Results for
WÖHLER GMBH
Germany
Video inspection in a case: With the new Wöhler VIS 350 camera system, you not only have everything you need to inspect waste water pipes, flue gas and ventilation lines as well as industrial systems – you can also precisely locate the damage and accurately document the results of the inspection.
Request for a quoteTHOMSON MACHINERY BV
Netherlands
Eagle X-ray inspection system Pack 430 Pro (as new, only used as demo machine) for product dimensions max. 430mm wide, max. height 215mm Refurbished, new conveyor belt, new detector ! Technical data: Installation length:1.830mm Conveyor belt width:430mm Generator: HR 9 Feeding height:ca. 850mm Delivery height:ca. 850mm Dapu9dl Diodes:optional with 0,8mm or 1,2mm MDX diodes (DUAL ENERGY) Conveying speed with 0,8mm diodes:max. 1,10m/sec Conveying speed with 1,2mm diodes:max. 1,30m/sec Operating hours:approx. 800 Protection class:IP 65 Year of manufacture:2017
Request for a quoteBIZERBA SE & CO. KG
Germany
Efficient control of packaging and label content in labeling lines The Bizerba LabelSecure vision inspection system automatically checks label position and texts. Bizerba LabelSecure can be integrated in conveyor lines with dynamic checkweighers. Thereby offering a high level of flexibility and adaptability to existing systems. Used with an inline dynamic checkweigher the system will add another level of protection on your production line. Consider the Dynamic checkweigher CWEmaxx. The system will checkweigh and reject any over filled and under filled packages. In addition, the vision inspection system performance is impressive, automatic control of label position, texts and film colour. Any packages that do not conform to the programmed or set criteria will be rejected. Also, package sizes and bar codes are verifiable. All packages that fall outside of the date range set up in the Vision Inspection System will be rejected, Ensuring out of date or short sell by dated products...
Request for a quoteBIZERBA SE & CO. KG
Germany
Complete optical packaging inspection Vision inspection system SealSecure checks the seal and seams on the package, labels and information on the top and bottom or the sides of the products. The stand-alone vision inspection device detects non-conforming packages prior to packaging and rejects them, if there are product, package discrepancies or deviations. The staff are then immediately warned visually and audibly in order to be able to intervene and rectify the problem. Vision inspection system SealSecure prevents extensive and costly rework, eliminating claims and product recalls due to non-conforming packages. In addition, the Vision inspection system SealSecure ensures that only flawless products reach the market or end user. In addition, all the product images are saved in the production system and the relevant production reports are generated, the vision inspection system contributes to complete traceability of the production line. The Vision inspection system SealSecure...
Request for a quoteBIZERBA SE & CO. KG
Germany
The end-of-line X-ray inspection system offers maximum safety. By using X-ray technology the XRE-D detects contaminated, damaged and defective products and packagings. Besides metallic and non-metallic foreign objects it detects missing, defective or misshaped products as well as overweight or underweight. Thanks to an efficient quick conveyor belt change system the belt can be changed within two minutes. The product inspection system XRE-D X-ray inspection system detects all foreign objects, which due to their density, chemical components or mechanical dimensions absorb X-rays at a higher or lower degree than the surrounding product. During production numerous detection tasks can be safely fulfilled such as the detection of metals, glass, ceramics, stones, raw bones, PVC, Teflon, rubber, glass fibre reinforced plastics etc. In packaged or unpack-aged food (non-magnetic stainless steels and non-ferrous metals in aluminium packaged food). X-Ray inspection is an ideal solution for...
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
OPTIGRÜN INTERNATIONAL AG
Germany
Special version of the Optigreen Triangle Maxi Inspection Cham-ber TMK with perforated intermediate floor to guide excess water from higher roof areas.For feeding and conveying excess water from rooftops located higher up to floors located lower down Conveys water through downpipes directly into a tie-in conduit with an open inlet at the top, e.g. in case of: Cascading drainage from smaller top floors, feeds roof drainage water from downpipes on façades into drainage levels of underground car parks or similar Can be connected to up to 6 WLP Plus and 3 TSK With perforated sheet metal intermediate partition Walkable
Request for a quoteOPTIGRÜN INTERNATIONAL AG
Germany
Inspection chamber for use on greened or gravelled roof areas above drains in edge areas directly before any ascending structural components.Special inspection chamber for use over roof drainage outlets at the edge before ascending components, especially for outlets at the side through the fascia Chamber walls and cover with inlet slots, possible to connect 2 lengths triangle water conduit plus on three sides Chamber cover with inlet slots, compressive strength approx. 150 kg Insensitive to humid acid Reverse releasable 80 mm high
Request for a quoteOPTIGRÜN INTERNATIONAL AG
Germany
Optigrun Edge Inspection Chamber RKS 80 for use on greened or gravelled roof areas above drains on edge areas directly before any ascending structural components.Especially suitable for use around edges in front of rising components Above rainage outlets for green or gravelled rooftops Can be connected to 3 strands of WLP Plus Triangle Water Conduit Inspection lid with entry seals Insulation wedge profile released from the back Walkable
Request for a quoteOPTIGRÜN INTERNATIONAL AG
Germany
Optigrun Inspection Chamber TAR 250 to keep roof drainage outlets free with four connection options for TAR 80/250 or TAR 120/250.For pressure drainage and keeping drainage outlets free 4 possible connections for the drainage gutter TAR 80/250 or TAR 120/250 (preperforated openings) Chamber walls and lid with entry seals With aluminium chequered plate Walkable
Request for a quoteOPTIGRÜN INTERNATIONAL AG
Germany
Optigrun Combi Inspection Chamber TKS Plus is a control shaft for use as roof outlet inspection; includes base plate and cover. Extendable in 100 mm increments. Combinable with Triangle Water Discharge Profiles.
Request for a quoteNEXTSENSE GMBH
Austria
OSIRIS is a stationary, optical measuring system for inline control of dimensional accuracy and surface quality of long products. With state-of-the-art laser light cutting technology and high scanning rates, the OSIRIS systems offer a complete 3D reconstruction of the product. With the OSIRIS Hot version, up to 1,100 degrees hot long products can be analyzed. The measurement results are displayed in real time on the control terminal and thus allow early corrective action to increase throughput and product quality. The surface inspection function automatically detects and classifies deviations in the product surface (peeling, blow-outs, scoring, rolling etc.). In addition, profile cuts of the long product are simultaneously generated to check length dimensions such as width and height, various radii and angles. Different system sizes allow the measurement of large and small long goods.
Request for a quoteLLA INSTRUMENTS GMBH & CO. KG
Germany
The RGB camera model uniScanRGB is a line scan camera and was developed for color machine vision applications. This RGB camera can be installed as stand-alone model or as add-on for LLA's HSI models e.g. for waste paper sorting.
Request for a quoteResults for
Pipe inspection systems - Import exportNumber of results
13 ProductsCountries
Company type