Plastic screws - Import export

These are the accessories use in printer ,use in internals.

These parts are used in printer accessories.

FEATURES AND BENEFITS Enhancement when compared with Polymate30: • The re-designed geometrical flank allows for the optimized movement of plastic material while initiating the fastening procedure. • Under static and dynamic stress, a considerable increase is ensured in the service life of the joint. • At the same nominal diameter, up to 50% gain in torsional and tensile strength. • As there are a larger core and reduction in the thread pitch length, shorter fasteners and/or smaller diameters may be used. • Improved pitch provides added vibrational safety.

Delivery program: Plastic Screws From M3 x 20 mm to M10 x 60 mm. Plastic Knurled screws DIN 653 from M3. Plastic Transverse-hole screws DIN 404 from M3 x 20 mm. Plastic Nuts From M3 Plastic Threaded pins DIN 551 from M3 Connection elements Other connection elements such as discs, caps, spacers and diverse articles moulded from all commercially available plastics (granulate). All articles are available with the specifications listed next. Materials: Articles moulded from PA, POM and all other plastics (granulate) commonly available on the market. Standards: According to DIN/EN/ISO or drawings. Colour: According to RAL table or individual customer wishes.

PT screws for thermoplastics: Thread rolling screws for direct screwing into plastics, Thread 30° or 60° KTG screws for thermoplastics: Single-start or double-start thread (high, low) Thread rolling screws are extruded for larger batch sizes and turned for small batch sizes (Turned parts for direct screwing) High tensile and highly stressable connection of thermoplastics with considerably longer life endurance Thread rolling without chips and loss of material Minimum radial tension, large thread coverage Process-reliable due to torsion strength Shorter and slimmer screws are possible. Materials: Steel, case-hardened Quenched and tempered steel 1.5523 tempered to 1000 +200 N/mm², high-grade steel 1.4567, other materials on request Length: 3 – 160 mm (at lengths from 60 mm only partial thread lengths 4 x d are possible) Thread diameter: 1.6 – 10 mm Special dimensions on request Batch sizes: Standard ex-stores Special screws from 30,000 pieces

Self-tapping screw for fastening, connecting sheet metal and metal profiles up to 2 mm Head: hemispherical with press washer, Philips No2 slot, M = 4.5-5.1

EF-PLUS 30 screws are just made for perfect assembly for thermoplastic material with special 30 degree thread angle.

This item refers to DIN 1587 but P6.3 material is not guaranteed by norms

Superbright bipolar red, yellow and green LEDs assemblies with resitor for 120VAC or 240VAC. Plastic housing or rugged screw on metal housing-all available with IP66 sealing. Custom wire leads,plug, connectors options available by verco electromechanical components. mounting holes 7,93 mm or 12,70 mm

is a thread-cutting fastener designed to meet the demanding requirements of thermoset plastics with easy assembly coupled with a strong, reliable joint to ensure optimized assembly performance. Provides an asymmetrical 30º thread profile, inclined towards load surface to increase friction (FR) between the application and the fastener Reduction in radial stress Reduction in back-out caused by relaxation Increase in strip resistance Elimination for the need in supplementary locking devices Optimal thread pitch allows for deeper thread engagement Increase in pull-out strength Increase in resistance to vibration loosening Increase in load-carrying capability The recessed thread root allows space for displaced material Minimization in installation torque Miniziation in the risk related to clogging and galling of threads during assembly The shank slot minimizes chip production Through hardened to Rc 33-39

is engineered for direct assembly of thin walled and flat designed thermoplastic components. Direct assembly using the Polymate30 Screw makes thin walled and flat designs possible. This leads to material savings and reduced cycle times during injection moulding. Therefore, the quality of the Polymate30 joint and the fastening component, translates into a considerable cost saving overall.

is a special fastener designed for reliability and an easy direct assembly into thermoplastics. Enhancement when compared with Polymate30: The re-designed geometrical flank allows for optimized movement of plastic material while initiating the fastening procedure. Under static and dynamic stress, a considerable increase is ensured in the service life of the joint. At the same nominal diameter, up to 50% gain in torsional and tensile strength. As there is a larger core and reduction in the thread pitch length, shorter fasterners and/or smaller diameters may be used. Improved pitch provides added vibrational safety. SOMETIMES SMALLER IS BETTER The visuals below show the advantages of a reduced fastener length and diameter by comparing Polymate30 to Polymate20. Substitute A provides a reduction in length, whereas Substitute B provides a reduction in diameter. For both scenarios, the reduction in pitch from the Polymate20 provides a maintainted thread flank.

