Pipes for well - Import export

We manufacture stainless steel branch pipes as well as stainless steel T-pieces with the following characteristics: 30°, 45°, 90° degrees (standard) material-no. AISI 304 / 304L at request also in aluminium at request also forming gas welded

ABS housing, in 1½2" and 2" connection, Optional with or without piping sets for all well-known filter brands, 3.5 bar

The noise levels in pipe and rod raising systems can be very high. A chute lined with secutex pipe modules ensures that noise levels are reduced and that surfaces are protected. The secutex material with inset perforated plates is particularly wearresistant and cushions the movement of pipes and rods very well. The cast sections are attached using drilled attachment holes. Segment sizes and joins are manufactured according to client requests.

Pipe supports are essential components of piping systems. Choosing the right support type is essential for a cost effective and well performing piping system. Novelty Steel fabricates; * Pipe Racks * Structural Supports * Pipe Shoes * Anchors * Rods * Rollers

PGS is a locking device for pipes made of polycarbonate or polypropylene. It is designed to seal cap nuts to prevent their twisting and disconnection of pipes, as well as the removal of gas meters and installation of bridge cables for bypass devices for the purpose of stealing gas. The pipe locking device consists of two semicircular-shaped parts with additional holes for the sealing rope. To install the pipe locking device, it is necessary to connect both parts on the mounting nut, put the sealing rope into the special holes on the sides of PGS, and install the seal (rotary or latch one). The seal should be placed as close as possible to the locking device. The tamper-evident seal and rope will prevent intruders from keeping the fact of removal of the seal and the locking device from the nut unnoticed. When an attempt is made to perform certain actions with the aim to steal gas or water, visible signs appear on the seal, which is evidence

DSC for determining the oxidation induction time for polymer pipe and protective pipe systems as well as moulded elements made of polyolefin.

DSC for determining the oxidation induction time for polymer pipe and protective pipe systems as well as moulded elements made of polyolefin. Suitable for OIT test and Melting point determination According to ASTM D3895 ISO11357 EN728 ASTM D3418 up to 500C Including standard Tin, Ind pellets for calibration checkout, 400pcs of aluminium pans, Software CD (windows based software including Report out to WORD), N2 and O2 rotameter mass flow controller, Hoses and connectors, Software also has data export to advantage Software for analysis, DSC measuring cell according to the heat flux principle, temperature sensors for control & sample temperature, Connection for Purge gas flow to the sample for 2 gas types, Temperature accuracy 0.1 C, Sensitivity: 3.6 to 4.0 μV/mW , Sensor Time constant: 2.5 s, calorimeter accuracy of ± 2% and calorimetric precision of ± 0.5% or better, Two connections for purge gas-Inlet to the sample & 1 connection for protective gas Inlet with gas flow adjustment,

Mazak tube laser in very good condition Can be inspected under power upon appointment. Serviced by Mazak UK. ONLY 360 cutting hours (1 hour per week) !!! New turbine in July 2021 (13563 hours). Automatic and continuous 3D laser cutting of long structual material High precision cutting of complex features Unsurpassed 3D laser cutting of long round / square / rectangular pipe, as well as H, I and L beams Just load long material in the loading station, and 3D cutting is performed automatically as well as transfer of finished parts to the unloading station

SFSB SUPPLIES FLANGES, FITTINGS & PIPES TO THE CHEMICAL, PETROCHEMICAL, OIL AND GAS INDUSTRIES, THE OFFSHORE, VESSEL BUILDERS, PIPING CONTRACTORS AND ENGINEERING AS WELL AS COMPONENTS FOR POWER GENERATORS AND NAVAL CONSTRUCTIONS. Furthermore, we are an experienced partner for customized production solutions, in the field of atypical flanges, rings and special forged components. As your competent partner, we enable you to purchase your entire specification from one single source. As a trading and manufacturing enterprise, our know-how is there for your benefit. Our strong customer-oriented approach challenges our team’s experience to guarantee skilled support in every phase of business. We take pride in long-standing relationship with our customers and our manufacturers.

