Pipeline valve - Import export

The valve controls downstream flow to a pre-set and constant value in order to limit water consumptions and preserve pipeline fill rate or to set a maximum demand value. The valve is controlled by a differential hydraulic pilot that senses the pressure fall generated by water flow into a calibrated orifice.

Category Hydraulic systems, valves and components / Valves / Pipeline valves / Load holding valves / Single-acting, control intern / Housing steel Product number supplier 468013602

Category Hydraulic systems, valves and components / Valves / Pipeline valves / Line-break protections / Insertions for line-break protections Product number supplier 414993

The function of gaskets is to prevent the leakage of medium outside the equipment. Static seals are used in many applications such as plumbing and heating systems, sealing fasteners, containers and pipeline construction. They are washers, rings or frames which generally are adapted to the whole width of the sealing surface. They can be used for example in flange connections of pipelines, pumps, motors, valves, etc. The gaskets are made of various materials such as: Rubbers, fiber plates, synthetic plates, graphite, PTFE, etc.

Forged components for nuclear reactors, boiler systems, piping Valves are pivotal in various industrial contexts. Forged parts designed for nuclear reactors, boiler assemblies, pipeline construction, and safety valves are crucial elements in various industrial applications. Safety valves, typically pressure relief valves, stand out as paramount safety features within most systems. Their primary function is to safeguard pressurized vessels like steam boilers, reactor vessels, and pipelines from potentially hazardous pressure surges. In the event, that pressure exceeds safe limits, these valves release trapped gases, vapors, or liquids either into the atmosphere or into designated manifold systems. The West German drop forge KB Schmiedetechnik GmbH in Hagen (NRW) boasts decades of proficiency in crafting drop-forged components tailored for pressure applications compliant with the Pressure Equipment Directive (PED) and for nuclear facilities adhering to KTA, AVSD, and RCCM standards.

Dismantling joints perform an important role in the design and implementation of pipelines including pumps, valves and meters. They provide easy installation and disassembly of valves, pumps and pipe sections. Besides the dismantling joint compensate for axial displacement of the pipe during installation and dismantling. The AVK dismantling joint type Redijo is a double flanged dismantling joint with one follower end-ring.

KB Schmiedetechnik GmbH in Western Germany has decade long experiences in the production of forgings for the energy market. Examples: •Forgings for nuclear power plants and hydrogen technology •Forged valve parts for nuclear and hydrogen applications •Forges components for nuclear fission and fusion reactors •Non-standard flanges and fittings of stainless steel like 316L or duplex •Special materials resistant against neutron or hydrogen embrittlement •Acid-resistant forgings for molten salt applications like fluid reactors or solar thermal power plants. In addition to this KB hold 5 certifications for the international maritime industry: •American Bureau of Shipping (ABS) •Bureau Veritas Marine & Offshore (BV) •Det Norske Veritas (DNV) •Lloyds Register (LR) •Nippon Kaiji Kyōkai (ClassNK) Examples are forged parts for industrial valves, boiler and pipeline construction. This includes various valve components, pipe connecting elements and special flanges.

The valve avoids reservoir emptying and flooding dues to casual pipeline failure. The valve is controlled by a differential hydraulic pilot that senses flow speed closing completely main flow when senses critical speed values.

For everything from pipeline valves to 10,000L agro-chemical containers. LMK Thermosafe Ltd manufacture a wide range of drum and container heating products used in process industries world-wide, including Flexible Heating Jackets in a variety of sizes, materials, power levels and voltages. Custom size Flexible Heating Jacket The Flexible Heating Jackets are so versatile that they can be specifically tailored to fit a multitude of different containers suitable for virtually any size and specifications. This bespoke service offers ideal solutions for customers requiring non-standard containers to be heated as rapidly as possible and efficiently insulated. However big or small the application, our development team based at our UK headquarters can adapt tried and tested designs to produce the best results. A wide standard range is also available from stock to fit 25, 50, 100 or 205 litre drums as well as 1000 litre IBC containers, totes and gas cylinder applications.

Closed circulation vacuum system is consisted with liquid ring vacuum pump and compressor, liquid and gas separator tank, heat exchanger, instrument and valves, internal pipeline, and common base plate. The pumped gas enters the liquid ring vacuum pump/compressor from the pump inlet, after compressed by the liquid ring vacuum pump/compressor, the gas will enter to enter the gas-liquid separator together some of the working liquid. Inside the gas-liquid separator, the gas and liquid are separated, and the gas is discharged from the pump outlet, and the working fluid go from the heat exchanger and enter the liquid ring vacuum pump/compressor for recycling.

Application as inline armature with venting or breather valve function for vessels. Preferably used for installation in pipes. Depending on the installation, the valve can be used as pressure or vacuum valve. It can also be used as non-return safety device or overflow valve.

Application as inline armature with venting and breather valve function for vessels. Preferably used for installation in pipes.

Application as inline armature with venting and breather valve function for vessels, used preferably for installations in pipes. The exhaust air is carried away via a pipe. The ventilation is also effected via a pipe, which is preferably used to carry inert gas. Functions the same as KITO® VD/o3-… (type sheet F 18 N).

EMA basket strainers are being used where the line can be shut down for short periods to clean or change the baskets. EMA standard fabricated pipeline strainers meet customers’ expectations and the highest standards. EMA pipeline basket strainers are being used in piping applications where a greater screen area to pipe area ratio is required. By providing a greater screen area than a Y-strainer, you are optimizing the total open area and minimizing potential pressure loss through the basket. EMA strainers are used to protect pipelines, valves, and spray nozzles from water flow problems. They reduce the necessity for frequent cleaning and provides a cost and time saving benefit with less downtime.

Non-Return Valves WITT non-return valves protect plants, pipelines and outlet points against reverse gas flow and meet all relevant standards and regulations. The product range of non-return valves includes a large choice of nominal sizes (up to DN200) and flow rates (0.35 – 106 SCFH). The sophisticated valve technology of WITT non-return valves provides small pressure drops making them also suitable for applications with smallest opening pressures. A high-quality sealing system with elastomeres prevents leakages, and dirt filters at the inlet point assure long service life of the non-return valves. Some non-return valve models can also be used as flashback arrestors. All non-return valves can be mounted in any orientation, are available with all connections, in brass and stainless steel and are suitable for almost all technical gases.

Non-Return Valves WITT non-return valves protect plants, pipelines and outlet points against reverse gas flow and meet all relevant standards and regulations. The product range of non-return valves includes a large choice of nominal sizes (up to DN200) and flow rates (0.35 – 106 SCFH). The sophisticated valve technology of WITT non-return valves provides small pressure drops making them also suitable for applications with smallest opening pressures. A high-quality sealing system with elastomeres prevents leakages, and dirt filters at the inlet point assure long service life of the non-return valves. Some non-return valve models can also be used as flashback arrestors. All non-return valves can be mounted in any orientation, are available with all connections, in brass and stainless steel and are suitable for almost all technical gases.

rock-phin is an inline basket filter. It has a strong perforated metal sheet basket and is manufactured in stainless steel. It is the optimal solution to protect downstream elements in the water pipeline such as pumps or valves. More generally an inline basket filter can be used as a coarse filter in processes that use water from wells, rivers or canals typically full of large suspended solids.