Pellet machine - Import export

ASCO’s automatic Dry Ice Machine BP425i produces slices in ten different thicknesses and two different types of pellets with a diameter of 3, 6, 10 or 16 mm (1/8, 1/4, 3/8 or 5/8 in) at the push of a button. Standard slice dimensions are 210 x 125 x 20 125 mm (8.3 x 4.9 x 0.8 4.9 in). Other slice/pellet dimensions are available on request. Depending on the setting, the production capacity ranges from 190 to 400 kg/h (418 to 882 lb/h). The dies for the production of different sizes do not have to be changed manually as they are already builtin and can be controlled at the touch screen panel. The automatic dry ice block, slice and pellet machine ASCO BP425i belongs to the ASCO iSeries line.

ASCO’s automatic Dry Ice Machine BP420i produces slices in 10 different thicknesses and 2 different types of pellets at the push of a button. The dies for the production of different sizes do not have to be changed manually as they are already built in and can be controlled at the touch screen panel. The BP420i features high density, fully automatic dry ice production for slices in ten different thicknesses. In addition, it is possible to produce pellets in two different sizes with a diameter of 3, 6, 10 or 16 mm (1/8, 1/4, 3/8 or 5/8 in). Standard slice dimensions are 210 × 125 × 20 70 mm (8.3 x 4.9 x 0.8 2.8 in). Other slice/pellet dimensions are available on request. Depending on the setting, the production capacity ranges from 240 to 400 kg/h (529 to 882 lb/h). The automatic dry ice block, slice and pellet machine ASCO BP420i belongs to the ASCO iSeries line.

DIE FOR A PELLET MACHINE, MAKING DIES AND ROLLS CUSTOM

ASCO CO2 Gas Revert Recovery Systems are engineered to efficiently recover the revert CO2 gas from ASCO Dry Ice Pellet and Block Machines which normally direct the revert (flash) gas to the atmosphere. When dry ice is produced the conversion rate from liquid CO2 to dry ice is approx. 4045 %. This means 5560 % is lost to the atmosphere. This conversation rate is a physical fact and therefore, unfortunately, not to change. With a CO2 Revert Recovery System, however, most of the CO2 can be recovered which leads to a final conversion rate of approx. 9095 %. This way, the dry ice production costs are reduced up to 50 %.

• Heats up the compressed air up to 100 °C (212 °F) • Total avoidance of condensation • Simple and accurate temperature control • Easy to fix on control unit • Also suitable for dry ice blasting machines with CO2 pellets • For the cleaning of switch cabinets, thin metal sheets, electronic components

In the injection moulding process TPE pellets are fed into the machine through a hopper and then into a heated barrel. The heat from the barrel turns the material into a liquid resin which is then injected into a closed mould under high pressure. After allowing the molten polymer to cool, the finished part can be removed from the mould. Injection moulding is a high-volume, high tooling cost process, the advanced properties of our TPE compounds deliver short cycle times allowing parts to be produced at a rapid rate. The information below is intended as a general overview, settings may vary depending on the specific grade selected. Please CONTACT US for detailed processing information Settings Equipment Conventional injection moulding machine Compression set At least 2:1. Special screws with short sections and higher compression ratios (3:1 to 4:1) may be good at low screw speeds Shrinkage Between 1.0% and 2.5% depending on the grade, type of application and location of the gate. Moul

Device components and operation principle The automatic machine for packing pellets in packages of polyethylene tape is equipped with a double-flow weighing dozer and independently forms a 3-seam package of polyethylene tape and pour in it ready dose of pellets, the package is sealed, cut off and step-by-step conveyed by the receiving transporter. The machine is equipped with a high-quality control system, which consists of the best components from Europe and is based on PLC Siemens. The machine is controlled using a touch-screen installed on the front of the control panel. From this display, you can monitor and configure the operation of the machine. All the parameters (like dose mass, dosing mode etc) are set at one terminal.