Universal bottles for storing, packing, taking samples, sampling and transport of liquids.

The reagent bottle is particularly suited for storing, packing, taking samples, sampling and transport of granules and paste-like media.

Metric: Screws from M2 x 10 – M30 x 1000 with thread (up to 100 mm long). Compliant with DIN, EN, ISO, or according to drawings and samples. Plates: From ST 2.9 x 19 – ST 6.3 x 160 / 80 mm with thread (up to 80 mm long). Compliant with DIN, EN, ISO, or according to drawings and samples. KTG screws for plastics: 30-degree thread (OEB Kunst). KTG 3 x 10 mm – KTG 8 x 160 mm with thread (up to 60 mm long). DIN 7500 thread grooving screws: For die casting, zinc or aluminium. M3 x 20 – M10 x 160 mm with thread (up to 50-60 mm long) (OEB Furch). DIN 7513 – DIN 7516 thread cutting screws: For die casting, zinc or aluminium. M3 x 20 – M10 x 160 mm with thread (up to 50-60 mm long) (OEB Schneid). Other thread types: With-Worth, HiLo, UNC/UNF, double-start, triple-start.

The economic adjustment to small batch sizes, we meet with our turned parts for the direct assembly in plastics and die-cast products. Any thread forms such as, thread-tapping (DIN7500), thread cutting (DIN 7513-7516) or KTG for direct screw in plastics are realized cost-effectively. Advantage is the elimination of high tooling costs, since no counter-thread in the workpiece (eg threaded inserts, nuts, etc.) is required because the direct assembly takes place directly into the workpiece. Only a given tube is required in order to screw it directly. Our turned parts replace previously cold formed parts used (so-called multi-station presses) which require high output volumes in order to achieve a reasonable price parts.

Universal bottles for storing, packing, lab, taking samples, sampling and transport of liquids.

Novelis’ fracture-proof, seamless aluminum bottles offer needed protection when transporting and storing sensitive and critical goods. Novelis produces aluminum bottles for a range of applications — from commercial use to United Nations-approved packaging — in several coating configurations and sizes with fill capacities ranging from 38 ml to 6250 ml. These bottles include rolled thread for screw stoppers, tamper-proof seal and screw closure, plastic screw closure and locking ring, plastic threaded ring for pilfer-proof closure and flex-spout closure system.

for rods up to 13 mm Ø*nickel plated brass screw*with plastic handle

The Irus connection systems are especially suitable for connecting glass panels. The glass panel connectors are equipped with plastic screws so that the glass cannot be damaged. The glass panel does not require drilling as the clamping screws can be tightened and thus fix the glass panel. The glass panel connectors can clamp varying panel thicknesses of 3-5mm, 5-8mm, 10-13mm and 13-16mm. The robust structure of the glass panel connectors makes them suitable for using outdoors.

4 or 5-pin socket Straight or angled Connection with screw clamps Plastic housing

Tensioner Vesconite® plastic. Screw and nut steel. Version Screw ISO 4017, grade 8.8, electro zincplated. Nut ISO 4035, grade 8, electro zincplated. Note For tensioning roller chains. The chain tensioner set can be combined with all tensioning elements to form a readytoinstall chain clamp. The symmetrical design enables use on both sides. Large radii ensure very quiet running. The highquality plastic does not require any lubrication. The maximum chain speed should not exceed 1.5 m/s in continuous use.

