Plate filters - Import export

Special FTJ filter fleeces are particularly suitable as precoat or support fleece on horizontal plate pressure filters or plate filters The following precoat agents are used: Diatomaceous earth Bleaching earth Cellulose Cornmeal The FTJ nonwovens Cora®Dot and Cora®Spun effect corresponding savings on precoat agents with extremely fine filtration.

Recover filtrates and particulate retentates thoroughly and quickly Used for high recovery of filtrates and particulate retentates, POREX® deep well filter media are designed for high-throughput sample processing. Our POREX deep well filter plate media features: High sample recovery for many processing techniques including filtration, vacuum filtration, centrifugation or other positive pressure techniques Minimal contamination–Porous material structure prevents cross talk between adjacent well walls. Proprietary surface modification – Materials allow multiple functionalities or sorbent addition, including CPG, carbon C18 or C8, and media is suitable for vacuum filtration, centrifugation or other positive pressure techniques. Tested by independent laboratories - Certified pure materials ensure performance, accuracy and reproducibility. Features Certified Pure Porex™ Materials Filter Media Purity – no material additives or contaminants No Heavy Metal Interference No other...

The filter presses from AQUACHEM of the EC Beverage series are used in the beverage industry, for example, for the filtration of selected wines. Another feature is that the filter elements are gasketed, and therefore the must or juice does not also come into contact with the ambient air. The EC Beverage series is offered as standard in the filter plate sizes 470, 630 and 800 mm.

Easy-to-use, mobile carpet probe with surface plate, bag filter, hose and plug-in coupling for surveying pipelines, and for recording gas traces after checking the gas pipeline network with the suction process. Very light, therefore fatigue-free and easy to use in daily tasks. The wide edge of the flexible carpet probe conforms well to unevenness on the pavement surface and largely prevents the ingress of interfering gases (exhaust gases) during the inspection process.

Advantages Parallel alignment of multiple Sieve Cylinders enables a large filtration area on limited space Higher filtration degree possible through bag inserts Area of application Applicable as pipeline and process filter Flow rate Various filter sizes and the modular design enable any required flow rate. classification number S26 Filter aid - Filtration degree 0,5 µm - 20 mm Medium low viscosity liquids, gases Filter material perforated plate cylinder, mesh, bags

Advantages Parallel alignment of multiple Sieve Baskets enables a large filtration area Area of application For the filtration of all types of liquids; protection filter for pumps and volumeters, pipeline filter, etc. Flow rate Various filter sizes and the modular design enable any required flow rate. classification number S22 Filter aid - Filtration degree 50 µm - 20 mm Medium oil, emulsions, solvents Filter material perforated plate cylinder, mesh

Advantages Parallel alignment of multiple Sieve Baskets enables a large filtration area Area of application For the filtration of all types of liquids; protection filter for pumps and volumeters, pipeline filter, etc. Flow rate Various filter sizes and the modular design enable any required flow rate. classification number S21 Filter aid - Filtration degree 50 µm - 20 mm Medium oil, water and solvents Filter material Perforated Plate Cylinder, Mesh

Advantages Inline alignment of Sieve Baskets; all pressure rates and materials are possible; applicable for processes with high differential pressure; heated version available Area of application For the filtration of all types of liquids; protection filter for pumps and volumeters, pipeline filter; etc. Flow rate Various filter sizes and the modular design enable any required flow rate. classification number S11 Filter aid - Filtration degree 50 µm - 20 mm Medium oil, water and solvents Filter material perforated plate cylinder, mesh

Advantages Simple, compact design Area of application For the filtration of all types of liquids; protection filter for pumps and volumeters, pipeline filter, etc. Flow rate Various filter sizes and the modular design enable any required flow rate. classification number S7 Filter aid - Filtration degree 10 µm - 5 mm Medium oil, water Filter material perforated plate cylinder

Advantages Simple, compact design Area of application Various filter sizes and the modular design enable any required flow rate. Flow rate Various filter sizes and the modular design enable any required flow rate. classification number S9 Filter aid - Filtration degree 10 µm - 5 mm Medium Oil, water Filter material Perforated Plate Cylinder

