Pid temperature controllers - Import export

Most industrial process temperature control units work through the pressure exerted on the water of the process utilities: this is convenient in most “standard” cases, given the higher efficiency developed by the system. However, some critical process issues can make this type of operation difficult: this is the case of machines that leak fluids, or with leakage, and that it is not convenient to maintain on the spot. In such cases, it is therefore useful to work with a vacuum temperature control unit, which sucks in utility water. FTT PD water thermoregulators are flexible and effective systems, which can work under either pressure or vacuum depending on the peculiarities of the system. Any fluid losses are therefore minimized during operations. A simplicity of operation is also ensured by the touch-screen panel, also found on other Frigofluid temperature controllers. Models with an increased pump are also available for users characterized by high pressure drops.

Often the main critical issue for molding industries is not achieving the temperatures needed for their processes, but maintaining them over time. Hence the usefulness of temperature control units that not only send the fluids needed to do the job up to temperature, but are capable of subsequent self-tuning. This is the way FTT DC water temperature controllers operate, which wrap direct cooling to stabilize fluid grades after the desired temperature has been reached. This requires integration with a source of cooled water: a simple well or a chiller or cooling system (chiller or dry cooler). Our engineers are available to determine which cooling solution is the most effective and economical. Not only that. The management of these successive heating-cooling steps is easier when done with a touch screen: a feature with which FTT DC temperature controllers are equipped. Units in the FTT category are specially designed to condition molds.

FT water temperature controllers make it possible not only to cut down on the use of electrical power for heating (in fact, the heating elements remain off during steady-state operation), but they also make it possible to limit the cooling power spent on cooling by self-stabilizing through a process called Autotuning. This system also saves resources (water and energy) compared to units without them. They are designed to condition molds and cylinders for various industrial processes, including plastics and rubber molding and extrusion, and in the paper industry.

This set contains everything you need for room temperature measurement and control for the IdroFlow or IdroStream. Nano Top Nano Switch Nano Box Temperaturesensor 15m Motor ball valve Plug transformer 230V / 24V

With the Nano Tank single fermentation control you have a control unit directly on the tank in your brewery or winery. The actual and target display on the device allows a good temperature overview, nano tank, individual fermentation control directly on the tank, actual and target display Connection cable approx. 6 m with stranded wire, sleeve 7 mm x 240 mm Housing polycarbonate, can be networked with iFerm Nano Terminal With our modern single fermentation control Nano Tank you have a control unit directly on the tank in your brewery or winery. The actual and target display on the device allows a good temperature overview. The housing is made of polycarbonate and the rear sleeve is made of stainless steel. This enables simple assembly on a stem sleeve on the tank

Temperature control units started 1 up to 64 zones, Soft start stop options Manual or automatic switchable Smart selfoptimisation

PID Temperature Controller with Universal Input (TC, RTD)

The N480D-RRR is an efficient PID-temperature controller with an excellent price-performance ratio.

The N480D-RRR is an efficient PID-temperature controller with an excellent price-performance ratio.

The N480D-RRR is an efficient PID-temperature controller with an excellent price-performance ratio.

The N480D-RRR is an efficient PID-temperature controller with an excellent price-performance ratio.

Universal PID temperature controller with two separate programmable control outputs for applications with simultaneously active cooling and heating cycles. With auto tune, 5 alarm functions and ramp and soak program (up to 180 time segments).

Universal PID temperature controller with two separate programmable control outputs for applications with simultaneously active cooling and heating cycles. With auto tune, 5 alarm functions and ramp and soak program (up to 180 time segments).

A key attribute of plastic is its resistance to environmental stress cracking. It can be tested easily with AHP ESCR tester. According to ASTM D 1693 , digital timer , PID temperature controller, water circulation system, bending tool, brass sample holder , glass tube , sample cutting punch , sample notch press , sample bending tool

A key attribute of plastic is its resistance to environmental stress cracking. It can be tested easily with AHP ESCR tester. According to ASTM D 1693 , digital timer , PID temperature controller, water circulation system, bending tool, brass sample holder , glass tube , sample cutting punch , sample notch press , sample bending tool

Cutting-edge FLEXT Series Extruders Flexplas proudly offer a wide range of FLEXT Series Single-Screw Extruders, either as a stand-alone extrusion machine or as part of a complete extrusion-system. All Flexplas extruders are characterized by an open, robust, and proven construction and high-quality craftsmanship. Screw diameters from 20 to 120 mm and process lengths of 25D to 30D combined with the appropriate screw geometry guarantee excellent plasticizing and maximum output for all popular thermoplastics. Digital, self-optimizing PID temperature control and a blower cooling system ensure outstanding process stability. Other features include Sliding hopper, ceramic heaters, screw designed for every type of material, energy-saving system, digital extruder control with touch screen. Flexplas FLEXT-series extruders boast many a feature as standard. We also present various customized options for our customers to meet their production requirements.

1. Double frequency converter control, the bag length can be set and cut, no need to adjust the air, one step in place, saving time and film. 2. Man-machine interface, parameter setting is convenient and quick. 3. Fault self-diagnosis function, the fault display is clear at a glance. 4. High-sensitivity photoelectric eye color tracking, digital input sealing and cutting position, making the sealing and cutting position more accurate. 5. Temperature independent PID control, better suited to a variety of packaging materials. 6. Reciprocating end seal mechanism, the seal is more firm, and the seal cutter has no loss. 7. End sealing angling device, the bag shape is more beautiful, and the product grade is improved. 8. Positioning stop function, no sticking knife, no waste film. 9. The transmission system is simple, the work is more reliable, and the maintenance is more convenient. 10. All control is realized by software, which is convenient for function adjustment and technical upgrade.

Digital ON/OFF and PID Hatcher Controller Temperature and Humidity

•Available in different volume. •Controller with colored touch screen display. •Programmable PID microprocessor control system. •Programmable temperature and timer function •Temperature range: ambient temperature + 5 °C to 250 °C •Air forced convection •High temperature accuracy •2 chrome-plated racks •Beautiful and functional stainless steel Chamber •2 years guarantee worldwide

The waterproof HACCP-Thermometer with Pt1000-Penetration Temperature probe is the appropriate instrument for measuring temperature or process controls for the food industry, laboratories and production processes.