Pipes for heating - Import export

Avantair is unique in the marketplace as it uses heat pipe technology. This advanced air-to-air cooler is particularly recommended for challenging environments like offshore and desert locations.

Temperature control of liquids Tube coil heat exchangers (so-called tube cooling coil heat exchangers) are generally used to control the temperature of liquids. This system can also be used to heat or cool liquids in a controlled manner. Due to their special shape, pipe coil heat exchangers are sometimes also called hairpin heat exchangers. Inexpensive applications The simple and solid structure enables it to be used in cost-effective applications. Coiled tube evaporator systems are ideally suited for brine and glycol applications. Classic variant Coiled tube evaporator systems are a classic and proven variant in the field of heat exchanger systems. Coiled tube heat exchangers are often used in ice storage systems or in the production of cold water units. In ice storage systems, coils can be used to achieve an even build-up of ice around the coils.

All types of fireproof doors. Fireproof shutters. Products for shielding of all types of technical equipment (electrical cables, insulated and non-insulated sanitary heating pipes, PP/PE pipes, fireproof dampers). Fire-protection products for ventilation ducts and cable trays. Fire-protection products to protect my load-bearing structures (fireproof plates, paint, flocking, etc.) Fire-protection products for fireproof compartmentalisation: fireproof partitions and ceilings. Products for decorating elevator cars made of materials that are difficult to ignite. Fireproof valves, grilles, sleeves, seals and hatches. Fireproof compartmentalisation for protecting people and property Fireproof compartmentalisation, the means used Fireproof compartmentalisation is done by means of: Fireproof doors, curtains, shutters Fireproof partitions Fireproof ceilings Fireproof shielding Contact us for a quote or informations.

You state your requirements and send us the material properties. KASAG then configures the thermal and hydraulic calculations for the desired heat exchanger. The realization is implemented according to the available drawings or on the basis of a comprehensive engineering. KASAG offers all processes necessary for that, such as the orbital-welding process for manufacturing heat exchangers. With KASAG, you can be sustainably flexible.

It is characterized by good susceptibility to machining. It is very susceptible to hot forming and forging. It is widely used in the production of forged parts with complicated shapes parts for pipe fittings industrial terminals heating elements plumbing industrial fittings We also have other nonferrous materials on sale.

Pressure vessels/containers and reactors must meet the highest quality requirements. The pressurized objects are designed at KASAG according to the relevant regulations and subsequently produced, with great enthusiasm, using the most modern technology. Stainless steel and special materials, such as duplex and nickel-based alloys (Hastelloy, Inconel) are processed. All our production experts have the mandatory certificates, and have mastered the welding process MIG, MAG, TIG, Plasma and Orbital and work solely with certified welding consumables. The pressure vessles and chemical reactors are finally polished, pickled, passivated and tested using non-destructive test methods. KASAG products meet all your standards.

Copper pipes are used as heating and cooling coils (very soft and, therefore, easy to bend).

Ceramic Insulated (Band) Heaters are predestined for high-temperature applications beyond 450 °C, for example for pipe heating in process heat technology, especially when gases are involved. Ceramic insulated sectional surface heating elements are also brought into action where a heat storage capacity is needed, as in hot plates the case. With the heating surface of ceramic flat heaters being composed by small-limbed ceramic elements with aligned holes in the centre for the resistance coils to be fed through, ceramic sectional heating mats are also applicable for bent or cylindric surfaces. Like Micanite insulated flat heating elements also Ceramic insulated elements can receive a metal sheath. The latter provides additional protection against mechanical load and allows for attaching connection boxes. Another advantage is the easy installation by means of mounting holes in the metal cladding.

Short description: Hochtemperaturbeständig High-temperature-resistant and strong silicone adhesive and sealant. Especially suited for heat-loaded, elastic adhesive bonding and sealing. Very good adhesion on steel, aluminium, glass, ceramic and many other materials. Applications: Industrial furnaces, Flue gas boxes, Heating facilities, Exhaust pipes and Heating cabinets and furnaces. The outstanding product properties (e.g. permanent elasticity) are maintained in the entire temperature range from -60°C to +300°C. Properties: High temperature resistance up to +300°C, Very good UV stability, Excellent resistance to weathering and aging, Good chemical resistance, Elongation to break approx. 500% and Colour: red.

Heating system for jams and marmalade The KASAG heating system for jams is used at industrial baking lines for preparing jams and marmalade. Jams or marmalade are conveyed with a pump via heated pipes. Static mixers ensure excellent heat transmission and very short process times. Tempering unit for chocolate for chocolate The KASAG tempering unit is used for heating, cooling, maintaining the consistency of the chocolate and for optimising production processes with chocolate.