Advantages Certified Gas Separator; maintenance-free operation; for the separation of rough particles Area of application For the use at refuelling points of aviation fuel, gasoline and hydrocarbon Flow rate Various filter sizes and the modular design enable any required flow rate. classification number P55 Filter aid - Filtration degree - Medium Nitrogene, gases Filter material Perforated Plate Cylinder Mesh

Plate Precoat Filter are used for the fine filtration of low-viscosity oils. This cost-effective filter is a compact device designed to supply individual machines. The achievable filtration fineness is between 1 and 5 µm in NAS 3-7. The filter regeneration and cleaning of the filter discs are done manually. Advantages: Small footprint Excellent filtration results Low installation effort The filter geometry can be customized to match the machining machine (on request) Affordable price Operating Principle: Swelling: The entire tank is filled with oil. Before filtration can begin, the filter discs (1) need to be swollen with a filter aid (diatomaceous earth, cellulose, perlite). Filtration: After the precoat, the operator manually switches to filtration and directs the filtrate into the clean tank (2). The system pump can now be switched on to supply the processing machine. The achievable filtration fineness is 1 – 5 µm, depending on the filter aid used.

If you want to explore MIG welding, Lincoln Electric's Handy MIG® machine is your ideal solution. Designed for flexibility and simplicity, this MIG welding machine is notable for its portability and ease of use, connecting to a 230V, 20 amp power source. Equipped with four voltage settings and a system for continuously adjusting the wire feed speed, the Handy MIG® is capable of welding mild steel from thin thicknesses up to 3.2 mm. The equipment is supplied almost ready to use, including almost all the accessories necessary to start MIG welding: a torch with mounted cable, an earth cable with clamp, a gas nozzle, a gas regulator with hose, a wire coil solid, contact tips, and a protective mask with filter plate and lens. You just need to add a shielding gas cylinder. Additionally, it includes a coil of self-shielded flux-cored wire, additional contact tips and a hammer with cleaning brush, expanding the functionality of the Handy MIG® for welding with and without gas.

The CP120B & CP160B generators can be equipped with either a filter or lead cap. These can be used to filter out low energy beams and in doing so improve the image quality. For instance, the lead cap is used to block the X-Ray beam during the pre-heating of the CP160B. Both the filter and lead cap are combined with a specific holder to fix the accessories on the CPB generators. Thanks to its easy fixation system, mounting and dismounting of the filter plate and lead cap is possible.

Spray walls and spray booths with dry separation via pre-filters and fine filters. Spray walls and spray booths with dry separation For lower utilisation times or overspray quantities, spraying systems with dry separation offer a meaningful alternative to water-sprinkled systems. The Rippert modular spraying system type RTS enables individual adaptation to the respective case of need. Function The overspray is caught by the exhaust air stream and fed to the filter. The solids are filtered out here, while the cleaned exhaust air is blown out into the open air by the fan. Versions The entire spray wall and the drip tray are made of galvanised sheet steel. The basic version consists of a wall with a two-fold filter stage. The attached radial fan is equipped with spark protection in the suction nozzle as well as an explosion-proof motor. The first filter stage is formed by a paper filter or a baffle plate filter, consisting of two rows of galvanised sheet metal lamellae arranged one behind the other. A glass fibre fine filter arranged directly behind it represents the second filter stage. The spray wall can additionally be equipped with removable or fixed side and ceiling panels. Each version is also available with floor suction pan, available with an integrated 2-stage filter and grating cover. Accessories In addition, the spray wall can be equipped with various accessories from the Rippert product range, such as explosion-proof lights, energy-saving flaps, turntables, etc. We recommend the installation of a supply air system for the replacement of the exhausted air. Cleaning / maintenance The spray wall is designed such that the filter elements can be exchanged with little effort in a very short time. For faster cleaning, baffle plate filters should by sprayed with a release agent (e.g. strippable varnish) before being put into operation. Underfloor paint mist extraction With dry separation, consisting of a support structure with attached paper filter, grating cover and a suction duct with air quantity adjustment.