Sheet deep well pipes are made of St 37 material in accordance with DIN 1700 norms. Sheet drill pipes are assembled by welding to each other. It is resistant to underground reactions (collapses). Although the pipe weights cause an axial stress during the well lowering, both the pipe and the welding structure are strong enough to meet these loads. HASS Sheet Drilling Pipes are made of material conforming to TSE standards with wall thicknesses of 4 mm - 5 mm - 6 mm and are TSEK certified. Hass bridge type filter pipes are used to take precautions against silty in silty lands. Hass manufactures fittings such as reduction and pump flanges for Hass Sheet Drilling Pipes.

The galvanized pipe is necessary for the supply of industrial water, steam, gas, chemicals, the production of steel structures and is in great demand in the food industry, namely, in elevators, granaries, seed pipes, as well as solar power plants. Thanks to the zinc coating, which increases the service life of the metal at times, the galvanized pipe has gained a reputation as a reliable and durable material, and is in demand in the country's market both among the population and in production. It is used to make street road poles, ventilation systems, drains, ladders, fences, water pipes, fences, boiler rooms, gas pipelines, brackets, etc. Despite the fact that the price of a galvanized pipe is slightly higher than long products, its use is justified by 100%. You can contact us by mail - marketing@stalevar.com or by phone +380675624220.

Rolled aluminum is in demand and is applicable in production, construction and in everyday life, chemical laboratories, medical institutions. An important quality of aluminum is its weight and resistance to aggressive environments. Aluminum, if used correctly, will be an excellent durable material; it is processed mechanically on special equipment. The following types of rolled metal products are made C652from it aluminum sheet GOST 21631 (corrugated), corner, channel, Tavr, I beam, circle, pipe, wire, as well as from aluminum alloys produce various foundry products for production and household needs. Aluminum section metal products are produced by hot rolled (hot rolled) and cold rolled (cold rolled) methods, general and technical. application. Aluminum alloys Primary aluminum index A, with a max aluminum content of 99.5%; Aluminum technical AD with a high content of Fe and Ci from it are made aluminum sheets smooth, corrugated, pipes, packages, corner;

The WARP portable is a mobile, radar-based hand-held gauge for selective wall thickness measurement, specially designed for medium and large pipe extrusion as well as for sheets. The application possibilities are very flexible, whether as a quick centering aid in the start-up process, for final production control or as a stock control device. Not only wall thicknesses at pipe ends can be measured, but also the progression inside a pipe section or a sheet. The measurement itself is performed at the push of a button. The last 500 measured values including the measuring angle on the pipe as well as the time stamp are stored. Over 400 WARP portable sold speak for themselves. Other advantages/features: — Hand-held measuring device for wall thicknesses from 2 to 110 mm (depending on material) — Measured value log including measuring position on the pipe (last 500 measured values) — Intuitive handling — Splash-proof housing (IP54)

The WARP CP is an inline measuring system with radar-based wall thickness sensors for detecting the various structures of a corrugated pipe. Outer and inner diameters, as well as the wall thicknesses of the bell, crest, liner, and valley can be resolved. The system is available for large, corrugated pipes with diameters from 300 mm. Since the corrugated tube has different structures, it is therefore necessary to assign the measurement data to the corresponding position on or in the tube. The WARP-CP algorithms do this automatically and prepare the data for the user in such a way that he receives different graphics and corresponding measurement data for each structure. Other advantages/features: — Non-destructive, contactless, and automated inline measurement of all relevant structures of the corrugated tube — No waste due to destructive measurement — Repair of critical thick and thin spots — Saving of material overweight in the end product

We stock PE plates, PE pipes as well as custom made products HDPE plates in natural, PE 300, PE 500, PE 1000, in strengths from 2 mm etc PE pipes, pipe connections, PE pipe bends in different dimensions Custom made plastic vessels in accordance with drawing or pattern

