Results for
TEPROSA GMBH
Germany
With the help of the 3D-MID process, plastic parts can be metallized not only over the entire surface, but also selectively. To do this, the plastic part is activated with a special laser at the points that are to be coated (this is referred to as laser activation or laser direct structuring). The additives contained in the plastic directly under the plastic surface are “exposed” by the laser treatment. In a chemical bath, copper particles can then be deposited specifically only on the activated surfaces. Other metals, e.g. nickel, tin or gold, can then be deposited onto the starting layer of copper. In this way, a selectively coated plastic part is obtained. MID technology thereby makes it possible to selectively coat two-dimensional and also three-dimensional plastic parts and use them, for example, as circuit carriers for electronic or mechatronic assemblies. With the LPKF-LDS process
Request for a quoteCONEC ELEKTRONISCHE BAUELEMENTE GMBH
Germany
CONEC SnapLock hoods come with a locking system for quick and easy locking. Time-consuming screwing of the hood to the mating connector is no longer required and thus a long lasting connection is made without losable screws. Due to the audible and tangible “click”, even poorly visible device interfaces can be locked quickly and safely. CONEC SnapLock hoods are available in black or metallised plastic material in shell sizes 1-5. The hoods come with one straight cable entry and depending on the number of poles one or two side cable entries. With an upgrade kit, existing interfaces are also compatible with a CONEC SnapLock hood. The CONEC SnapLock system also allows a hood-to-hood connection.
Request for a quoteXIAMEN NINESUN IMP. & EXP. CO., LTD
China
Recycling Aluminum From PET flake Scrap Eddy Current Separator Sorting Plastic and Nonferrous Metal
Request for a quoteHFP BANDSTAHL GMBH & CO KG
Germany
In the field of plastics we offer metal strips with PVC plastisol and/or organosol coatings, as well as polyamide plastics. PP (polypropylene), PE (polyethylene), PC (polycarbonate), PET (polyethylene terephthalate) and PLA (polyactide), TPE (thermoplastic elastomer), TPU (thermoplastic polyurethane) and others. These can be produced with a layer thickness of 5-200 μm Depending on the plastic, higher layer thicknesses can also be achieved. In addition, most plastics can also be equipped with antibacterial properties; of course in all colour variations. Although a one-sided coating more common, we are able to apply the same and/or different plastic adhesives for both sides.
Request for a quoteMING XIAO MANUFACTURING CO., LTD
China
Ming Xiao Mfg has vertical injection molding machines with a weight of 80g-120g, specializing in the production of cable connector joints and metal insert molding. The product features are small size and high vertical concentricity. Compared to horizontal injection molding machines, the vertical insert molding of metal insert products does not bump the surface of metal parts, especially the metal parts whose surface has been rust-proofed. Due to the downward gravity, the vertical injection molding machine is combined. It is easy to scratch the metal surface when the mold is used, and it also hurts the mold. If you have any plastic parts need insert molding metal components, that we are the good choice for you. welcome contact with us for a quote, you will get a satisfied partner.
Request for a quoteTHOMAS CONSTRUCTIONS MECANIQUES - TCM SAS
France
With our comprehensive and modern machine fleet (numerically-controlled machining centres, lathes and milling machines), we oversee the quality processes and manufacturing deadlines for the metal and plastic components of the equipment we design. With this know-how and the immediate availability of our machining equipment, we offer a proactive and flexible service which is invaluable for our customers. We can therefore provide a rapid response to any machining enquiries and adapt to any unexpected changes made during projects. However, our key asset is the proximity of our manufacturing workshop to our Design Office, which facilitates the sharing of skills and the optimisation of components. This high-level of reactivity and flexibility also means that we can quickly respond to requests for replacement parts or repairs in case of unexpected breakdowns.
Request for a quotePOMPES JAPY
France
Rigid spout for metal jerrycans with plastic nozzle / filter
Request for a quoteTECNOCOSMETICA - COSMETIC PRODUCTS MANUFACTURER
Portugal
Tecnocosmética has automatic filling lines for liquids and pastes with a capacity of approximately 10,000 units per day. Tecnocosmética has automatic lines for filling plastic and metal tubes with a capacity of approximately 20,000 units per day.
Request for a quoteUNIQUELAB - DISTILLERY SPIRITS & BIOTECH CHEMICALS
Portugal
Alkaline detergent with high degreasing power developed for cleaning iron, alloy, lacquered, painted rims or plastic/metal trim caps. With a specific formulation to remove dirt such as oil residues, brake dust, tar and mud. Do not use on aluminum rims or components.
Request for a quoteMEVATEC S.R.O.
Czech Rep.