With high-quality filter tubes and PTFE diaphragms. Paint dust filters Wet painting also results in overspray. Overspray is the solid portion of the paint that is not taken up by the workpiece. According to the purpose of use, the overspray is moist and sticky immediately after release. It is captured by the exhaust air stream in the spray booth and fed to a filter. This can be, for example, a baffle plate filter, paper filter, fleece filter, glass fibre filter or also combinations of these. The adhesive effect causes the paint particles to adhere to the contact surfaces of the respective filter medium, as a result of which a good degree of separation is achieved. However, all these filters are storage filters, i.e. the filters clog up more and more during operation and cannot be regenerated. A filter exchange becomes necessary if the exhaust air rate of the spray booth falls below the minimum. This can be very time-consuming under certain circumstances and the work process must be interrupted in order to do it. To make things worse, not only must the filtered and bound paint residues be disposed of, but also the actual filter materials. Such tooling times are not justifiable for automatic, continuous or multi-layer painting processes. Continuous procedures such as automatically cleaned filters are likewise required for this. The humidity and the adhesiveness of the particles to be filtered are thereby the problem. In order to solve this problem, the paint particles should be relieved of their adhesive capability as far as possible whilst still inside the paint booth. Our patented ‘RTS-Rotation’ system is outstandingly well suited for this. The system is comprised of slowly rotating brush rollers, which take up the adhesive paint particles on the surface of the bristles and allow them to dry there. The bristles are automatically regenerated at pre-specified time intervals by combing devices that swing in at the rear of the brush rollers. The dislodged paint residues can then be removed and disposed of either manually during work breaks or automatically during operation. The degree of separation of this system is, however, insufficient to satisfy the environmental protection requirements concerning residual dust content in the exhaust air. A further filter stage is necessary for that. It must be assumed that the paint particles arriving here are to a certain extent still damp and sticky. For this we use special paint dust filters with high-quality filter tubes with PTFE diaphragms. If necessary, precoating agents (auxiliary dust) are used in order to neutralise the adhesive capability of the particles and to keep the dust layer on the filter elements permeable to air. The precoating agent is injected into the raw air pipe by means of special dosing units. The filter tubes are cleaned by means of compressed air impulse cleaning. The use of this technology requires special know-how. We have had the appropriate experience for almost ten years. The implemented plants have capacities ranging from 5,000 to 90,000 m³ /h. Because of the large number of different paint systems, individual experiments are usually necessary in our pilot plant in order to find the correct solution for the individual case.

Designed as in-tank suction strainer elements for direct installation into suction lines of pumps; should always be installed below the minimum fluid level of the reservoir Features ▪ Available with female BSP thread (ISO 228) or female NPT thread (ANSI B1.20.1) Materials ▪ Threaded end cap made of glass-fibre reinforced Polyamide (PA) or Aluminium ▪ Lower end cap and support tube made of Steel, zinc-plated ▪ Standard filter material is Stainless Steel Mesh (125 μm); alternative micron ratings of 60 μm and 250 μm on request Consult STAUFF for alternative materials. Media Compatibility ▪ Suitable for use with Mineral and Petroleum based hydraulic fluids (HL and HLP) Technical Data ▪ Operating temperature range: -20 °C ... +100 °C / -4 °F ... +212 °F ▪ Integrated bypass valve with an opening pressure of 0,2 bar (3 PSI) to reduce the risks of high-pressure drops that can be caused by contaminated strainer elements or high-viscosity fluids Special sizes, designs, materials and...

Type: 22/25-Rund Manufacturer: Seitz Description: Plate / Frame filter

Type: Radium RZ 60 B GCW Manufacturer: Seitz Description: Plate / Frame filter

Type: F1/1000/150/200 Manufacturer: Schenk Description: Plate / Frame filter

Type: Zenith Manufacturer: Seitz Description: Plate / Frame filter

Type: A 20 Z Manufacturer: Seitz Description: Plate / Frame filter

Type: 60B/150 Manufacturer: Seitz Description: Plate / Frame filter

Type: 40/15 Manufacturer: Seitz Description: Plate / Frame filter

Type: 40/10 Manufacturer: Seitz Description: Plate / Frame filter

Type: 40 x 40 Manufacturer: Schenk Description: Plate / Frame filter

Type: 40 CD 60 Manufacturer: Seitz Description: Plate / Frame filter

Type: 30 Manufacturer: Seitz Description: Plate / Frame filter

Type: Radium RZ 30 A CCW Manufacturer: Seitz Description: Plate / Frame filter