OKS 1105 prevents the formation of electrically conductive layers and minimises the risk of flashovers and dielectric losses. The insulators and switchgear covered with the paste thus maintain a good insulation resistance. Sealing lubrication for electrical or electronic equipment such as relays, plug-in connections, cable lugs and lamp sockets Protection of insulators and switchgear in humid atmospheres, for example of junction boxes, screw terminals, overload cutouts at high-voltage pylons, connecting cables and terminal connections Lubricant for plastic screw connections and other moving parts of metal, ceramic, plastic Advantages and benefits Excellent water repellent properties Excellent surface wetting Good adhesion on glass, porcelain and plastics Stable consistency across a wide temperature range Very good resistance to chemical and weather-based influences (e.g. ozone, UV radiation) Neutral with regard to many materials

Housing fibreglass reinforced thermoplastic polyamide. Sight glass thermoplastic polyamide. O-ring and flat seal NBR. Reflector PVC. Float plastic. Screw and nut, steel. Version: Housing black. Sight glass crystal clear, high mechanical stability, non-ageing. Reflector white. Float red, with magnetic element. Screw and nut electro zinc-plated. Note: The oil level gauge not only enables the oil level to be viewed but also recorded using a REED switch. In addition, the oil level gauges can also emit an electric signal if the temperature of the liquid inside the container reaches the threshold of 70 °C. As soon as the float element approaches the selected minimum value after the circuit has been closed, the system emits an electric signal. The sensor is located on the housing and its height can be adjusted in line with the control requirements for the oil level. The minimum level is ca. 35 mm from the centre of the lower fastening screw.

Housing polyamide 6. Hollow shaft steel. Screen plastic. Grub screw steel. Version Impactresistant housing. Hollow shaft black oxidised. Grub screw black. Dial black, digits white. Note Position indicators allow direct reading of input measurement values at a glance. In addition, the value indicated per spindle rotation (corresponding spindle pitch) can be selected and the various indicator values are realised by a transmission gear. The position indicators are distinguished by their small construction with very clear display. They are especially suitable for small spindle distances and small shaft diameters and have a torque support that is positioned in a hole on the side. ** At the 1st asterisk give assembly position and at the 2nd asterisk give the count direction (see sample order “assembly position, count direction”). Technical data – Counter consisting of 3 10position dials – Height of figures about 4 mm – Hollow shaft Ø 10 H7 mm

Compact Interchangeable Head Digital Torque Wrench. Tohnichi’s smallest digital torque wrench. The optional Bluetooth® module makes it easy to manage data on a computer or other device. Equipped with a high-luminance LED. Permits confirmation of current tightening condition and pass/fail judgements from a wide range of angles. The high-luminance LED is especially useful in dark working conditions. For tightening and inspection work in low torque ranges, such as cable grounding, and plastic or ceramic screws/bolts. Useful in confined spaces and height-restricted locations where tightening with a torque screwdriver or conventional torque wrench is difficult. For tightening work involving fragile apparatus, such as sensors and semiconductor manufacturing equipment. Applications For tightening and inspection work in low torque ranges, such as cable grounding, and plastic or ceramic screws/bolts. [...]

Our WindSign "Seal" is designed for permanent outdoor use. The folding technique of the frames guarantees a quick change of the posters. A circumferential sealing rubber mounted on the rear walls prevents water from entering. The rear walls are also made of weather-resistant polystyrene. The anti-reflective covers made of UV-stabilised material prevent the posters from fading. The installation of the customer stopper is very easy. The frame is simply screwed to the plastic base and the stand is ready for use. The high stability of the Wind Sign is guaranteed by the fillable base and the special spring technology, so that the stand can also be used in stormy weather. Thanks to the wheels integrated in the base, the WindSign "Seal" can be moved easily to the desired position.

Optisys Petrol and Optisis Diesel are an efficient cleaner and dispersant in one, which reduce and dissolve deposits in injection nozzles. The products support the maximal efficiency of the combustion chamber and reduce exhaust emissions. In addition, they promote engine cleanliness, offer the best protection against wear and give an all-round smooth performance. Optisys Diesel also gets rid of knocking noises. Field of application Every sort of motor vehicle Usage Optisys Petrol and Optisys Diesel are self-mixing. Pour the entire contents into the empty tank, then refuel. Then drive as normal, refilling only when necessary. Batch quantity/Packaging units Batch quantity: 300ml plastic bottles with screw cap Packaging units: 24 bottles per box