberger De Boer structures, allowing several unique combinations. Losberger De Boer has a wide range of structures that are designed with events in mind, all with their own, often unique features. The Premier’s modular platform can be built as a stand-alone viewing platform but can also house several other structures. Combine the Premier with a Pyramid, Acropolis, or Chalet top to create an awe-inspiring and highly noticeable double-decker structure. Or how about a fully transparent Alu Vista or Panorama Dome on top?

CHARACTERISTICS: Standing platform with anti-splay PVC protection Strong and resistant Practical and easy to handle Extremely light weight Wide slip-resistant steps Available on the version of 2 steps TECHNICAL SPECIFICATIONS: Lateral Profile Front 50x20mm / Back 33x20mm Superior standing platform with 38x26mm Slip-resistant step with 80mm WARRANTY: 2 Years USE: DIY

The optimal helper when anchoring is not possible - the GEDA 1500 Z/ZP F! As a free-standing transport platform, it can become essential on a wide variety of construction sites. Whether architectural conditions, glass facades or simply current construction site conditions, the GEDA 1500 Z/ZP F is perfect as a free-standing construction hoist. Maximum flexibility and quick readiness for use are the special features of this hoist. Thanks to the GEDA UNI-X-MAST system, it can be operated free-standing up to a lifting height of 12 m and therefore without time-consuming anchorings. With a load capacity of 1300 kg, persons and material can be safely transported up and down. With two lifting speeds of 24 m/min in material mode and 12 m/min in personnel mode, rapid construction progress is guaranteed.

The permanent installed material hoist GEDA 1200 ZM P offers a simple and good-value transport system for materials with a spacious, open top load platform. The GEDA VARIO-MAST-system stands for easy assembly directly from the load platform up to a height of 100 m. Without using a crane, you can put on the handy 1.5 m mast segments and secure them with captive screws and locking nuts. The hoist can be installed at buildings and machinery in the private sector and used by a limited, trained group of users. With a load capacity up to 1500 kg and a lifting height of 9 m/min, the GEDA 1200 ZM P has already proved itself as a helpful machine in warehouses of the tire and automobile industries.

The specified indivdual work steps, coupled with the best technical equipment, give the customer the assurance for a high quality product made in Germany. Through its unique selling pro position in term of the accoustic sound and fire protection properties, the system stands out clearly from the rest of the market and offers unpreceden ted opportunities. Modular system for substantially shorter installation times. Unique sheetpanelled acces floor system for intensive installation areas for example stages, lecture halls or congress centers. Prefabricated vents in the plasterboard covering for the integration of heating and cooling systems has the advantage of shorter installation times on site, as well as reduced overall assembly height. A uniform air distribution is ensured by source air outlets or perforated louvres. Drilling and milling for the subsequent assembly of chairs, lighting and ventilation outlets are already prefabricated.

Glass Frame Transporters from 5.0 to 33.0 t As a third solution for indoor transport of A- and L-stillages with feet HUBTEX offers the series GTT with a load capacity of up to 33 t. Stillage pick-up is carried out by driving under the stillage and lifting of the platform. This industrial truck stands out due to its compact design and its extremely good manoeuvrability with an extremely small turning radius. Model GTT 330/E, load bearing capacity 33 t for indoor transport of stillages with split belt sizes (DLF).

Glass Frame Transporters from 5.0 to 33.0 t As a third solution for indoor transport of A- and L-stillages with feet HUBTEX offers the series GTT with a load capacity of up to 33 t. Stillage pick-up is carried out by driving under the stillage and lifting of the platform. This industrial truck stands out due to its compact design and its extremely good manoeuvrability with an extremely small turning radius. Model GTT 50/GTT 60, load bearing capacity 5 t/6 t with articulated frame for compensation of uneven ground.

Glass Frame Transporters from 5.0 to 33.0 t As a third solution for indoor transport of A- and L-stillages with feet HUBTEX offers the series GTT with a load capacity of up to 33 t. Stillage pick-up is carried out by driving under the stillage and lifting of the platform. This industrial truck stands out due to its compact design and its extremely good manoeuvrability with an extremely small turning radius. Model GTT 150 load bearing capacity 15 t for indoor transport of stillages with split belt sizes (DLF).

Glass Frame Transporters from 5.0 to 33.0 t As a third solution for indoor transport of A- and L-stillages with feet HUBTEX offers the series GTT with a load capacity of up to 33 t. Stillage pick-up is carried out by driving under the stillage and lifting of the platform. This industrial truck stands out due to its compact design and its extremely good manoeuvrability with an extremely small turning radius. Model GTT 180, load bearing capacity 18 t for indoor transport of stillages with split belt sizes (DLF).

Glass Frame Transporters from 5.0 to 33.0 t As a third solution for indoor transport of A- and L-stillages with feet HUBTEX offers the series GTT with a load capacity of up to 33 t. Stillage pick-up is carried out by driving under the stillage and lifting of the platform. This industrial truck stands out due to its compact design and its extremely good manoeuvrability with an extremely small turning radius. Model GTT 320/E load bearing capacity 32 t to load and unload an autoclave.