Made of Polyethylene with high density HDPE. For waste separation there are different versions ofids opening for glass/paper 160190/610x60 mm. Standardly delivered with two brakes on two wheels wheel diameter is 200 mm. Can be delivered in version equipped with central brake and children safeguard. In agreement with EN 840 certification. Resistant to UV radiation chemical and biological impacts and frost. Smooth surfaces help against sticking of waste on them. Manufacture materials does not contain any cadmium and can be granulated again. Child safetyock can be ordered.
Request for a quoteXIAMEN NINESUN IMP. & EXP. CO., LTD
China
Vacuum metalizing coater for plastic, glass, ceramic, stainless steel, metal etc. The coating experts of your own company. Full set solution for the coating production. We can help you to enter the pvd coating easily by our vacuum coating machine and full range service. We will provide with most suitable technology according to your requirements. We will make the special coating solution for each customer; combine the full set production technics to meet your requirements, to ensure high efficiency of production. Easy to implement. To many people unfamiliar with the process, pvd coating technology seems complicated. However, with the right investments and a good support, it is easier than expected. We developed a turnkey coating process that makes a pvd coating centre easy to implement. A complete coating process consists of several steps: stripping ; pre-treatment; quality control; cleaning & drying; fixturing&visual inspection; pvd coat ;quality control & thickness measurement etc
Request for a quoteMEVATEC S.R.O.
Czech Rep.
Made of Polyethylene with high density HDPE. For waste separation there are different versions ofids opening for glass/paper 160190/610x60 mm. Standardly delivered with two brakes on two wheels wheel diameter is 200 mm. Can be delivered in version equipped with central brake and children safeguard. In agreement with EN 840 certification. Resistant to UV radiation chemical and biological impacts and frost. Smooth surfaces help against sticking of waste on them. Manufacture materials does not contain any cadmium and can be granulated again. Child safetyock can be ordered.
Request for a quoteMEVATEC S.R.O.
Czech Rep.
Made of Polyethylene with high density HDPE. For waste separation there are different versions ofids opening for glass/paper 160190/610x60 mm. Standardly delivered with two brakes on two wheels wheel diameter is 200 mm. Can be delivered in version equipped with central brake. In agreement with EN 840 certification. Resistant to UV radiation chemical and biological impacts and frost. Smooth surfaces help against sticking of waste on them. Manufacture materials does not contain any cadmium and can be granulated again.
Request for a quoteMEVATEC S.R.O.
Czech Rep.
Made of Polyethylene with high density HDPE. For waste separation there are different versions ofids opening for glass/paper 160190/610x60 mm. Standardly delivered with two brakes on two wheels wheel diameter is 200 mm. Can be delivered in version equipped with central brake. In agreement with EN 840 certification. Resistant to UV radiation chemical and biological impacts and frost. Smooth surfaces help against sticking of waste on them. Manufacture materials does not contain any cadmium and can be granulated again.
Request for a quoteMICRON AMERICA
Turkey
All dies, sold separately. Our portable pneumatic fastener attaching machine is the top choice for the tarp industry as its light weight portability will allow you to take this machine to any job site. It is built on casters so you can work on the floor to install grommets on your heavy duty tarps or banners that are too heavy to lift up. This machine will accommodate installation sizes from # 1.7 to # 3 grommets and can be used with our heavy duty industrial dies for the toughest material installations. The interchangeable dies and the grommets are sold separately. The metal base and the casters are included with the PL 10. At Micron, we Manufacture Quality and Reliability. 60516 (1) High Quality, Easy Portability. The Micron PL 10 high quality portable Grommet Press has a handle on top and is easy to carry around in the shop or to outside job locations.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
FERPLAST SNC
Italy
Clamp for drums to install on the forks of the forklift. The clamp consists of a sturdy steel frame and fork mounted on a forklift. Operation: The connection and disconnection of the drum is automatic and the operator should not fall from the cart, simply push the caliper to the frame, apply light pressure and lift. The clamping device is extremely safe because it is constituted by a double hook, the release is done automatically by placing the drum to the floor. The trolley is suitable for lifting full drums, it is possible lifting the empty drums by pressing it over a pressure to hook the trolley. In the case of empty drums, a second operator must manually apply a pressure on the drum to enable the hooks to be activated.
Request for a quoteHAMBURGER DRAHTSEILEREI A. STEPPUHN GMBH
Germany
The processing of granules into coated long products requires high precision with tools and machine settings as well as sound expertise in the specific characteristics of the materials. As an extrusion specialist of steel cables and other long products such as wires, glass-fibre rods, we offer a wide service range: Plastic coating from ca. 0.5 to 24mm, PA, PE, PP, PUR and PVC and more, additives for special requirements, such as the UV and water resistance, circular cross sections and special dimensions and stock colours or your own selection.