There are two different construction types.   It's possible to create a design using a  little construction space using the customer's data. The Thermo-Fluid S is connected directly between the oven pipe (or the heating system) and the chimney.  The operating temperatures are up to 300°C (standard). The Thermo-Fluid S is low maintance with low pressure drop in the flue gas. Depending on the application you can have energy savings up to 15 %.     A bigger construction is the Thermo-Fluid M, which is optimised for utilisation of waste heat from process air, flue gas or exhaust air. An energy yield of up to 1600 kW is possible, whereupon the pressure drop in the process air is less than 1.5 mbar. The pressure drop in water circuit is less than 200 mbar.   This Shell and Tube heat exchanger is low maintance using the small type of construction. The Thermo-Fluid M modular and the standard temperatures are up to 300°C too.    Both Shell and Tube Heat Exchangers are low maintance. One-off or

Piping includes a pipe or system of pipes, pipe spools, tubing, fittings, expansion joints, hoses, or other pressure bearing components as appropriate. Pressure piping systems transport fluids under pressure. Components of pressure piping include: a. Pipes: The main conduits for fluid transport. b. Fittings: Connectors, elbows, and tees that join pipes together. c. Valves: Used to control and regulate the flow of fluids. d. Flanges: Connect pipes to other components like valves, pumps, or tanks. Novelty Steel is an experienced fabricator of pressure vessels for power, oil and gas, chemical, food and mining industries. With vast CNC Machinery Park and experienced engineering team, Novelty Steel produces bespoke CNC Machined parts according to the European Norms. Our fabrication portfolio covers: * Pressure Vessels * Boilers * HRSGs * Heat Exchangers * Pipe Spools * Piping Components * Pipe Supports * Process Skids

single inlet/outlet line or combined inlet/outlet line with stationary or rotating syphon pipe universal usecooling, heating, clamping series with ball bearings, graphite bushbearing or solid grease ballbearings bellows sealing available in stainless steel CDCartridgeDesign PRESSURE MAXIMUM 6,0 bar heat transfer oil 10,0 bar air nontoxic gases steam 17,0 bar water TEMPERATURE MAXIMUM 300 °C air heat transfer oil nontoxic gases steam vacuum water SPEED MAXIMUM 600 1/min DN 80 (3") DN 100 (4") DN 125 (5") SIZEDN 80 (3") DN 100 (4") DN 125 (5")

Air-water / air-air heat exchanger as smooth tube heat exchanger up to 1,000 ° C Smooth tube heat exchanger as an air / water heat exchanger In the case of air-water heat exchangers (also called gas-water heat exchangers), a temperature exchange takes place between a gas (usually air) and a liquid. As a rule, the liquid medium flows inside the pipes, while the gaseous medium flows around the pipes outside the pipes. Smooth tube heat exchangers can cover various areas of application: heating, cooling and condensing as well as heat recovery. Smooth tube heat exchanger as air-to-air heat exchanger Smooth tube heat exchangers are also often used as air-to-air heat exchangers. In this application, a gas (e.g. exhaust air or exhaust gases) flows inside the pipes and a gas (e.g. fresh air) outside the pipes around the pipes.

CNC sheet metal processing, CNC laser parts, stamped parts, fine stamped parts, bent parts, pipe processing, cold forming, heat shielding sheets, deep-drawn parts, sheet metal parts from progressive dies, sheet metal parts assembled, sheet metal parts with surface treatment, sheet metal parts in large series, one-off production, prototypes.

Square cartridge heaters are used where much power has to be installed near the surface of a tool, e.g. in cutting knives, sealing stations or hot plates. With a soft, malleable condition in stainless steel or nickel sheath square cartridge heaters can easily be pressed into common milled rectangular grooves. Apart from the advantageous heat transfer over ¾ of the sheath, it is not necessary to cement or cast in the heater which is imperative for round cartridge heaters. Unlike tubular heaters which are also available in square sections (see chapter Flexible Heating Pipes), the square cartridge heaters have the termination on one side and can be loaded with 16W/cm² (2.5W/in²) due to their special inside construction.