Glass Frame Transporters from 5.0 to 33.0 t As a third solution for indoor transport of A- and L-stillages with feet HUBTEX offers the series GTT with a load capacity of up to 33 t. Stillage pick-up is carried out by driving under the stillage and lifting of the platform. This industrial truck stands out due to its compact design and its extremely good manoeuvrability with an extremely small turning radius. Model GTT 330/E, load bearing capacity 33 t with articulated frame for indoor transport of stillages with jumbo glass (PLF).

The transmitter converts the tilt angle into a direct current signal, proportional to the angle. Tilt angle values of a platform stand for important measuring data as a part of the safety and control system of that type of machinery. • Robust magnetoresistive angular position transmitter with interface SSI, contact free, freely rotatable without stops • With oil-damped pendulum system • The sensor is contact free and has minimal abrasion on the pendulum • Measuring range, sense of rotation, zero position and measuring span programmed directly at the transmitter

The transmitter converts the tilt angle into a direct current signal, proportional to the angle. Tilt angle values of a platform stand for important measuring data as a part of the safety and control system of that type of machinery. • Robust magnetoresistive CANopen angular position transmitter, conctact free, freely rotatable without stops • With oil-damped pendulum system • The sensor is contact free and has minimal abrasion on the pendulum • Pendulum shaft has no mechanical stops and can be 360° infinitely rotated • Reduced wiring expenditure • Autoconfiguration of the network • Comportable access of all instrument parameters • Instrument synchronisation, simultaneous data read-in and read-out

The transmitter converts the tilt angle into a direct current signal, proportional to the angle. Tilt angle values of a platform stand for important measuring data as a part of the safety and control system of that type of machinery. • Robust magnetoresistive angular position transmitter, conctact free, freely rotatable without stops • With oil-damped pendulum system • The sensor is contact free and has minimal abrasion on the pendulum • Measuring range, sense of rotation and zero position programmed directly at the transmitter

Riga Force Product Birch plywood (Riga Ply) overlaid with a black glass fiber on one face. The reverse face usually is smooth (F).The wear face has a special surface pattern (WT). Applications Flight cases, steps of stairs, floor covering, loading platforms, exhibition stands, vehicle floors, children playgrounds. In general - surface where high wear-impact resistance and pleasant visual appearance are required. Advantages Decorative surface with high wear resistance, weather- and water-proof, resists commonly used chemicals and is easy-to-clean. Durable and easily workable . In addition, the product is environmentally friendly and hygienic. Further processing Plywood can be machined with wood working tools: cutting, drilling, milling, jointing in length, tongue and groove (T&G), half laps, profiled edges etc. Sizes 1220 mm x 2440 / 3050mm 1250 mm x 2500 / 2750 / 3000mm 1500 mm x 2500 / 3000mm 1525 mm x 2750 / 3050mm 3100mm upon special request Cut-to-size panels and machined panels available in accordance with the customers' requirements. Thickness 9, 12, 15, 18, 21, 24, 27, 30, 35

Riga Superwire Product Birch plywood (Riga Ply) overlaid with a phenol (dark brown; black) or UV resistant (Dark grey; Light grey) film on both faces. The wear face has a special surface pattern (WT). The reverse face usually is smooth (F). Applications In transport industry: floor of trailers, vans, buses, containers; children playgrounds; loading platforms; exhibition stands. In general - surface where high wear resistance and pleasant visual appearance are required. Advantages Decorative surface with high wear resistance, weather- and water-proof, resists commonly used chemicals and is easy-to-clean. Durable and easily workable . In addition, the product is environmentally friendly and hygienic. Further processing Plywood can be machined with wood working tools: cutting, drilling, milling, jointing in length, tongue and groove (T&G), half laps, profiled edges etc. Sizes 1220 mm x 2440 / 3050mm 1250 mm x 2500 / 2750 / 3050mm 1500 mm x 2500 / 3000mm 1525 mm x 2750 / 3050mm 3150mm upon special request Cut-to-size panels and machined panels available in accordance with the customers' requirements. Thickness 6.5, 9, 12, 15, 18, 21, 24, 27, 30, 35

Riga Deck Product Birch plywood (Riga Ply) overlaid with a black glass fiber on one face. The reverse face usually is smooth (F).The wear face has a special surface pattern (WT). Application Flight cases, steps of stairs, floor covering, loading platforms, exhibition stands, vehicle floors, children playgrounds. In general - surface where high wear-impact resistance and pleasant visual appearance are required. Advantages Decorative surface with high wear resistance, weather- and water-proof, resists commonly used chemicals and easy-to-clean. Durable and easily workable . In addition, the product is environmentally friendly and hygienic. Further processing Plywood can be machined with wood working tools: cutting, drilling, milling, jointing in length, tongue and groove (T&G), half laps, profiled edges etc. Sizes 1220 mm x 2440 / 3050mm Cut-to-size panels and machined panels available in accordance with the customers' requirements. Thickness 9, 12, 15, 18, 21, 24, 27, 30, 35