Plate flange - Import export

Standards :EN 1092-1, DIN 2576, ANSI B16.5, BS 4504, JIS B2220 Dimension : DN15-DN2000, 1/2"-24" Pressure : PN2.5-PN100, 150Lbs-900Lbs Material :Carbon Steel, Alloy, Stainless Steel, Duplex & Super Duplex and others…

We are able of producing a wide range of stainless steel flanges, including raised face socket weld, raised face threaded, raised face slip-on, stainless steel blind plate, stainless raised face blind, stainless lap joint, and stainless steel slide on plate. Stainless steel flanges with dimensions ranging from Ø 30 mm to Ø 740 mm are manufactured in accordance with your technical drawing requirements.

We are able of producing a wide range of stainless steel flanges, including raised face socket weld, raised face threaded, raised face slip-on, stainless steel blind plate, stainless raised face blind, stainless lap joint, and stainless steel slide on plate. Stainless steel flanges with dimensions ranging from Ø 30 mm to Ø 740 mm are manufactured in accordance with your technical drawing requirements.

EN 1092 plate flange for welding type 01, reduced thickness grade 1.4301 54 PN10 Form

EN 1092 plate flange for welding type 01, reduced thickness grade 1.4301 54 B11 PN16 Form A

EN 1092 plate flange for welding type 01, reduced thickness grade 1.4301 42 PN10 Form

EN 1092 plate flange for welding type 01, reduced thickness grade 1.4301 42 B11 PN40 Form A

EN 1092 loose plate flange type 02, grade 1.4301 76,1 PN16 Form A

EN 1092 loose plate flange type 02 1.4301 70 PN16 Form

EN 1092 loose plate flange type 02 1.4301 54 PN16 Form

Potentiometric position transducer in compact design with one-sided actuating rod; long life span and high adjustement speed; Flexible mounting via clamps, bushing mounts or flange plates

Material, version: 1. Sealing cap red Polyamide 66 thermoplastic. 2. Filler sieve black Polypropylene thermoplastic. 3 Flange electro zinc-plated steel. 4. Fastening screws electro zinc-plated steel. 5 Flange seal cork. 6. Chain brass.

Potentiometric position transducer in compact design with one-sided actuating rod and return spring; long life span and high adjustement speed; Flexible mounting via clamps, bushing mount or flange plates; probe tip with pressed-in hardened metal ball

Body and flange plate EN AW5754. Guide shafts steel Version Body, hardcoated Flange plates, anodised. Guide shaft, hardened. Note Maintenancefree pneumatic linear modules with two precision steel shafts and ball guide bushing with wipers. Double acting cylinder drive. All fastening threads have threaded inserts. The as accessory available shock absorbers and proximity switches can be integrated (no protruding edges). Positive fit construction for hundred per cent reproducibility. Combinations in all sizes and stroke variants are feasible without adapter plates. Repeat accuracies of ±0.01 mm are possible. Specified loads apply by centred carriages. On request Available with locking cartridge as stroke deviation safeguard. Accessory See table for shock absorber, proximitiy switch and plug connector.

Flange plate, piston and body rust-resistant, bright. Screws electro zinc-plated. Collet red or clear anodised. Note: Machinable collet system with base plate for mounting on 50mm pitch grid plates. The flange plate can be used for external or internal clamping collets. The contour of the workpiece to be clamped is machined into the collet. Free-form and asymmetrical contours can be clamped. The integrated spring package generates a clamping force of 5.8 kN. The clamping force can be raised to 43.5 kN by pneumatic post-clamping. The clamp is released by blowing compressed air onto the lower piston surface pushing the piston upwards and releasing the clamping force on the collet. Clamping travel 0.2 mm. Repeat accuracy < 0.01 mm. Accessory: Collet for external or internal clamping 03179

for liner, build-up and concrete/tile pools, with basket, flange set, skim vac plate d32/38, flange, M5 thread inserts A4 (SS316), screw set, sealing, reductions 2“/1½“ and overflow connection d50. Incl. notch for niveau sensor. Recommended flow rate 8 m3/h.

Complete measuring element with special flanges - Suitable for pipe diameters ≤ 40 mmInstallation of the integrated sharp-edge orifice plate: between special flanges (direct mounting of the manifold and the differential pressure transmitter) Solder (BW) or flanged connection Material: Standard: carbon steel, stainless steel, others according to your application.

The 1''/1'' flowmeter is also called a flowmeter with flange pressure taps. The high pressure upstream measurement is 1 inch from the upstream edge of the plate and, symmetrically, the low pressure measurement is 1 inch from the downstream edge of the plate. This is often a pre-assembled complete set with orifice plate mounted between orifice flanges. Orifice flanges are standardized and manufactured to ASME B16.36. The orifice plate is manufactured in accordance with ISO 5167 or ASME MFC-3M.

the desired orifice (orifice plate, nozzle) the flanges to fix the orifice the pressure taps (at the flange or in the corners, depending on the primary element chosen) and the impulse tubes integrated or remote 3 or 5 way manifold the preset differential pressure transmitter the built-in temperature sensor (for temperature compensation) in option MOUNTING AND ASSEMBLY DATA: Optimized centering of the measuring element Honing of upstream and downstream pipes to meet roughness criteria Temperature and pressure compensation for gases to achieve very accurate flow measurement Remote mounting of the instrumentation according to the applications CHARACTERISTICS : For orifice plates: see corresponding technical data sheet For nozzles: see corresponding technical data sheet Straight lengths upstream, downstream, roughness and circularity of the tubes, centering measuring element: see details on the FAQ tab on this page ACCESSORIES : Temperature sensor: Sensor mounted on downstream

Description: Nut to be used in conjunction with a hammer head screw Measures: M6 / M8 Material: Zinc plated steel / stainless steel

FX-C lifting magnets have a round, multipole clamping surface, designed for lifting rings, sleeves, bearing housings, flange plates and similar workpieces.The load specification is valid for full-surface mounting on workpieces which cover D inside to D outside (see table Dimensions), for workpieces with a smaller mounting surface an approximate maximum workpiece weight of 3.5 kg per cm² clamping surface can be calculated. For serial workpieces, a documented test should confirm the safety factor 3.