ABES Bicycle-Stand 450-2 is a frame made from bent steel tubes with a 42,4 x 2,5 mm diameter, an overhanging rear pipe, as well as mutually offset pipe ends. Only one foundation is required. Optional: convex cover plate with a 300 mm diameter. Mounting Concrete embedment (only one foundation required). Finish – Stainless steel 1.4301 pickled and smoothed, electropolished to customer’s requirement (high-gloss) – surcharge. – Hot-dip galvanised steel ST37, alternatively with powder coating in standard RAL colours or DB 703. – Other colours available on request at a surcharge. Note: For the removable version, the cover plate is needed. Overview: – Pipe diameter: 42,4 x 2,5 mm – Measurments: (H above ground x L x B in mm): 845 x 1240 x 244 – Optional: convex cover plate with a 300 mm diameter

Pre-configured foam insulated installation box 25-WL-WT-T for wash basins, for use in dry wall constructions. The box provides thermal insulation and condensate protection through its foam body. With two female threads Rp 1/2 and two MultiFit®-Flex (multilayer pipe) system pipe connections 16 mm as well as drainage connection 50 mm. Overall dimension: 200 x 350 / 40 x 70 mm (Length x width w/o plate/width with plate x depth).

With our pipe calibrating machine, we can reduce the end diameters of the pipes of the desired diameters, as well as expand them and turn them into end pipes with notches. Our molds; Ø45 We can produce molds according to the number of production, and we can prepare the order you want in the dimensions.

The weld edge forming/milling machines shear the edge with the help of a cutting wheel, completely self-propelled, noiselessly, and dust-free, leaving a rough bevel. They produce perfect welding edges with the best price-performance ratio. They can chamfer plates and pipes, including large diameters, as well as small parts and pipes with low thickness.

We manufacture constructions for energy in accordance with ISO 3834-2 and other certificates. The quality of our welded pipes is certified by the positive audit assessments. Certification body have qualified us as the supplier of the company which is the leader in the global energy market. We produce wide range of steel pipes for equipment of electric power production and transmission.

We supply round, square, hexagonal and flat barsteel in a broad range of dimensions and steel qualities, includes seamless and welded pipes and tubes according to EN, ASTM and API standards, in a wide variety of steel qualities. They are selected by construction, production and industrial companies due to their durability and multi-purpose use. Our extensive offer allows you to select the most optimal variant for your needs

Coloricio offers a wide range of flat and rolled products that prevents steel rust and corrosion through excellent surface finish related to zinc coating: cold-rolled steel/aluminum hot rolled (pickled and oiled) steel/aluminum hot dip galvanized steel/aluminum

The water and gas pipe (DU) is produced from hot rolled sheet metal and is necessary for the installation of water and natural gas supply pipelines for residential and non residential buildings. Due to its low cost, the pipe is in demand in everyday life, mechanical engineering and at construction sites; metal products and steel structures , machine parts and other popular materials are produced from it . The vgp pipe is easy to install, its service life is from twenty to fifty years or more (time tested). In comparison with plastic counterparts, it is an excellent heat dissipating product and is more resistant to high temperatures and loads. Pipe DN GOST 3262 75 standard sizes from 15 to 50, wall 2.5 4 mm, length 6 lm. Longitudinal electric welded pipe is necessary for the production and construction of structural products, while the dimensional grid of longitudinal welded pipes differs in a larger direction from DU pipes F external 10 2000 mm; Wall up to 40 mm;

The water and gas pipe (DU) is produced from hot rolled sheet metal and is necessary for the installation of water and natural gas supply pipelines for residential and non residential buildings. Due to its low cost, the pipe is in demand in everyday life, mechanical engineering and at construction sites; metal products and steel structures , machine parts and other popular materials are produced from it . The vgp pipe is easy to install, its service life is from twenty to fifty years or more (time tested). In comparison with plastic counterparts, it is an excellent heat dissipating product and is more resistant to high temperatures and loads. Pipe DN GOST 3262 75 standard sizes from 15 to 50, wall 2.5 4 mm, length 6 lm. Longitudinal electric welded pipe is necessary for the production and construction of structural products. You can contact us by mail - marketing@stalevar.com or by phone +380675624220.