Request for a quoteWILH. KÄMPER GMBH U. CO KG
Germany
With over 125 years of market experience, a network of specialised companies has evolved to serve the wide range of your customers’ requirements with the best possible quality. The focus of these long-standing cooperations is on making the most of available know-how while maintaining fair market prices. Besides bent wire and plastic components, a wide range of industries also require so-called hybrid parts. This combination of metal and plastic is found, for instance, in screw joints, connecting rods, seat elements for lumbar support, and medical engineering, among other areas. We work in close cooperation with specialised partners for plastics engineering. Our great efficiency in wire working technology and plastic injection enables us to create hybrid parts that satisfy the most stringent requirements.
Request for a quoteHFP BANDSTAHL GMBH & CO KG
Germany
Rubber-to-metal bonding Our adhesive build-up provides strong bonding between our metal carrier and your rubber. With our know-how, we are able to bond a wide variety of compounds such as NBR, CR, EPDM, SBR etc. for you. Plastic-to-metal bonding Whether PC (polycarbonate), PVC (polyvinyl chloride), ABS (acrylonitrile-butadiene-styrene), CAB (cellulose acetobutryate), PP (polypropylene), TPU (thermoplastic polyurethane), PA (polyamide) and polyolefinic plastics or other thermoplastics as well as duroplastics - we ensure that you achieve optimum adhesion between the plastic and our metal carrier.
Request for a quoteDYMAX EUROPE GMBH
Germany
LED Optimized medical adhesive for plastics and metals. Features: - LED optimized for 385 nm / 405 nm - Fast cure - Fluoresces blue under black lights - Low viscosity for improved wetting - Resists yellowing - Superior water resistance - Compliant with ISO 10993
Request for a quoteFERPLAST SNC
Italy
The strapping tool ST IMPA 13/16 is usable with both polypropylene strap and polyester strap (green, high resistance) from 12 to 16 mm. Given the high tightness of the seal it is recommended to use a polyester strap. The breaking load depends on the strap of choice.
Request for a quoteSHANGHAI NPACK AUTOMATION EQUIPMENT CO., LTD.
China
Single head capping machine is speically designed to meet the requirements universal screw caps,for some manufacturers have different types of caps, and do not have a big bulk production. The bottles are going on inline on a conveyor, and for different size of bottles in a wide range which are not required changeover parts, and big difference diameter or size of caps, only replacing a capping head, the replacing time takes less than 2 mins. OEM factories prefer to such a bottle capper. The capping system is driven by a servo motor, torque is adjustable, meet almost all the users needs, for different height of containers, the capping head is adjustable.The whole capper was PLC control with HMI operation. for this capper is designed for OEM and low capacity need, so we considered more flexiable of the capper working and operation, meanwhile the cost is acceptable for most of the users.
Request for a quoteTEMAS GROUP EXPORT PARTNERS
Turkey
Metal&Plastic Engraver: LaserPecker 3 is an optical infrared engraving machine for metal, and plastic. Using a 1064nm pulsed laser, no damage to the material. Ultra-High Precision: 4k precision, perfect picture reproduction. 0,01MM spot, visible details, LaserPecker 3 can help you complete what you what. Dual Red-Light Focus: Say goodbye to cumbersome measurement procedures and double light coincidence to determine the focal length. At the click of a button, you can automatically lift and descend and start engraving in the easiest way possible. Batch Engraving: Achieve batch engraving is not a problem. Use the batch button to engrave again with each click. Batch production of business cards and customized. You can open your own studio at home. No Restrictions: Unlimited time, place, and angle, just plug in and use. 360° rotation, no need to worry about the angle of engraving, bring a power bank, whether you are traveling or traveling, you can carry it with you.
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
For the lubrication of machine parts under high mechanical loads Silicone-free alternative for the lubrication of O-rings and sealings during assembly For the lubrication of plastic/plastic and plastic/metal combinations, e.g. beverage can holders in the automotive industry Advantages and benefits High shear stability Excellent adhesion on plastics and metals Compatible with plastics (see table OKS 468) Constant properties without drying, hardening or bleeding NSF H1 registered Silicone-free MOSH/MOAH-free
Request for a quoteLINDNER SPRÜHSYSTEME GMBH
Germany
good quality trigger sprayer with infinietly adjustable nozzle going from jet to fine mist, nozzle material: plastic or metal
Request for a quoteSIKO GMBH
Germany
Low-cost and compact turning handle made of glass-fiber reinforced plastic. Various sizes. Surface with rounded edges avoids accumulation of dirt. Hub made of plastic or metal. Various hub versions.
Request for a quoteIDG-DICHTUNGSTECHNIK GMBH
Germany
Elastomer or plastic sealing elements and also elements made of composite materials (elastomer + plastic or metal) can be compounded with metal detectable additives.
Request for a quoteResults for
Plastic metal - Import exportNumber of results
155 ProductsCountries
Company type
Category