Plaster primers - Import export

TECHNICAL DEFINITION Ready-to-use surface filler paste for filling interior holes and cracks. COMPOSITION AND APPEARANCE Water, calcium carbonate, sand, resin and various additives. SUITABLE SUBSTRATES All types of interior substrates : concrete, cellular concrete, cement, breeze block, brick, plasterboard, plaster tiles, plaster, old paint. COVERING Primer coat, smooth surface filler, wall coverings, paint REFERENCE DOCUMENTS • Filler meets EN 16566 standard • DTU 59.1 : Paint work TECHNICAL CHARACTERISTICS • Density : 1.5 • Dry extract : 82 % STORAGE 9 months in original unopened packaging away from frost and high temperatures. PREPARATION OF SUBSTRATES Substrates must comply with the DTU 59.1 standard i.e. be dry, clean, dust-free, hard and free of any trace of separating agent. APPLICATION Applied by hand using a filling knife or spatula. The thickness is 2 cm; to fill deeper holes, build up the filler in several steps The maximum thickness will be 1 cm per coat.

TECHNICAL DEFINITION Ready mixed filler for interior and exterior finishing work on walls and ceilings OSCAR is a water based filler giving a finish identical to oil based products. COMPOSITION AND APPEARANCE Resin emulsion containing calcium carbonate, rheological agent and various additives. The resulting paste is white. ACCEPTED SUBSTRATES Interior walls and ceilings • Plasterboard • Old paint • Plaster blocks • Primers Outside walls • Smooth concrete • Fine floated cement SUITABLE SURFACES • Wallpaper • Paint • Wall coverings • Thick plastic covering (RPE) TECHNICAL CHARACTERISTICS • Paste density : 1.9 • Particle size : very fine • pH : 7 APPLICATION Application is manual using a float or a painter’s knife. The maximum thickness will be 1 mm per coat. Smooth and sand if necessary before OSCAR has entirely set. Clean tools with water.

Cementing clout with high penetrating and insulating resin based on resinous latex in aqueous dispersion for external and internal, particularly suitable for the consolidation of insubstantial surfaces, To improve the adhesion of background plasters or mineral coatings or other mortars on new or old walls, on smooth or poorly absorbent surfaces, not uniform in absorption, concretes, weak, inconsistent or flour supports, on supports Base Chalk and Anhydrorene, on autoclavable cellular concrete blocks. Suitable for the consolidation of cementitious screets of low consistency. Packaging: Tanica 5-20 LT Color: Colourless Usage: Indoor/outdoor Dilution: 1:2 with clean water on concrete supports and on supports generally non-absorbent and/or particularly smooth and/or difficult to adhere • 1:4/1:5 with clean water on supports generally absorbent or on average Absorbent Yield: 8/12 sqm for LT, depending on the absorption of the support

Surface preparation; Before starting the application, the surface should be cleaned of dust and anti-adhesive substances. The smoothness and mechanical health of the application surface should be checked. Application; The appropriate consistency of the mortar is 25 kg of joint filler in 5-7 liters of water. With a low-speed mixer, the joint filler is mixed into clean water for 3-5 minutes so that no lumps remain. The mortar, which is left to rest for 5 minutes, is mixed again for a short time and becomes ready for use.

Acrylic copolymer emulsion based, surface filling feature, colored Pigmented, mineral-added, High Adherence Concrete Primer is a colored primer that allows concrete wall and ceiling surfaces to be plastered with gypsum plaster. Thanks to its quartz sand-added formula, it strengthens the adhesion strength of gypsum and gypsum-lime-based liquids to concrete surfaces, and prevents rapid water loss of the plaster and the formation of cracks due to it. For indoor use, not recommended for use on damp and wet surfaces. Do not store below 5 0C Scope of application Especially on concrete-based surfaces, vertical and horizontal (column, curtain, wall, ceiling and similar) is used as adherence primer before gypsum plaster

Suitable for any wood indoors and outdoors as well as cork and absorbent substrates (for example plaster). Insulating Primer is a weatherproof, flexible and moisture regulating primer which prevents seepage of wood and cork components. Works especially well on teak, red cedar, oak, larch and cork, as well as pressure treated wood. Water-based and solvent-free our Insulating Primer is particularly well suited for priming for white or bright coats. Insulating Primer masks outgassing of lindane and is also usable for insulating against nicotine, grease and soot- and water stains.