Piping includes a pipe or system of pipes, pipe spools, tubing, fittings, expansion joints, hoses, or other pressure bearing components as appropriate. Pressure piping systems transport fluids under pressure. Components of pressure piping include: a. Pipes: The main conduits for fluid transport. b. Fittings: Connectors, elbows, and tees that join pipes together. c. Valves: Used to control and regulate the flow of fluids. d. Flanges: Connect pipes to other components like valves, pumps, or tanks. Novelty Steel is an experienced fabricator of pressure vessels for power, oil and gas, chemical, food and mining industries. With vast CNC Machinery Park and experienced engineering team, Novelty Steel produces bespoke CNC Machined parts according to the European Norms. Our fabrication portfolio covers: * Pressure Vessels * Boilers * HRSGs * Heat Exchangers * Pipe Spools * Piping Components * Pipe Supports * Process Skids

Piping includes a pipe or system of pipes, pipe spools, tubing, fittings, expansion joints, hoses, or other pressure bearing components as appropriate. Pressure piping systems transport fluids under pressure. Components of pressure piping include: a. Pipes: The main conduits for fluid transport. b. Fittings: Connectors, elbows, and tees that join pipes together. c. Valves: Used to control and regulate the flow of fluids. d. Flanges: Connect pipes to other components like valves, pumps, or tanks. Novelty Steel is an experienced fabricator of pressure vessels for power, oil and gas, chemical, food and mining industries. With vast CNC Machinery Park and experienced engineering team, Novelty Steel produces bespoke CNC Machined parts according to the European Norms. Our fabrication portfolio covers: * Pressure Vessels * Boilers * HRSGs * Heat Exchangers * Pipe Spools * Piping Components * Pipe Supports * Process Skids

We provide extensive services in welding to a variety of industries. We specialize in pipe welding in refineries, boiler rooms, heating plants, food processing plants (dairies, etc.), air and water distribution in manufacturing halls and other industries. We use a wide range of welding methods including TIG, MIG/MAG (CO2 shielded), AC/DC (coated electrode) and flame welding.

Underfloor heating pipes are the most important component of an underfloor heating installation. Thanks to its features, it will provide a homogeneous heat distribution in the house or building where heating is desired. Since it will be laid under the floor and covered, choosing the highest quality products is the most important factor for years of trouble-free use. Aldea oxygen barrier underfloor heating pipe is made of high quality material and will perform its heating function without any problems for many years when applied according to the rules. Since underfloor heating systems operate at lower temperatures, they heat up and cool down slower. Once full heating is achieved, much more efficient heating can be achieved by consuming much less energy compared to radiator or blower systems.

Aldea pipe holder hook is one of the necessary components for fixing pipes in underfloor heating installations.

Aldea pipe connection fitting is one of the necessary components for pipe connections in heating installations. Gland quality is very important for the life of the installation. It is inevitable to experience problems in a short time in installations made using poor quality fittings. For this reason, while looking for affordable prices even for the smallest component, high quality should not be compromised.

Aldea female return fitting is one of the components required to provide pipe connections in heating installations. Gland quality is very important for the life of the installation. It is inevitable to experience problems in a short time in installations made using poor quality fittings. For this reason, while looking for affordable prices even for the smallest component, high quality should not be compromised.

Aldea male return fitting is one of the components required to provide pipe connections in heating installations. Gland quality is very important for the life of the installation. It is inevitable to experience problems in a short time in installations made using poor quality fittings. For this reason, while looking for affordable prices even for the smallest component, high quality should not be compromised.

Trie Mapp gas cylinder itseif conforms to European Standard EN12205 making it ooth tough and impact resistant.The gas cylinder has a standard valve connection type - “CCA 600 (1* x 20 UNEF Thread}' which is ideal for use with a wide range of the most popular gas blow torches on the market including:Rothenberger Super-Fire 2,Quickfire Bernzomatic,Faithful.Monument,And many more.The Mapp gas is ideal for Soldering, Brazing. General Plumbing, Thawing frozen pipes. Heat Treatment of rusted metal components, lighting a oarbecue, Cooking, Searing meat and many more applications.This Pack Includes:1x Map-Plus Cas Cylinder.

Bemzomatic 14.1 02. MAP-Pro cylinders provide maximum heat output for mere efficient use and faster work times. Designed for heavy-duty use including soldering large copper pipes, brazing, and heat-treating, the slim, lightweight cylinder is easy to grip and maneuver. The flame temperature in the air is 3,730 degrees Fahrenheit. Use with hand torches designed for MAP-Pro fuel, including Bemzcmatic torches The flame temperature in the air of 3,730 degree F / 2054.4 degrees C. ideal for medium to heavy soldering and Brazing Faster heat transfer than propane fuel Slim, the lightweight cylinder is easy to grip and maneuver Durable steel construction CCA600 connection

Aldea mini valve collector is the component through which the management of an underfloor heating installation takes place. The underfloor heating pipes coming from the rooms are connected to these collectors, and the hot water from the heating source is distributed homogeneously to the rooms through this component, giving you full control over your underfloor heating installation.

Aldea self-valving collector is the component through which the management of an underfloor heating installation takes place. The underfloor heating pipes coming from the rooms are connected to these collectors, and the hot water from the heating source is distributed homogeneously to the rooms through this component, giving you full control over your underfloor heating installation.