SAE Blanking Flange and Counterflange BFX-CP / BAS-CP ▪ 3000 PSI Standard Pressure Series (based on ISO 6162-1:2006): 1/2" (DN13) ... 5" (DN127) ▪ 6000 PSI High Pressure Series (based on ISO 6162-2:2006): 1/2" (DN13) ... 2" (DN51) ▪ Material: S355J0 / C45 or equivalent, Stainless Steel 1.4404 on request (W5) ▪ Surface: blank, oiled SAE Sandwich Plate - Female BSP Port SPL-G1/4-L ▪ e.g. for Test Couplings ▪ 3000 PSI Standard Pressure Series (based on ISO 6162-1:2006): 1/2" (DN13) ... 2" (DN51) ▪ 6000 PSI High Pressure Series (based on ISO 6162-2:2006): 1/2" (DN13) ... 2" (DN51) ▪ Materials: S355J0 / C45 or equivalent, Stainless Steel 1.4404 on request (W5) ▪ Surfaces: blank, oiled SAE Blindplug CAG-BP SAE Blindplug (High Version) CAG-BPH ▪ 3000 PSI Standard Pressure Series (acc. to ISO 6162-1:2006): 1/2" (DN13) ... 4" (DN102) ▪ 6000 PSI High Pressure Series (acc. to ISO 6162-2:2006): 1/2" (DN19) ... 2-1/2" (DN64) ▪ Materials: S355J0 / C45 or equivalent, Stainless Steel 1.4571...

Designed to be used as filler ports for hydraulic reservoirs, allowing the reservoir to breathe whilst protecting it from contamination found in harsh environments; ideal for applications in which space is limited Features ▪ Cap diameter of Ø70 mm / Ø2.76 in ▪ Screw-in version, equipped with male BSP thread (ISO 228) or male NPT thread (ANSI B1.20.1) ▪ Bayonet version with a six-hole bolt pattern for flange interfaces similar to DIN 24557, part 2 Materials ▪ Body and cap made of glass-fibre reinforced Polyamide (PA) ▪ Socket made of Steel, zinc-plated ▪ Bayonet flange made of Steel, zinc-plated ▪ Basket made of Steel, zinc-plated or Polyamide (PA) ▪ Sealings made of NBR (Buna-N®) Consult STAUFF for alternative materials. Technical Data ▪ Operating temperature range: -40 °C ... +120 °C / -40 °F ... +248 °F ▪ Mounting set including bayonet flange, steel or plastic basket (800 μm), gaskets and bolts ▪ Metal basket ▪ Plastic basket ▪ Pressurisation up to 0,7 bar / 10 PSI ▪ Air...

For welding with tube 40 x 40 mm For screwing on Rustproof due to stainless steel AISI 304

ProArc Drill+ Gantry type auto drill machine is an automatic, efficient and high performance CNC drilling machine. Drilling width from 1,700mm~7,200mm Drilling length depends on request. It constituted by: 1. IPC based CNC controller 2. Servo Z-axis lifter 2. Servo drill spindle 3. Auto tool length detector

Housing: powder-coated aluminium, aviation yellow or white Disperser: hardened glass Disperser flange: nickel-plated ring Fasteners: stainless steel Light fixtures are UV protected Electrical Characteristics Power supply 48V DC from controller – dimmable: 100% ,30%, 10% Power consumption AL-120-05-GR – 10W AL-121-04-GR – 8W AL-122-03-GR – 6W AL-123-06-GR – 12W AL-124-03-YE – 6W

Housing powder-coated aluminium, RAL 1004 (aviation yellow) Diffuser – hardened glass Diffuser – flange nickel-plated ring Nickel-plated brass cable gland Stainless steel fasteners Light fixtures are provided with anti condensation valve and are UV protected Electrical Characteristics Power consumption: 9W Power supply: 48V DC from controller – dimmable: 100%, 30%, 10% or 90-230V, 50/60Hz – non dimmable

Housing powder-coated aluminium, RAL 1004 (aviation yellow) Diffuser – hardened glass Diffuser – flange nickel-plated ring Nickel-plated brass cable gland Stainless steel fasteners Light fixtures are provided with anti condensation valve and are UV protected Electrical Characteristics Power consumption: 9W Power supply: 48V DC from controller – dimmable: 100%, 30%, 10% or 90-230V, 50/60Hz – non dimmable

Housing powder-coated aluminium, RAL 1004 (aviation yellow) Diffuser – hardened glass Diffuser – flange nickel-plated ring Nickel-plated brass cable gland Stainless steel fasteners Light fixtures are provided with anti condensation valve and are UV protected Electrical Characteristics Power consumption: 6W Power supply: 48V DC from controller – dimmable: 100%, 30%, 10% or 90-230V, 50/60Hz – non dimmable